Month: April 2022

Most of the natural products isolated at present are heterocyclic compounds, so heterocyclic compounds occupy an important position in the research of organic chemistry. A compound: 3685-23-2, is researched, SMILESS is N[C@H]1CC[C@H](CC1)C(O)=O, Molecular C7H13NO2Journal, Pharmaceutical Chemistry Journal (Translation of Khimiko-Farmatsevticheskii Zhurnal) called Synthesis and antitumor activity of nonsymmetric phosphoric acid triamides, Author is Kosykhova, L.; Palaima, A.; Stumbryavichyute, Z., the main research direction is phosphoric acid triamide nonsym preparation acute toxicity antitumor activity; amide phosphoric acid nonsym preparation acute toxicity antitumor activity.Reference of cis-4-Aminocyclohexane carboxylic acid.

R1R2P(O)NHR3 (R1, R2 independently = aziridino, N(CH2CH2Cl)2, NMe2, morpholino or NHCH2CH2OH; R3 = 4-R-substituted cyclohexyl (R = H, cis- and trans-CO2H, cis- and trans-CO2Et)) were prepared and tested for acute toxicity and antitumor activity. All the 12 tested compounds possess a lower antitumor activity as compared to that of the reference drug thiophosphamide. The antitumor activity of nonsym. phosphoric acid triamides is determined for the most part by the nature of amide residues attached at the P atom. The antitumor effect can be varied within a broad range by changing this residue, the maximum antitumor activity being inherent in nonsym. triamides containing the ethylenimine residue.

Compound(3685-23-2)Reference of cis-4-Aminocyclohexane carboxylic acid received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(cis-4-Aminocyclohexane carboxylic acid), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Pyrrole Syntheses from Amino Ketones with Ketones and Ketone Esters》. Authors are Piloty, O.; Hirsch, P..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Computed Properties of C5H7N. Through the article, more information about this compound (cas:616-43-3) is conveyed.

The following pyrrole derivatives have been prepared by treating aqueous solutions of the HCl salts of amino ketones containing an excess of alk. with a ketone or ketone ester and allowing to stand a long time at a slightly elevated temperature in closed vessels. α-β’-Dimethylpyrrole, from Ac2NH2.HCl and AcMe; yield, 30%. α-Phenyl-β’-methylpyrrole, from 10 g. AcCH2NH2.HCl and 5 g. AcPh, m. 152°; yield, 1 g. α,β,β’-Trimethylpyrrole, from AcEt; yield, 28%. α-Ethyl-β,β’-dimethylpyrrole, b10 77-8° (yield, 0.4 g. from 14 g. AcCH3NH2.HCl and 10 g. Et2CO); picrjate, bright yellow, striated prisms, m. 122.5°. α,β,α’-Trimethylpyrrole, from AcCHMeNH2 and AcMe; yield, 50%. Some tetramethylpyrazine is formed in this reaction. AcCHMeNH2 and AcEt react only slowly and incompletely; the chief product is the pyrazine, but a little α,β,α’,β’-tetramethylpyrrole picrate (cf. Fischer and Bartholomäus, C. A., 7, 780) was isolated. Et α,β’-dimethylpyrrole-β-carboxylate, from AcCH2NH2 and AcCH2CO2Et. Monoethyl β-methylpyrrole-α’,β’-dicarboxylate, from 19 g. HO2CCOCH2CO2Et and 11 g. AcCH2NH2.HCl, monoclinic prisms, m. 196° (yield, 2-3 g.), converted by 20 hrs. b. with excess of 20% KOH into β-methylpyrrole-β’ (or α’)-carboxylic acid, flocks, m. 149°, losing CO2 and forming β-methylpyrrole, b11 45°. Monoethyl α,β-dimethylpyrrole-α’,β’-dicarboxylate, from AcCHMeNH2 and HO2CCOCH2CO2Et, prisms, m. 201° (loss of CO2). α,β-Dimethylpyrrole-β’ (or α’)-carboxylic acid, m. 188°. α,β-Dimethylpyrrole, b11 62°; picrate, bright yellow, felted needles, m. 146-5°; contrary to all other pyrrole derivatives, it has the comp. C18H21O7N5, i. e., 2 mols. pyrrole: 1 mol. picric acid.

Compound(616-43-3)Computed Properties of C5H7N received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(3-Methyl-1H-pyrrole), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Lee, Bum Hoon; Jaung, Jae Yun; Jeong, Sung Hoon researched the compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile( cas:56413-95-7 ).Category: chiral-oxygen-ligands.They published the article 《Synthesis and dyeing properties of dicyanopyrazine dyes》 about this compound( cas:56413-95-7 ) in Journal of the Korean Fiber Society. Keywords: cyanopyrazine dye preparation use polyamide polyester. We’ll tell you more about this compound (cas:56413-95-7).

Reaction of 2,3-dichloro-5,6-dicyanopyrazine with various Fischer’s base type enamines gave the corresponding 2-chloro-5,6-dicyanopyrazine derivatives The reactive-disperse dyes showed large differences in λmax from solution to solid state resulting from strong intermol. π-π interactions. These dyes have rather small mol. size but have a strong intramol. charge-transfer chromophoric system. The absorption maxima of these compounds were observed at 463∼560 nm. The electronic character of the substituents in the dyes strongly affects their absorption spectra, producing bathochromic shifts depending on both the basicity of the heterocyclic moiety and the enlargement of the π-conjugated system. The dyeability of 2 of the dyes toward polyester and nylon fiber were generally good. Wash, perspiration, and rubbing fastness were excellent, while light fastness was poor, probably due to the oxidation of the enamine moiety.

Compound(56413-95-7)Category: chiral-oxygen-ligands received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Stereochemical investigations of 1,4-substituted cyclohexane derivatives. 4-Hydroxy- and 4-aminocyclohexane-1-carboxylic acid and their esters; and 4-hydroxy-1-hydroxymethylcyclohexane》. Authors are Schneider, Woldemar; Huettermann, A..The article about the compound:cis-4-Aminocyclohexane carboxylic acidcas:3685-23-2,SMILESS:N[C@H]1CC[C@H](CC1)C(O)=O).Electric Literature of C7H13NO2. Through the article, more information about this compound (cas:3685-23-2) is conveyed.

Malonic ester synthesis with ethyl β-chloropropionate, followed by ring closure of the product obtained gave 4-hydroxy-1-cyclohexanone (I). Hydrogenation of I (Raney-Ni, atm. pressure, room temperature) in alk. medium gave cis-4-hydroxycyclohexane-1-carboxylic acid (cis-II), m. 152°; Et ester, (cis-III) b12 130°. Hydrogenation of ethyl 4-hydroxybenzoic acid (Raney-Ni, 150 atm., 150°) gave trans-III, b13 139-140°, saponification of which gave the trans-II, m. 119.5°. Reduction of trans-III with Na-EtOH or LiAlH4, gave a cis-trans mixture of 4-hydroxy-1-hydroxymethylcyclohexane (IV), from which the trans isomer (V) was separated, m. 104°; the cis isomer (VI) was recovered by distillation from the residue. Hydrogenation of ethyl 4-aminobenzoic acid (Ru-C, 110 atm., 80°) gave a cis-trans mixture of 4-amino-1-carbethoxycyclohexane (VII), which was separated by distillation, giving cis-VII and trans-VII. The exptl. determined dipole moments (μ in Debye units) of these compounds are: cis-II 2.10 ± 0.1, trans-II 246 ± 0.002, cis-III 2.86 ± 0.03, trans-III 2.56 ± 0.04, VI 2.29 ± 0.02, V 2.60 ± 0.1, cis-VII 2.60 ± 0.01, and trans-VII 2.44 ± 0.02.

Compound(3685-23-2)Electric Literature of C7H13NO2 received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(cis-4-Aminocyclohexane carboxylic acid), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about TD-GC-MS investigation of the VOCs released from blood plasma of dogs with cancer.Quality Control of 3-Methyl-1H-pyrrole.

An anal. TD-GC-MS method was developed and used for the assessment of volatile organic compounds (VOCs) released from the blood plasma of dogs with/without cancer. VOCs released from 40 samples of diseased blood and 10 control samples were compared in order to examine the difference between both sample groups that were showing qual. similar results independent from the disease’s presence. However, mild disturbances in the spectra of dogs with cancer in comparison with the control group were observed, and six peaks (tentatively identified by comparison with mass spectral library as hexanal, octanal, toluene, 2-butanone, 1-octen-3-ol and pyrrole) revealed statistically significant differences between both sample groups, thereby suggesting that these compounds are potential biomarkers that can be used for cancer diagnosis based on the blood plasma TD-GC-MS anal. Statistical comparison with the application of principal component anal. (PCA) provided accurate discrimination between the cancer and control groups, thus demonstrating stronger biochem. perturbations in blood plasma when cancer is present.

Compound(616-43-3)Quality Control of 3-Methyl-1H-pyrrole received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(3-Methyl-1H-pyrrole), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《A suitable solvent for molecular-weight determinations according to Rast》. Authors are Wendt, Gerhard.The article about the compound:cis-4-Aminocyclohexane carboxylic acidcas:3685-23-2,SMILESS:N[C@H]1CC[C@H](CC1)C(O)=O).Recommanded Product: 3685-23-2. Through the article, more information about this compound (cas:3685-23-2) is conveyed.

The lactam (I) of cis-hexahydro-p-aminobenzoic acid (II), m. 196°, results in 3.3-g. yield from 5 g. of the mixture of cis- and trans-II. For the separation of the 2 isomers of II, the hydrogenation product from 4 g. of p-H2NC6H4CO2H in 20 cc. H2O is treated with 180 cc. absolute EtOH to precipitate 1.9 g. crude cis-II, 2 crystallizations of which from dilute EtOH give the pure acid, m. 304-5°, sublimes 210-20°/6 × 10-4 mm.; contrary to the observation of Orthner and Hein (C. A. 27, 4776) the acid melts before sublimation; their transformation of the cis to the trans acid could not be verified. Addition of 400 cc. ether to the filtrate from the cis acid gives (standing 24 hrs.) 1.9 g. crude trans acid; this is purified by solution in 10 cc. H2O and precipitation with 125 cc. absolute EtOH; it m. 186-8° (decomposition), sublimes 210-20°/3 × 10-4 mm. I is a suitable substitute for camphor in the mol.-weight determination according to Rast. The m.-p. lowering constant is 40 (the same as camphor); the molar heat of melting is 1.37 kg.-cal. (for camphor 1.55 kg.-cal.). Because of the solubility in I, it is specially suitable for the determination of the mol. weights of di- and tripeptides (e. g., Me p-aminobenzoyl-p-aminobenzoate, Me p-nitrobenzoyl-p-aminobenzoyl-p-aminobenzoate, leucylglycine, glycylleucine), disaccharides (e. g., saccharose and cellobiose) and nucleosides (e. g., uridine and adenosine), most of which are insoluble in camphor. However, certain compounds (uric acid, creatine, glycylglycine) are insoluble in I.

Compound(3685-23-2)Recommanded Product: 3685-23-2 received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(cis-4-Aminocyclohexane carboxylic acid), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Product Details of 616-43-3. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Improved preparation of 3-methylpyrrole. Laboratory note. Author is Elguero, Jose; Jacquier, Robert; Shimizu, Bernard.

An improved synthesis of 3-methylpyrrole (I) and the N.M.R. spectra of the intermediates and product are given. Thus, 20 g. 3-carbethoxy-4-methyl-2-pyrrolecarboxylic acid is refluxed 1 hr. with 300 ml. 40% KOH, cooled, acidified with dilute HCl, filtered, washed with water, and dried to give 70% 4-methylpyrrole-2,3-dicarboxylic acid (II), m. 225°. II (12 g.) is added to 1 g. powd. Cu and heated under 50 mm. to dist. 87% I.

Compound(616-43-3)Product Details of 616-43-3 received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(3-Methyl-1H-pyrrole), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called 5,6-Dicyano-2,3-dithiopyrazine (dcdmp) chemistry: synthesis and crystal structure of Au(III)(dcdmp)2 complexes and 2,3,7,8-tetracyano-1,4,6,9-tetraazathianthrene, published in 2004-05-06, which mentions a compound: 56413-95-7, Name is 5,6-Dichloropyrazine-2,3-dicarbonitrile, Molecular C6Cl2N4, Application In Synthesis of 5,6-Dichloropyrazine-2,3-dicarbonitrile.

As an effort to explore new complexes of the 2,3-dicyano-5,6-dimercaptopyrazine (dcdmp) ligand with different transition metals, different salts containing both the Au(dcdmp)2 – complex and the new species 2,3,7,8-tetracyano-1,4,6,9-tetraazathianthrene (tctata), were obtained and characterized. Bu4N[Au(dcdmp)2] crystallizes in monoclinic space group C2/c, Z = 8 with a 35.147(4), b 9.527(1), c 21.792(2) Å and β 109.626(8)°. Its crystal structure consist of almost regular columns of [Au(dcdmp)2]-, stacked along b, surrounded by Bu4N+ cations. Bu4N[AuBr2(tctata)] crystallizes in triclinic space group P1̅, Z = 2, with a 10.986(1), b 13.230(2), c 13.791(1) Å, α 79.150(9), β 69.663(6), γ 70.254(9)°. The crystal packing is made by zigzag chains of tctata separated by layers of cations, with AuBr2 anions located in alternated cavities between the tctata chains and the cation layers. At last, Bu4N[Au(dcdmp)2].(tctata) crystallizes in monoclinic space group P21/n, Z = 4, with a 10.693(2), b 40.308(7), c 10.870(1) Å, β 92.16(1)°. Its crystal structure can be seen has a mix of those of the two preceding compounds It consists of bidimensional layers composed of out of registry parallel zigzag chains of alternating tctata and [Au(dcdmp)2]- units. The adjacent layers are separated by layers of [Bu4N]+. In the last two compounds the tctata appears as a planar mol.

Compound(56413-95-7)Application In Synthesis of 5,6-Dichloropyrazine-2,3-dicarbonitrile received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Reference of 5,6-Dichloropyrazine-2,3-dicarbonitrile. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile, is researched, Molecular C6Cl2N4, CAS is 56413-95-7, about Synthesis and comparison of photodynamic activity of alkylheteroatom substituted azaphthalocyanines. Author is Zimcik, Petr; Miletin, Miroslav; Kostka, Miroslav; Schwarz, Jan; Musil, Zbynek; Kopecky, Kamil.

Optimal reaction conditions were developed for synthesis of octakis(butylamino), octakis(butylsulfanyl) and octakis(butoxy) azaphthalocyanines (AzaPc’s) with central metal Mg, Zn and metal-free. Their photodynamic activity was measured and compared as a dye-sensitized photooxidation of 1,3-diphenylisobenzofuran (DPBF). Compounds with alkylamino substituent are very poor producers of the singlet oxygen and therefore not suitable as sensitizers for photodynamic therapy (PDT). On the other hand, compounds with alkylsulfanyl and alkoxy substituents possess very good photodynamic activity and are suitable for PDT.

Compound(56413-95-7)Reference of 5,6-Dichloropyrazine-2,3-dicarbonitrile received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Application In Synthesis of 3-Methyl-1H-pyrrole. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Renewable N-Heterocycles Production by Thermocatalytic Conversion and Ammonization of Biomass over ZSM-5. Author is Xu, Lujiang; Yao, Qian; Deng, Jin; Han, Zheng; Zhang, Ying; Fu, Yao; Huber, George W.; Guo, Qingxiang.

Chem. conversion of biomass to value-added products provides a sustainable alternative to the current chem. industry that is predominantly dependent on fossil fuels. N-Heterocycles, including pyrroles, pyridines, and indoles, etc., are the most abundant and important classes of heterocycles in nature and widely applied as pharmaceuticals, agrochems., dyes, and other functional materials. However, all starting materials for the synthesis of N-heterocycles currently are derived from crude oil through complex multi-step-processes and sometimes result in environmental problems. In this study, we show that N-heterocycles can be directly produced from biomass (including cellulose, lignocelluloses, sugars, starch, and chitosan) over com. zeolites via a thermocatalytic conversion and ammonization process (TCC-A). All desired reactions occur in one single-step reactor within seconds. The production of pyrroles, pyridines, or indoles can be simply tuned by changing the reaction conditions. Meanwhile, N-containing biochar can be obtained as a valuable coproduct. We also outline the chem. for the conversion of biomass into heterocycle mols. by the addition of ammonia into pyrolysis reactors demonstrating how industrial chems. could be produced from renewable biomass resources. Only minimal biomass pretreatment is required for the TCC-A approach.

Compound(616-43-3)Application In Synthesis of 3-Methyl-1H-pyrrole received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(3-Methyl-1H-pyrrole), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate