Day: April 2, 2022

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Cationic azaphthalocyanines bearing aliphatic tertiary amino substituents-Synthesis, singlet oxygen production and spectroscopic studies, published in 2006-09-30, which mentions a compound: 56413-95-7, mainly applied to cationic azaphthalocyanine tertiary amino substituent singlet oxygen generation, Application of 56413-95-7.

New cationic zinc azaphthalocyanines (AzaPc) were prepared using a statistical method of synthesis starting from 5,6-bis(2-diethylaminoethylsulfanyl)pyrazine-2,3-dicarbonitrile (A) and 5,6-bis(tert-butylsulfanyl)pyrazine-2,3-dicarbonitrile (B). All the six possible AzaPc derivatives were detected on TLC but only five of them were finally isolated using column chromatog. on silica (excluding AAAB type). The adjacent (AABB) and opposite (ABAB) isomers were well separated Singlet oxygen quantum yields (ΦΔ) were measured using the DPBF decomposition method. Values of ΦΔ in anhydrous DMF drastically decrease with the number of amino groups from 0.66 for BBBB type to 0.04 for AAAA type. The same dependence was observed in anhydrous DMF for the corresponding hydrochlorides. When DMF/water 95:5 added with HCl was used, the ΦΔ values for amino AzaPc increased to approx. 0.66. This suggests that solvation of the amino and Cl- ions plays an important role in the separation of the AzaPc mols. although no changes were found in UV-vis spectra. At least eight cationic charges are necessary for complete monomerization of AzaPc in water. Fewer charges lead to significant decrease of the absorption in the area of the Q-band and to pronounced dimeric character of the absorption spectrum.

As far as I know, this compound(56413-95-7)Application of 56413-95-7 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Molecular orbital treatment of a new type of heteroaromatic compound》. Authors are Brown, R. D.; Coller, B. A. W..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Recommanded Product: 3-Methyl-1H-pyrrole. Through the article, more information about this compound (cas:616-43-3) is conveyed.

I, II, III, and IV are treated; of these only II is known (Boeckelheide and Windgassen, C.A. 52, 16355i). The present results indicate that all 4 compounds would be stable once formed. Resonance energies, π-electron d., and energies of excited states are given as a function of the electronegativity of N. Definite predictions of the position of highest reactivity toward electrophiles can be made for I and II; it is position 1 in either case.

As far as I know, this compound(616-43-3)Recommanded Product: 3-Methyl-1H-pyrrole can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The three-dimensional configuration of the ester heterocycle is basically the same as that of the carbocycle. Compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile(SMILESS: N#CC1=NC(Cl)=C(Cl)N=C1C#N,cas:56413-95-7) is researched.Synthetic Route of C10H19NO3. The article 《Stable and Easily Accessible Functional Dyes: Dihydrotetraazaanthracenes as Versatile Precursors for Higher Acenes》 in relation to this compound, is published in Chemistry – A European Journal. Let’s take a look at the latest research on this compound (cas:56413-95-7).

A series of new dihydrotetraazaanthracenes and one new dihydrotetraazatetracene as substances for applications in organoelectronic devices and as suitable building blocks for higher azaacenes was synthesized. The condensation of aromatic diamines with dichlorodicyanopyrazine led to these tricyclic/tetracyclic compounds Syntheses of N-substituted phenylenediamines were developed to enable the introduction of multiple functional groups such as ester, amino, or nitro groups on the chromophoric system. Relationships between the structure and the spectroscopic properties could be derived from UV/Vis absorption and fluorescence spectroscopy, and by DFT and TD-DFT calculations of mol. and aggregate structures. The absorption spectra are dominated by π-π* transitions of the single mols., whereas aggregation needs to be taken into account to obtain reasonable agreement between theory and experiment in certain cases. Single-crystal x-ray analyses were carried out to examine the morphol. and solid packing effects. Finally, a dihydrotetraazaanthracene was used as a building-block to create a mesoionic octaazapentacene.

As far as I know, this compound(56413-95-7)Synthetic Route of C6Cl2N4 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Donald, D. S.; Cheng, L. T.; Desiraju, G.; Meredith, G. R.; Zumsteg, F. C. published the article 《New second-order nonlinear optical organic crystals》. Keywords: nonlinear optical organic crystal; benzonitride derivative nonlinear optical; pyrazine derivative nonlinear optical.They researched the compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile( cas:56413-95-7 ).Formula: C6Cl2N4. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:56413-95-7) here.

The design of mol. crystals with specific optical properties, which are thought to arise from constituent mols.’ polarizability properties, is a desirable but currently unachievable goal. One can partially achieve this goal by choosing compounds with specific mol. attributes and empirically determining the manner in which these are translated into crystal properties. Besides the fact that there are no certain rules for prediction of crystal packing arrangements, where is also a problem in specifying mol. properties from what are today incomplete polarizability structure-property relationships. We have, realizing these limitations, identified polarizability structure-property relationships. We have, realizing these limitations, identified new mol. crystals by a nonlinear optical (powder-SHG) scouting-screening program from lists of compounds chosen because of desirable mol. properties. Examination of successful materials has revealed interesting, new alignment motifs. Some of these materials, a set of halogen and cyano derivatives of aromatic compounds, are described relating properties and structures of mols. and crystals. In particular, the orientation directing influence of intermol. halogen-cyano interactions and the use of heterocyclic compounds to improve transparency in the near IR and in the blue and near UV spectral regions are demonstrated.

As far as I know, this compound(56413-95-7)Formula: C6Cl2N4 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Synthesis called Syntheses and characterization of push-pull tetrapyrazino[2,3-b]indoloporphyrazines, Author is Jaung, Jae-Yun; Matsuoka, Masaru; Fukunishi, Koushi, which mentions a compound: 56413-95-7, SMILESS is N#CC1=NC(Cl)=C(Cl)N=C1C#N, Molecular C6Cl2N4, HPLC of Formula: 56413-95-7.

The synthesis of tetrakis(indolopyrazino)porphyrazines by ring-closure reactions of 2,3-dichloro-5,6-dicyanopyrazine with enamines is described. Alkylated tetrakis(indolopyrazino)porphyrazines have push-pull intramol. charge-transfer chromophoric systems and show good solubility in most organic solvents. Large spectral changes caused by mol. aggregation of these dyes affected by solvent polarity and temperature were studied.

As far as I know, this compound(56413-95-7)HPLC of Formula: 56413-95-7 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《A suitable solvent for molecular-weight determinations according to Rast》. Authors are Wendt, Gerhard.The article about the compound:cis-4-Aminocyclohexane carboxylic acidcas:3685-23-2,SMILESS:N[C@H]1CC[C@H](CC1)C(O)=O).COA of Formula: C7H13NO2. Through the article, more information about this compound (cas:3685-23-2) is conveyed.

The lactam (I) of cis-hexahydro-p-aminobenzoic acid (II), m. 196°, results in 3.3-g. yield from 5 g. of the mixture of cis- and trans-II. For the separation of the 2 isomers of II, the hydrogenation product from 4 g. of p-H2NC6H4CO2H in 20 cc. H2O is treated with 180 cc. absolute EtOH to precipitate 1.9 g. crude cis-II, 2 crystallizations of which from dilute EtOH give the pure acid, m. 304-5°, sublimes 210-20°/6 × 10-4 mm.; contrary to the observation of Orthner and Hein (C. A. 27, 4776) the acid melts before sublimation; their transformation of the cis to the trans acid could not be verified. Addition of 400 cc. ether to the filtrate from the cis acid gives (standing 24 hrs.) 1.9 g. crude trans acid; this is purified by solution in 10 cc. H2O and precipitation with 125 cc. absolute EtOH; it m. 186-8° (decomposition), sublimes 210-20°/3 × 10-4 mm. I is a suitable substitute for camphor in the mol.-weight determination according to Rast. The m.-p. lowering constant is 40 (the same as camphor); the molar heat of melting is 1.37 kg.-cal. (for camphor 1.55 kg.-cal.). Because of the solubility in I, it is specially suitable for the determination of the mol. weights of di- and tripeptides (e. g., Me p-aminobenzoyl-p-aminobenzoate, Me p-nitrobenzoyl-p-aminobenzoyl-p-aminobenzoate, leucylglycine, glycylleucine), disaccharides (e. g., saccharose and cellobiose) and nucleosides (e. g., uridine and adenosine), most of which are insoluble in camphor. However, certain compounds (uric acid, creatine, glycylglycine) are insoluble in I.

As far as I know, this compound(3685-23-2)COA of Formula: C7H13NO2 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Activation of the amide group by acylation. V. Inclusion of amino acid residues into linear and cyclic peptides》. Authors are Antonov, V. K.; Agadzhanyan, Ts. E.; Telesnina, T. R.; Shemyakin, M. M..The article about the compound:cis-4-Aminocyclohexane carboxylic acidcas:3685-23-2,SMILESS:N[C@H]1CC[C@H](CC1)C(O)=O).Formula: C7H13NO2. Through the article, more information about this compound (cas:3685-23-2) is conveyed.

cf. CA 63, 16255f. Dipeptides and lactams acylated at the amide-N by amino acid residues were shown to isomerize to give corresponding linear or cyclic peptides through intermediate azocyclols, which can also undergo dehydration to form acylamidines. The transannular interaction of amide groups in 9-10-membered cyclopeptides can also result in similar acylamidines; such a process takes place during mass spectrometry of cyclopeptides. N-Phthaloylglycylglycine Et ester and azidoacetyl chloride refluxed in MePh 10 hrs. gave after filtration and evaporation 46% N-azidoacetyl-N’-phthaloylglycylglycine Et ester, m. 115-16°. Similarly were prepared 36% N-azidoacetyl-N’-phthaloylglycyl-L-leucine Et ester, m. 118-19°. The former treated with 28% HBr in AcOH overnight in the cold, diluted with Et2O, and the resulting precipitate (I) treated with Et3N in tetrahydrofuran gave 70% N-phthaloylglycylglycylglycine Et ester, m. 228-9°. Similarly was prepared N-phthaloylglycylglycyl-L-leucine Et ester, m. 155-6°. I and H2O in 5 min. gave 73% 2-phthaloylaminomethyl-3-carbethoxymethyl-Δ1-imidazolin-4-one, m. 153-4°. Similarly was obtained 63% 2-phthaloylaminomethyl-3-(1-carbethoxy-3-methylbutyl)-Δ1-imidazolin-4-one, m. 117-18°. Carbobenzoxy-β-alanyl chloride and butyrolactam in Et2O were treated at 5° with Et3N to yield in 1 day at 20° 58% N-carbobenzoxy-β-alanylbutyrolactam (II), m. 94-5°. Similar reaction with valerolactam gave N-carbobenzoxy-β-alanylvalerolactam, m. 60-1°. Similarly was prepared 50% N-carbobenzoxy-β-alanylcaprolactam, m. 60-1°. II hydrogenated over Pd in Et2O gave 38% cyclo(β-alanyl-γ-aminobutyryl) (III), m. 173°, also formed from II by treatment with 27% HBr in AcOH 45 min.; HBr salt m. 119-20°. Similarly was obtained cyclo(β-alanyl-δ-aminovaleryl) (IV), m. 187°, and 61% cyclo(β-alanyl-ε-aminocaproyl) (V), m. 259°. III heated in xylene 1 hr. under azeotropic conditions of H2O removal gave 68% 1,2-trimethylene-6-oxo-1,4,5,6-tetrahydropyrimidine (IIIa), b12 152-4°. IV similarly gave 45% 1,2-tetramethylene-6-oxo-1,4,5,6-tetrahydropyrimidine (IVa), b12 160° (no reaction took place in ο-Cl2C6H4 in 4 hrs. with V). III heated with H2O 5 min. gave 80% N-[1-aza-1-cyclopenten-2-yl]-3-aminopropionic acid (VI), decomposed 186-7°. H2NCH2CH2CO2H in MeOH was treated with O-methylbutyrolactam and gave after heating 10 min. 97% VI. Similarly O-methylvalerolactam gave 95% N-[1-aza-1-cyclohexen-2-yl]-3-aminopropionic acid, m. 186°, which heated with removal of H2O in Cl2C6H4 gave 91% IVa. Similarly O-methylcaprolactam gave 93% N-[1-aza-1-cyclohepten-2-yl]-3-aminopropionic acid, m. 200-1°, which heated in Cl2C6H4 gave 12% cyclo(β-alanyl-ε-aminocapropyl) and 80% 1,2-pentamethylene-6-oxo-1,4,5,6-tetrahydropyrimidine, b10 185-90°, m. 35°. Heating VI in xylene with removal of H2O gave IIIa. The latter kept with H2O 2 days gave VI, while H2O-Ag2O gave 32% VI and 54% cyclo(β-alanyl-γ-aminobutyryl). The above analogs of VI reacted similarly.

As far as I know, this compound(3685-23-2)Formula: C7H13NO2 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

COA of Formula: C6Cl2N4. The protonation of heteroatoms in aromatic heterocycles can be divided into two categories: lone pairs of electrons are in the aromatic ring conjugated system; and lone pairs of electrons do not participate. Compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile, is researched, Molecular C6Cl2N4, CAS is 56413-95-7, about Structure-Property Relationships and Nonlinear Optical Effects in Donor-Substituted Dicyanopyrazine-Derived Push-Pull Chromophores with Enlarged and Varied π-Linkers. Author is Bures, Filip; Cermakova, Hana; Kulhanek, Jiri; Ludwig, Miroslav; Kuznik, Wojciech; Kityk, Iwan V.; Mikysek, Tomas; Ruzicka, Ales.

Thirteen new, stable, push-pull systems featuring dimethylamino and pyrazine-2,3-dicarbonitrile moieties as the donor and acceptor, resp., and systematically extended and varied π-linkers were prepared and studied. Evaluation of the measured UV/Vis spectra, electrochem. data (cyclic voltammetry, rotating disk voltammetry, and polarog.), x-ray data, and exptl. determined and calculated hyperpolarizability values enabled structure-property studies; these revealed some important structural features that affected the efficiency of intramol. charge-transfer and nonlinear optical properties in this class of heterocyclic push-pull chromophores. The charge-transfer transition was most significantly affected by structural features such as π-linker length, chromophore planarity, and the number of 1,4-phenylene/ethynylene subunits in the π-linker.

As far as I know, this compound(56413-95-7)COA of Formula: C6Cl2N4 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Category: chiral-oxygen-ligands. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Analysis of the NMR spectrum of 3-methylpyrrole. Author is Fukui, H.; Shimokawa, S.; Sohma, J.; Twadare, T.; Esumi, N..

Earlier work (F., S., S., 1970) on pyrrole and on its 2-derivatives is extended to 3-methylpyrrole. Observed and simulated spectra are shown for the N-decoupled spectra at 60 MHZ, and for the N-H proton in which the 14N nucleus and Me protous were decoupled and the 5-proton was perturbed. The chem. shills and coupling constants are tabulated. The best simulated spectrum is a 7-spin system. The compound was dissolved in acetone-d, with Me4Si as internal reference

As far as I know, this compound(616-43-3)Category: chiral-oxygen-ligands can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Synthesis of furan amines and their catalytic conversion into five-membered nitrogenous heterocycles》. Authors are Shuikin, N. I.; Petrov, A. D.; Glukhovtsev, V. G.; Bel’skii, I. F.; Skobtsova, G. E..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Category: chiral-oxygen-ligands. Through the article, more information about this compound (cas:616-43-3) is conveyed.

CH2:CHCHO added to sylvan in AcOH in the presence of hydroquinone at 40° gave after 2 hrs. 65% 2-methyl-5-(3-oxopropyl)furan, b4 58°, n20D 1.4762, d20 1.0360; with 50% H2SO4 as a catalyst, the yield was 43%. The latter catalyst with crotonaldehyde similarly gave 53% 2-methyl-5-(1-methyl-3-oxopropyl)furan, b3 67°, 1.4730, 1.0093, while mesityl oxide gave 75% 2-methyl-5-(1,1-dimethyl-3-oxobutyl)furan, b2 61°, 1.4700, 0.9747. These carbonyl derivatives were hydrogenated in MeOH saturated with NH3 over Raney Ni at 100-50 atm. and 80° and gave: 2-methyl-5-(3-aminopropyl)-furan, b6 82°, 1.4840, 0.9758; 2-methyl-5-(1-methyl-3-amino-propyl)furan, b7 85°, 1.4800, 0.9591; 2-methyl-5-(1,1-dimethyl-3-aminobutyl)furan, b4 75°, 1.4741, 0.9365. The latter was hydrogenated at 250° over 15% Pt-asbestos to 2,4,4-trimethyl-5-butylpyrrolidine, b5 39°, 1.4444, 0.8319. Raman spectra of the products were reported.

As far as I know, this compound(616-43-3)Category: chiral-oxygen-ligands can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate