Category: 616-43-3

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Molecular orbital treatment of a new type of heteroaromatic compound》. Authors are Brown, R. D.; Coller, B. A. W..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Recommanded Product: 3-Methyl-1H-pyrrole. Through the article, more information about this compound (cas:616-43-3) is conveyed.

I, II, III, and IV are treated; of these only II is known (Boeckelheide and Windgassen, C.A. 52, 16355i). The present results indicate that all 4 compounds would be stable once formed. Resonance energies, π-electron d., and energies of excited states are given as a function of the electronegativity of N. Definite predictions of the position of highest reactivity toward electrophiles can be made for I and II; it is position 1 in either case.

As far as I know, this compound(616-43-3)Recommanded Product: 3-Methyl-1H-pyrrole can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Conjugated Macrocycles Related to the Porphyrins. 25.Proton NMR Spectroscopic Evidence for a Preferred [18]Annulene Substructure in Carbaporphyrins from the Magnitude of Selected 4JH,H CH:C-CH3 Coupling Constants, published in 2003-03-07, which mentions a compound: 616-43-3, mainly applied to benzocarbaporphyrin preparation NMR, Recommanded Product: 3-Methyl-1H-pyrrole.

Two new benzocarbaporphyrins with four or five alkyl substituents have been synthesized by the “”3 + 1″” MacDonald methodol. At lower temperatures, the proton NMR spectrum of the asym. substituted carbaporphyrin I gave two NH resonances, while carbaporphyrin II, which retains a plane of symmetry, gave only one resonance of this kind. As no addnl. peaks were seen for the remaining protons, these data strongly support the proposal that a single tautomer predominates in solution where the two NH protons flank the interior CH. Carbaporphyrin I, which has a CH:CMe unit on the pyrrolic ring opposite the indene moiety, gave a long-range coupling constant of 4JMe,H = 1.3-1.4 Hz. On the other hand, the CH:CMe units of II, which correspond to the pyrrole rings on each side of the carbocyclic moiety, gave 4JMe,H = 0.9-1.0 Hz. These values are in accord with those expected if the exterior carbon-carbon bonds of the pyrrole units next to the indene ring are part of a fully delocalized 18π electron system, while the C:C bond of the remaining pyrrole ring retains substantial olefinic character.

This literature about this compound(616-43-3)Recommanded Product: 3-Methyl-1H-pyrrolehas given us a lot of inspiration, and I hope that the research on this compound(3-Methyl-1H-pyrrole) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Deprotonation of Methyl-Substituted, Five-Membered Aromatic Molecules: A Surprising Case of Mixed Conjugation, Rehybridization, and Induction Contributions, published in 2014-09-05, which mentions a compound: 616-43-3, mainly applied to methyl substituent aromatic deprotonation conjugation rehybridization induction DFT MP2, Name: 3-Methyl-1H-pyrrole.

Methyl-substituted, six-membered aromatic mols. are deprotonated to benzylic carbanions, which are stabilized by π conjugation. In contrast, deprotonation of 3(5)-methylpyrazole (NH protected) occurs at an endocylic CH group. Computational analyses showed that the reduction of π conjugation in substituted five-membered rings plays a major role, while the reduced bond angles, in addition to the strengthened induction of Csp2 vs. Csp3, further favor the deprotonation of endocyclic carbon sites rather than that of the Me group.

This literature about this compound(616-43-3)Name: 3-Methyl-1H-pyrrolehas given us a lot of inspiration, and I hope that the research on this compound(3-Methyl-1H-pyrrole) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: 3-Methyl-1H-pyrrole( cas:616-43-3 ) is researched.Related Products of 616-43-3.Potapov, V. K.; Yuzhakova, O. A. published the article 《Photoionization and electron structure of pyrrole and methylpyrroles》 about this compound( cas:616-43-3 ) in Doklady Akademii Nauk SSSR. Keywords: pyrrole photoionization electronic structure; photoionization pyrrole; electronic structure pyrrole. Let’s learn more about this compound (cas:616-43-3).

The appearance potentials were tabulated along with the ionic form for pyrrole, its 1-Me, 1-Bu, 2-Me, 3-Me and 2,4-di-Me analogs, from mass spectrometric data and from photoionization plots. The peculiarity of all these compounds was the existence of sharp rises of ionization thresholds which determine the position of the electronic 0-0 transition corresponding to the 1st adiabatic ionization potential of the mol. The 1st ionization potential of pyrrole is 8.2 ev, which corresponds to electron removal from the upper mol. 1a2 π3 orbital which has a node at the N atom and maximum electron d. at C atoms adjacent to N. The 2nd ionization potential of 9.08 eV corresponds to electron removal from the 2b1 π2 orbital which has maximum electron d. at C atoms not connected to N and a min. at C atoms which are connected to N. The variations of these values with alteration of structure are briefly discussed.

There is still a lot of research devoted to this compound(SMILES：CC1=CNC=C1)Related Products of 616-43-3, and with the development of science, more effects of this compound(616-43-3) can be discovered.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Synthetic Route of C5H7N. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Steric and Electronic Effects in Methyl-Substituted 2,2′-Bipyrroles and Poly(2,2′-Bipyrrole)s: Part I. Synthesis and Characterization of Monomers and Polymers. Author is Benincori, Tiziana; Brenna, Elisabetta; Sannicolo, Franco; Zotti, Gianni; Zecchin, Sandro; Schiavon, Gilberto; Gatti, Carlo; Frigerio, Giovanni.

The effects of N- and C-Me substitution on the elec. and spectral properties of pyrrole, 2,2′-bipyrrole, and the corresponding polymers were investigated. A whole series of monomethyl and N- or Cβ-dimethyl-substituted 2,2′-bipyrroles was synthesized, and the electrochem. and spectral properties of all the compounds were investigated under identical testing conditions. The corresponding polymers were prepared by electrochem. anodic oxidation under comparable exptl. conditions and their spectroscopic and conductivity properties evaluated for comparison. The higher degree of efficiency in transmission of electronic effects associated with Me substitution at Cβ with respect to substitution at N was clearly demonstrated. The influence of the symmetry of the starting monomer (C2v or Cs) on the elec. properties of the resulting polymers is discussed.

There is still a lot of research devoted to this compound(SMILES：CC1=CNC=C1)Synthetic Route of C5H7N, and with the development of science, more effects of this compound(616-43-3) can be discovered.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Shimoda, Mitsuya; Shiratsuchi, Hideki; Nakada, Yuji; Wu, Yin; Osajima, Yutaka published the article 《Identification and Sensory Characterization of Volatile Flavor Compounds in Sesame Seed Oil》. Keywords: volatile flavor compound sesame seed oil.They researched the compound: 3-Methyl-1H-pyrrole( cas:616-43-3 ).Recommanded Product: 616-43-3. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:616-43-3) here.

Volatile flavor compounds in sesame seed oil were investigated. Com. processed sesame seed oil was steam distilled under reduced pressure, and volatiles from the distillate were separated by an adsorptive column method. Among 171 individual peaks detected, 134 peaks were definitely or tentatively identified by anal. of mass spectra and modified Kovats indexes. To elucidate the compounds directly contributing to the characteristic flavor, the odor concentrate was fractionated by silica gel thin-layer chromatog. and preparative gas chromatog. As a result, 1-(5-methyl-2-furanyl)-1-propanone, 3-formylthiophene, 2-propyl-4-methylthiazole, 2-ethyl-4-methyl-1H-pyrrole, 2-ethyl-6-methylpyrazine, 2-ethyl-5-methylpyrazine, 4,5-dimethylisothiazole, 4,5-dimethylthiazole, 2,6-diethylpyrazine, 2-ethyl-2,5-dimethylpyrazine, 1-(2-pyridinyl)ethanone, and 1-(1-methyl-1H-pyrrol-2-yl)ethanone were considered to be principal contributors of sesame seed oil flavor.

There is still a lot of research devoted to this compound(SMILES：CC1=CNC=C1)Recommanded Product: 616-43-3, and with the development of science, more effects of this compound(616-43-3) can be discovered.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Synthesis of α,α’-unsubstituted pyrroles》. Authors are Plieninger, H.; Buhler, W..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Product Details of 616-43-3. Through the article, more information about this compound (cas:616-43-3) is conveyed.

α,α’-Unsubstituted pyrroles were made as intermediates for the synthesis of porphyrins and bile pigments. 3-Methylpyrrole (I) and 3,4-dimethylpyrrole were obtained in 40% yield (based on the starting acetal) from MeCOCH2CH(OMe)2 (II) and MeCOCHMeCH(OMe)2, resp. II cyanohydrin was condensed with dihydropyrene (III) to give MeC(CN)(OCH.CH2.CH2.CH2.CH2.O)CH2CH(OMe)2 which was reduced to the corresponding amine with LiAlH4. Acidification liberated the pyrrole but because of further transformation in the presence of acid, it could not be isolated. Acetylation of the amine, followed by treatment with MeC6H4SO3H in absolute Me2CO, split off III, liberated the aldehyde group and gave I acetyl derivative in one step. I was obtained by careful alk. hydrolysis.

There is still a lot of research devoted to this compound(SMILES：CC1=CNC=C1)Product Details of 616-43-3, and with the development of science, more effects of this compound(616-43-3) can be discovered.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

HPLC of Formula: 616-43-3. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Electrochemical properties and conductivity of poly(3-methylpyrrole/ClO4). Author is Gonzalez-Tejera, M. J.; Sanchez de la Blanca, E.; Carrillo, I.; Redondo, M. I.; Raso, M. A.; Tortajada, J.; Garcia, M. V..

Electrosynthesis of conducting poly(3-methylpyrrole) was carried out at fixed potentials of 0.5 and 0.6 V in a NaClO4 MeCN solution The electrochem. behavior of doped-polymer films was analyzed considering the influence of the neg. and pos. potential limits as well as the scan rate on the voltammograms recorded in MeCN. A mechanism for the redox processes is proposed. Polymer morphol. was examined by SEM, which reveals a cauliflower and compact texture depending on the potential of synthesis and deposition time. Kinetic of conductivity decay with aging time is dependent of exp(-t1/2) with a characteristic time of the degradation process around 20 days.

There is still a lot of research devoted to this compound(SMILES：CC1=CNC=C1)HPLC of Formula: 616-43-3, and with the development of science, more effects of this compound(616-43-3) can be discovered.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 616-43-3, is researched, Molecular C5H7N, about Structure of “”unknown”” soil nitrogen investigated by analytical pyrolysis, the main research direction is organic nitrogen compound detection soil pyrolysis; hydrolysis soil detection organic nitrogen pyrolysis.Product Details of 616-43-3.

Curie-point pyrolysis-gas chromatog./mass spectrometry (Py-GC/MS) and in-source pyrolysis-field ionization mass spectrometry (Py-FIMS) were applied for the 1st time to the structural characterization of organic N in hydrolyzates and hydrolysis residues resulting from the classical 6 M HCl hydrolysis of mineral soils. Two soils of widely different origin (i.e., a Gleysol Ah and a Podzol Bh) were investigated. Py-GC/MS was performed using a N-selective detector to detect and identify N-containing pyrolysis products in the hydrolyzate (e.g., pyrazole and/or imidazole, N,N-dimethylmethanamine, benzenacetonitrile, propane- and propenenitriles) and the hydrolysis residue (e.g., pyrroles, pyridines, indoles, N-derivatives of benzene, benzothiazole, and long-chain aliphatic nitriles). Temperature-resolved Py-FIMS allowed the thermal evolution of the N-containing compounds to be recorded during pyrolysis. These were characterized by a particularly high thermostability compared to their thermal release from whole soils. The combination of pyrolysis with mass spectrometric methods permitted analyses of the identities and thermal stabilities of complex N compounds in hydrolysis residues of whole soils, which cannot be done by wet-chem. methods. Pyrolysis-methylation GC/MS with NMe4OH enabled the identification of N,N-dimethylbenzenamine and so confirmed the identification of benzeneamine by Py-GC/MS in nonmethylated hydrolysis residues. N-derivatives of benzene and long-chain nitriles are characteristic of soils, terrestrial humic substances, and hydrolysis residues and seem to be specific, stable transformation products of soil N.

If you want to learn more about this compound(3-Methyl-1H-pyrrole)Product Details of 616-43-3, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The three-dimensional configuration of the ester heterocycle is basically the same as that of the carbocycle. Compound: 3-Methyl-1H-pyrrole(SMILESS: CC1=CNC=C1,cas:616-43-3) is researched.Electric Literature of C5H7N. The article 《Controlling the electro-mechanical performance of polypyrrole through 3- and 3,4-methyl substituted copolymers》 in relation to this compound, is published in RSC Advances. Let’s take a look at the latest research on this compound (cas:616-43-3).

Conducting polymers such as polypyrrole are biocompatible materials used in bioelectronic applications and microactuators for mechanobiol. and soft microrobotics. The materials are commonly electrochem. synthesized from an electrolyte solution comprising pyrrole monomers and a salt, which is incorporated as the counter ion. This electrosynthesis results in polypyrrole forming a three-dimensional network with extensive crosslinking in both the alpha and beta positions, which impacts the electro-mech. performance. In this study we adopt a ‘blocking strategy’ to restrict and control crosslinking and chain branching through beta substitution of the monomer to investigate the effect of crosslinking on the electroactive properties. Me groups where used as blocking groups to minimise the impact on the pyrrole ring system. Pyrrole, 3- and 3,4-Me substituted pyrrole monomers were electro-polymerised both as homo-polymers and as a series of co-polymer films. The electroactive performance of the films was characterised by measuring their electrochem. responses and their reversible and non-reversible film thickness changes. This showed that altering the degree of crosslinking through this blocking strategy had a large impact on the reversible and irreversible volume change. These results elaborate the importance of the polymer structure in the actuator performance, an aspect that has hitherto received little attention.

If you want to learn more about this compound(3-Methyl-1H-pyrrole)Computed Properties of C5H7N, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate