Category: 616-43-3

Electric Literature of C5H7N. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Different chemical composition of free light, occluded light and extractable SOM fractions in soils of Cerrado and tilled and untilled fields, Minas Gerais, Brazil: a pyrolysis-GC/MS study. Author is Buurman, P.; Roscoe, R..

To investigate both the effect of land-use systems on SOM characteristics and the effect of occlusion in aggregates on chem. composition of the occluded fraction, SOM fractions of soils under Cerrado, no-tillage and conventional tillage, were investigated. Free light, occluded light and extractable organic matter from native Cerrado and from tilled and unfilled fields under maize and bean rotation were separated and chem. analyzed by pyrolysis-GC/MS. Ploughing incorporated more fresh OM into the soil than natural biol. activity. Degradation of the occluded light fraction was not fully halted, but was different from that of SOM in the extractable fraction. Recalcitrant compounds had low abundances in the free light and extracted fractions, but were more abundant in the occluded light fraction, where the more accessible compounds were depleted by microbial decomposition Because of intense decomposition, the extracted fractions did not differentiate between land uses, but differences in the light fractions were significant. The results indicate that the decay of the occluded fraction is different from that of the free light fraction: non-ideal circumstances of decay caused a relative accumulation of potentially recalcitrant compounds When considering the rapid turnover of all components in the soil extracts, disruption of aggregates will probably cause rapid decay of the occluded fraction. The distribution of pyrolysis products that can be ascribed to charred wood (polyaromatics) indicates that this fraction is readily decayed if not occluded. Selective decomposition in the occluded fraction may cause a shift in δ13C that should not be misinterpreted.

Here is a brief introduction to this compound(616-43-3)Electric Literature of C5H7N, if you want to know about other compounds related to this compound(616-43-3), you can read my other articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Benincori, Tiziana; Brenna, Elisabetta; Sannicolo, Franco; Zotti, Gianni; Zecchin, Sandro; Schiavon, Gilberto; Gatti, Carlo; Frigerio, Giovanni published the article 《Steric and Electronic Effects in Methyl-Substituted 2,2′-Bipyrroles and Poly(2,2′-Bipyrrole)s: Part I. Synthesis and Characterization of Monomers and Polymers》. Keywords: electrochem polymerization bipyrrole; methyl substituent polypyrrole elec property.They researched the compound: 3-Methyl-1H-pyrrole( cas:616-43-3 ).Category: chiral-oxygen-ligands. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:616-43-3) here.

The effects of N- and C-Me substitution on the elec. and spectral properties of pyrrole, 2,2′-bipyrrole, and the corresponding polymers were investigated. A whole series of monomethyl and N- or Cβ-dimethyl-substituted 2,2′-bipyrroles was synthesized, and the electrochem. and spectral properties of all the compounds were investigated under identical testing conditions. The corresponding polymers were prepared by electrochem. anodic oxidation under comparable exptl. conditions and their spectroscopic and conductivity properties evaluated for comparison. The higher degree of efficiency in transmission of electronic effects associated with Me substitution at Cβ with respect to substitution at N was clearly demonstrated. The influence of the symmetry of the starting monomer (C2v or Cs) on the elec. properties of the resulting polymers is discussed.

Here is a brief introduction to this compound(616-43-3)Category: chiral-oxygen-ligands, if you want to know about other compounds related to this compound(616-43-3), you can read my other articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《New synthesis of serotonin》. Authors are Noland, Wayland E.; Hovden, Robert A..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Name: 3-Methyl-1H-pyrrole. Through the article, more information about this compound (cas:616-43-3) is conveyed.

Dropwise addition of a molar excess of nitroethylene to molten 5-benzyloxyindole at steam bath temperature 1.83 hrs. gave 3-(2-nitroethyl)-5-benzyloxyindole (I), m. 93.5-5.0° (CH2Cl2-ligroine), in 45% yield. Use of excess nitroethylene is desirable since unreacted 5-benzyloxyindole (36%) and 64% I form a eutectic mixture, m. 81-1.5°. Similar reactions of 5-benzyloxyindole with equimolar portions of β-nitrostyrene 6 hrs. and β-methyl-β-nitrostyrene for 22 hrs. gave 72 and 37% yields, resp., of 3-(1-phenyl-2-nitroethyl)-5-benzyloxyindole (II), platelets, m. 117-18° (alc.), and 3-(1-phenyl-2-nitropropyl)-5-benzyloxyindole (III), m. 152-2.5° (alc.). Hydrogenation at 2 atm. over PtO2 of I-III gave in high yields the corresponding tryptamines, isolated as the picrates. I gave 84% yield as reddish orange crystals, m. 231.5-2.0° (decomposition). III gave 94% yield, red crystals, m. 176-6.5° (alc.) and III gave 62% yield, red crystals, m. 213-15°. The tryptamine from I was characterized as the hydrochloride, m. 245-7° (decomposition). Hydrogenation of I at 2 atm. over 10% Pd-C resulted in concomitant reduction of the NO2 group and debenzylation to give 69% serotonin (IV) as the creatinine sulfate hydrate, m. 212-14°. This new synthesis of IV from 5-benzyloxyindole appeared to be higher in over-all yield than most reported methods. It was also simpler than previously described methods.

Here is a brief introduction to this compound(616-43-3)Name: 3-Methyl-1H-pyrrole, if you want to know about other compounds related to this compound(616-43-3), you can read my other articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Synthesis of α,α’-unsubstituted pyrroles》. Authors are Plieninger, H.; Buhler, W..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Quality Control of 3-Methyl-1H-pyrrole. Through the article, more information about this compound (cas:616-43-3) is conveyed.

α,α’-Unsubstituted pyrroles were made as intermediates for the synthesis of porphyrins and bile pigments. 3-Methylpyrrole (I) and 3,4-dimethylpyrrole were obtained in 40% yield (based on the starting acetal) from MeCOCH2CH(OMe)2 (II) and MeCOCHMeCH(OMe)2, resp. II cyanohydrin was condensed with dihydropyrene (III) to give MeC(CN)(OCH.CH2.CH2.CH2.CH2.O)CH2CH(OMe)2 which was reduced to the corresponding amine with LiAlH4. Acidification liberated the pyrrole but because of further transformation in the presence of acid, it could not be isolated. Acetylation of the amine, followed by treatment with MeC6H4SO3H in absolute Me2CO, split off III, liberated the aldehyde group and gave I acetyl derivative in one step. I was obtained by careful alk. hydrolysis.

Here is a brief introduction to this compound(616-43-3)Quality Control of 3-Methyl-1H-pyrrole, if you want to know about other compounds related to this compound(616-43-3), you can read my other articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 616-43-3, is researched, Molecular C5H7N, about 14N nuclear quadrupole coupling and methyl internal rotation in 3-methylpyrrole investigated by microwave spectroscopy, the main research direction is methylpyrrole nuclear quadrupole coupling.Application of 616-43-3.

The mol. structure of 3-methylpyrrole in the gas phase has been determined using a combination of high-resolution spectroscopy and quantum chem. calculations The rotational spectrum was recorded using a mol. jet Fourier transform microwave spectrometer covering the frequency range from 2.0 to 26.5 GHz. The exptl. data were analyzed using the programs XIAM and BELGI-Cs-hyperfine. Because the internal rotor axis accidentally lies along the principal a-axis of inertia, the rho axis system and the principal axis system coincide, enabling a direct comparison of the fits. With the program XIAM, the rotational constants A = 8631.1629(12), B = 3342.19750(43), and C = 2445.73846(42) MHz were obtained. Torsional splittings due to internal rotation of the Me group were observed, leading to the determination of the V3 potential of 245.92445(31) cm-1. Hyperfine splittings arising from the nuclear quadrupole coupling of the 14N nucleus could be resolved, and the quadrupole coupling constants χaa = 1.4159(49) and χbb – χcc = 4.1622(86) MHz were found.

Here is a brief introduction to this compound(616-43-3)Application of 616-43-3, if you want to know about other compounds related to this compound(616-43-3), you can read my other articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Duvall, J. J.; Jensen, H. B. published the article 《The radiation chemistry of some simple pyrroles》. Keywords: radiation chem pyrrole.They researched the compound: 3-Methyl-1H-pyrrole( cas:616-43-3 ).Related Products of 616-43-3. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:616-43-3) here.

Pyrrole, monomethylpyrroles, and 2,5-dimethylpyrrole were γ-irradiated. Gaseous, liquid and residual products were determined The products indicate that several types of reactions occur including ring rupture, cleavage of bonds external to the pyrrole ring, ring substitution, and intramol. rearrangement. A brief comparison is made among radiolysis, photolysis, mass spectral ionization, and pyrolysis reactions of pyrrole compounds

Here is a brief introduction to this compound(616-43-3)Related Products of 616-43-3, if you want to know about other compounds related to this compound(616-43-3), you can read my other articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Hydrogenation of pyridine and α-picoline over Raney nickel-aluminum catalyst, published in 1959, which mentions a compound: 616-43-3, Name is 3-Methyl-1H-pyrrole, Molecular C5H7N, Quality Control of 3-Methyl-1H-pyrrole.

Hydrogenation of pyridine at 200° in a flow system over Raney Ni-Al catalyst gave piperidine, its azeotropic mixture with H2O (b739 90-2°, n20D 1.4320, d20 0.9277), and 2-methylpyridine. At low feed rate there was also formed some 3-methylpyrrole, 10% 2-propylpiperidine, and possibly some N-cyclopentylpiperidine. Hydrogenation of 2-picoline gave 2-pipecoline and some 3-methylpyrrole.

If you want to learn more about this compound(3-Methyl-1H-pyrrole)Quality Control of 3-Methyl-1H-pyrrole, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Steric and Electronic Effects in Methyl-Substituted 2,2′-Bipyrroles and Poly(2,2′-Bipyrrole)s: Part I. Synthesis and Characterization of Monomers and Polymers, published in 2000-05-31, which mentions a compound: 616-43-3, mainly applied to electrochem polymerization bipyrrole; methyl substituent polypyrrole elec property, Related Products of 616-43-3.

The effects of N- and C-Me substitution on the elec. and spectral properties of pyrrole, 2,2′-bipyrrole, and the corresponding polymers were investigated. A whole series of monomethyl and N- or Cβ-dimethyl-substituted 2,2′-bipyrroles was synthesized, and the electrochem. and spectral properties of all the compounds were investigated under identical testing conditions. The corresponding polymers were prepared by electrochem. anodic oxidation under comparable exptl. conditions and their spectroscopic and conductivity properties evaluated for comparison. The higher degree of efficiency in transmission of electronic effects associated with Me substitution at Cβ with respect to substitution at N was clearly demonstrated. The influence of the symmetry of the starting monomer (C2v or Cs) on the elec. properties of the resulting polymers is discussed.

If you want to learn more about this compound(3-Methyl-1H-pyrrole)Related Products of 616-43-3, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Electrochemical properties and conductivity of poly(3-methylpyrrole/ClO4), published in 2005-06-14, which mentions a compound: 616-43-3, Name is 3-Methyl-1H-pyrrole, Molecular C5H7N, SDS of cas: 616-43-3.

Electrosynthesis of conducting poly(3-methylpyrrole) was carried out at fixed potentials of 0.5 and 0.6 V in a NaClO4 MeCN solution The electrochem. behavior of doped-polymer films was analyzed considering the influence of the neg. and pos. potential limits as well as the scan rate on the voltammograms recorded in MeCN. A mechanism for the redox processes is proposed. Polymer morphol. was examined by SEM, which reveals a cauliflower and compact texture depending on the potential of synthesis and deposition time. Kinetic of conductivity decay with aging time is dependent of exp(-t1/2) with a characteristic time of the degradation process around 20 days.

If you want to learn more about this compound(3-Methyl-1H-pyrrole)SDS of cas: 616-43-3, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Identification of two chromogens in the Elson-Morgan determination of hexosamines. A new synthesis of 3-methylpyrrole. Structure of the “”pyrrolenephthalides””》. Authors are Cornforth, J. W.; Firth, M. E..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Synthetic Route of C5H7N. Through the article, more information about this compound (cas:616-43-3) is conveyed.

The substance producing most of the color with Ehrlich’s reagent in the Elson-Morgan assay of hexosamines is shown to be 2-methylpyrrole (I); 3-acetyl-2-methylpyrrole (II) is also formed. A synthesis of 3-methylpyrrole (III) in 4 steps from CH2:CMeCH2Cl (IV) is described. Infrared spectra indicate that the condensation products of pyrroles with ο-C6H4(CO)2O (V) are benzo[f]pyrrocoline-5,10-diones; several of these are described. D-Glucosamine-HCl (VI) (21.6 g.) in 800 cc. H2O was added to an aqueous solution (2200 ml.) containing 106 g. Na2CO3, 19.6 g. Ac2CH2, and 200 ml. N HCl, the mixture at pH 9.75 in 2 portions heated on steam baths under reflux condensers, heating continued 20 min., the solutions cooled below 30°, combined, distilled at 20 mm., and the receiver cooled, until the distillate gave no color with Ehrlich’s reagent. The distillate (450 ml.) saturated with NaCl, extracted with Et2O, shaken once with 2N NaOH and H2O, the combined aqueous and alk. solutions reëxtd. with Et2O, the extracts evaporated at -10°/30-40 mm., the residue distilled at room temperature and 1 mm. gave 650 mg. I, b766 138-46°. I remained colorless in N at -5° but darkened in air. The infrared spectrum was identical with that of authentic I. The residual liquors after collection of the aqueous distillate combined, heated 45 min., then distilled, the pyrrole precipitated as the Hg complex, the solid suspended in N Na2CO3, and decomposed with H2S gave 40 mg. I. The aqueous reaction mixture from I extracted continuously 24 hrs. with Et2O, and the product distilled at 0.6-0.7 mm. gave a product which sublimed above 100°/0.05 mm., the sublimate suspended in 1:1 Et2O-ligroine, and the solid collected gave 130 mg. II, m. 94-5° (ligroine), ν 1620 cm.-1 in KCl, and 1660 cm.-1 in CCl4. Aminoacetal (3 g.) with 1 ml. H2O added dropwise in the cold to 18 g. HCl, after 5 hrs. at room temperature the solution neutralized to methyl orange, 1.39 g. Ac2CH2 added at once, the pH adjusted to 10, after 24 hrs. at 5° the mixture saturated with salt and extracted with Et2O, the Et2O concentrated, and the residue sublimed below 100°/0.5 mm. and crystallized gave II. II would not form a semicarbazone or 2,4-dinitrophenylhydrazone. Pyrrole-2-aldehyde (5 g.) refluxed 15 min. with 10 g. KOH, 7.5 ml. 90% N2H4.H2O, and 100 ml. O(CH2CH2OH)2, the mixture heated so that I slowly distilled (with some H2O, N2H4, and glycol) (after 4-5 hrs. the condensate was weakly Ehrlich pos.), a little H2O added to the distillate, the lower layer saturated with NaCl, and extracted with Et2O gave 3.65 g. I. 2-Acetylpyrrole (1.5 g.) similarly gave 0.81 g. 2-ethylpyrrole, b20 65°. VI (250 μg.) in 5 ml. H2O heated 25 min. in a stoppered flask immersed in a bath at 95-100° with 5 ml. of a solution of 1 ml. Ac2CH2 in 50 ml. 0.5N Na2CO3, two 1-ml. samples (O1,O2) were withdrawn, the remainder concentrated at 20 mm., the thawed distillate diluted with 8 ml. H2O and a 1-ml. portion (D) taken. The residue also diluted to 8 ml. with H2O and two 1-ml. samples (R1,R2) drawn. A solution (P) of 2.45 μg. I in H2O was prepared by suitable dilutions Samples O1, D, R1, and P were treated with 5 ml. alc., followed after mixing by 0.5 ml. Ehrlich reagent. Samples O2 and R2 received 0.5 ml. of 1:1 alc.-acid. The solutions were kept 1-2 hrs. at room temperature Solutions O2 and R2 showed no significant difference from B when examined at 530 and 540 mμ. Solutions O1, D, R1 and P were measured with O2 as control. The following results were obtained (λ in mμ, optical density of O1, D, R1, and P given): 500, 0.089, 0.051, 0.038, 0.144; 510, 0.120, 0.070, 0.050, 0.203; 520, 0.154, 0.098, 0.060, 0.269; 530, 0.179, 0.121, 0.056, 0.323; 535, 0.183, 0.132, 0.050, -; 540, 0.186, 0.139, 0.040, 0.375; 544, -, 0.141, -, 0.386; 545, 0.185, 0.141, 0.030, 0.386; 550, 0.176, 0.138, 0.025, 0.377; 560, 0.125, 0.100, 0.020, 0.287. Two solutions of II (200 μg. and 10 μg.) in H2O were treated with alc. and Ehrlich reagent. After 1 hr. the stronger solution was pale pink and after 1 week it had become deep purple and the weaker one was pale pink. HC(OEt)3 (90 ml.) and 35 g. Mg heated at 60°, 2 ml. IV added, followed by a little MeI, cooling being required to keep the temperature below 70°, 49.5 ml. more IV added at such a rate as to maintain a temperature of 60°, next day the flask cooled, saturated NH4Cl added dropwise until the mixture became solid, the cake collected, and the filtrate evaporated gave 45 g. 3-methyl-3-butenal diethyl acetal (VII), b18-19 58-60°, b745 162°, n21D 1.4155. VII (13.2 g.) in 20 ml. Et2O treated gradually with 85 ml. ethereal M perphthalic acid, allowed to warm, and kept below 30° by occasional cooling, the next day the phthalic acid removed, and the filtrate extracted with aqueous NaHCO3 gave 10.9 g. 3,4-epoxy-3-methylbutanal diethyl acetal (VIII), b17 83-4°. VIII (3 g.) and 20 ml. MeOHNH3 kept 24 hrs. at 37° and distilled gave 1.95 g. 4-amino-3-hydroxy-3-methylbutanal diethyl acetal (IX), b17 130°, purple color with Ehrlich reagent. Aqueous NH3, either at 100° for 3.5 hrs., or at room temperature 48 hrs. also opened the epoxide ring; the best yield of IX was 65%. IX (1.5 g.) distilled with a solution of 4.5 g. citric acid in 400 ml. H2O until the Ehrlich test became weak and III was isolated from the distillate as for I, giving 200 mg. III, b. 142-3°, darkened rapidly in the air. III (38%) was obtained by dissolving IX in H2O and 3 g. citric acid and distilling the whole in stream until 400 ml. distillate had collected; a Hg complex of III was formed when IV was kept 2 days at 40° with 450 mg. NH4OAc, 2.5 ml. 0.5N AcOH, and 900 mg. HgCl2 with occasional shaking. The following general procedure for preparing benzopyrrocolinediones was developed. The pyrrole (x g.) and 10x g. V mixed with 15x g. AcOH in a tube and when sealed heated 2 hrs. at 180-90°, the product refluxed with H2O, the black residue extracted with hot alc., the alc. filtrate taken to dryness, the residue treated with C6H6, filtered, and the filtrate after concentration chromatographed on Al2O3 gave the crystalline benzopyrrocolinedione. I (600 mg.) gave 98 mg. 3-methylbenzo[f]pyrrocoline-5,10-dione, needles, m. 173-4° (ligroine), ν 1708 and 1655 cm.-1. A mixture of 1- and 2-methylbenzo[f]pyrrocoline-5,10-diones (57 mg.) was obtained from 200 mg. III. Recrystallization from alc. gave 18 mg. of one isomer, m. 223°. The mother liquors and washings from the 1st recrystallization evaporated and the residue crystallized gave 13 mg. of the other isomer, m. 169-70°. Both isomerides showed ν 1708 and 1655 cm.-1 in KCl. 2-Ethylpyrrole (364 mg.) gave 43 mg. 1-ethylbenzo[f]pyrrocoline-5,10-dione, m. 114°, after sublimation in vacuo and crystallization from MeOH. Condensation of 2,4-dimethylpyrrylmagnesium bromide [from 6.4 g. 2,4-dimethylpyrrole (IXa)] and 5 g. V in Et2O gave a solid by filtration after decomposition of the mixture with ice and CO2; the aqueous filtrate extracted with Et2O and acidified and the precipitates combined and crystallized gave 7.2 g. 2-(ο-carboxybenzoyl)-3,5-dimethylpyrrole (X), m. 195-6.5° (decomposition) (MeOH-H2O). X on warming with Ehrlich reagent developed a cherry red color. X (100 mg.) refluxed 1.5 hrs. with 2 ml. H2O and 5 drops NH4OH gave 27.5 mg. 1,3-dimethylbenzo[f]pyrrocoline-5,10-dione (XI), m. 181-3° (alc.), ν 1705, 1650 cm.-1 KCl, λ 378, 318, 267, 237 mμ, log ε 3.67, 3.71, 4.28, and 4.42, resp. XI was also obtained on heating IXa and V by the standard procedure. XI (52.5 mg.) heated 1 hr. with 2 ml. 2N NaOH gave X.

If you want to learn more about this compound(3-Methyl-1H-pyrrole)Synthetic Route of C5H7N, you may wish to communicate with the author of the article,or consult the relevant literature related to this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate