Category: chiral-oxygen-ligands

Application of 3685-23-2. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: cis-4-Aminocyclohexane carboxylic acid, is researched, Molecular C7H13NO2, CAS is 3685-23-2, about Renin inhibitory pentols showing improved enteral bioavailability. Author is Kleemann, Heinz Werner; Heitsch, Holger; Henning, Rainer; Kramer, Werner; Kocher, Walter; Lerch, Ulrich; Linz, Wolfgang; Nickel, Wolf Ulrich; Ruppert, Dieter.

Aminopentols derived from L-(+)-glucose and D-(+)-mannose were prepared and tested for renin-inhibiting activity as well as bioavailability. Incorporation of a C-terminal pentahydroxy functionality led to potent, low mol. weight hydrophilic renin inhibitors lacking the p1′ side chain. I was transported across rabbit intestinal brush border membrane vesicles and yielded a hypotensive effect in sodium-depleted rhesus monkeys which lasted for 90 min when dosed at 2 mg/kg, intraduodenally.

As far as I know, this compound(3685-23-2)Application of 3685-23-2 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

COA of Formula: C5H7N. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Electrochemical synthesis of N-methyl and 3-methyl pyrrole perchlorate doped copolymer films. Author is Gonzalez-Tejera, M. J.; Garcia, M. V.; Sanchez de la Blanca, E.; Redondo, M. I.; Raso, M. A.; Carrillo, I..

Electrochem. copolymerization of 3-methylpyrrole and N-methylpyrrole perchlorate doped was carried out at 2 overpotentials and at different electrodeposition times in MeCN medium. A mixture of instantaneous and progressive nucleation mechanisms was established from the c.d.-time transients. Doping/dedoping reversibility is deduced from the electrochem. study of copolymer films by cyclic voltammetry. FTIR spectrum anal. shows that electropolymerization time has a great influence on the random monomers proportion in the copolymer obtained. Although the copolymer conductivity is in the range of that measured for poly(3-methylpyrrole) and poly(N-methylpyrrole) obtained in similar conditions, it remains conductive for a much longer time than the homopolymers.

As far as I know, this compound(616-43-3)COA of Formula: C5H7N can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Activation of the amide group by acylation. V. Inclusion of amino acid residues into linear and cyclic peptides》. Authors are Antonov, V. K.; Agadzhanyan, Ts. E.; Telesnina, T. R.; Shemyakin, M. M..The article about the compound:cis-4-Aminocyclohexane carboxylic acidcas:3685-23-2,SMILESS:N[C@H]1CC[C@H](CC1)C(O)=O).Computed Properties of C7H13NO2. Through the article, more information about this compound (cas:3685-23-2) is conveyed.

cf. CA 63, 16255f. Dipeptides and lactams acylated at the amide-N by amino acid residues were shown to isomerize to give corresponding linear or cyclic peptides through intermediate azocyclols, which can also undergo dehydration to form acylamidines. The transannular interaction of amide groups in 9-10-membered cyclopeptides can also result in similar acylamidines; such a process takes place during mass spectrometry of cyclopeptides. N-Phthaloylglycylglycine Et ester and azidoacetyl chloride refluxed in MePh 10 hrs. gave after filtration and evaporation 46% N-azidoacetyl-N’-phthaloylglycylglycine Et ester, m. 115-16°. Similarly were prepared 36% N-azidoacetyl-N’-phthaloylglycyl-L-leucine Et ester, m. 118-19°. The former treated with 28% HBr in AcOH overnight in the cold, diluted with Et2O, and the resulting precipitate (I) treated with Et3N in tetrahydrofuran gave 70% N-phthaloylglycylglycylglycine Et ester, m. 228-9°. Similarly was prepared N-phthaloylglycylglycyl-L-leucine Et ester, m. 155-6°. I and H2O in 5 min. gave 73% 2-phthaloylaminomethyl-3-carbethoxymethyl-Δ1-imidazolin-4-one, m. 153-4°. Similarly was obtained 63% 2-phthaloylaminomethyl-3-(1-carbethoxy-3-methylbutyl)-Δ1-imidazolin-4-one, m. 117-18°. Carbobenzoxy-β-alanyl chloride and butyrolactam in Et2O were treated at 5° with Et3N to yield in 1 day at 20° 58% N-carbobenzoxy-β-alanylbutyrolactam (II), m. 94-5°. Similar reaction with valerolactam gave N-carbobenzoxy-β-alanylvalerolactam, m. 60-1°. Similarly was prepared 50% N-carbobenzoxy-β-alanylcaprolactam, m. 60-1°. II hydrogenated over Pd in Et2O gave 38% cyclo(β-alanyl-γ-aminobutyryl) (III), m. 173°, also formed from II by treatment with 27% HBr in AcOH 45 min.; HBr salt m. 119-20°. Similarly was obtained cyclo(β-alanyl-δ-aminovaleryl) (IV), m. 187°, and 61% cyclo(β-alanyl-ε-aminocaproyl) (V), m. 259°. III heated in xylene 1 hr. under azeotropic conditions of H2O removal gave 68% 1,2-trimethylene-6-oxo-1,4,5,6-tetrahydropyrimidine (IIIa), b12 152-4°. IV similarly gave 45% 1,2-tetramethylene-6-oxo-1,4,5,6-tetrahydropyrimidine (IVa), b12 160° (no reaction took place in ο-Cl2C6H4 in 4 hrs. with V). III heated with H2O 5 min. gave 80% N-[1-aza-1-cyclopenten-2-yl]-3-aminopropionic acid (VI), decomposed 186-7°. H2NCH2CH2CO2H in MeOH was treated with O-methylbutyrolactam and gave after heating 10 min. 97% VI. Similarly O-methylvalerolactam gave 95% N-[1-aza-1-cyclohexen-2-yl]-3-aminopropionic acid, m. 186°, which heated with removal of H2O in Cl2C6H4 gave 91% IVa. Similarly O-methylcaprolactam gave 93% N-[1-aza-1-cyclohepten-2-yl]-3-aminopropionic acid, m. 200-1°, which heated in Cl2C6H4 gave 12% cyclo(β-alanyl-ε-aminocapropyl) and 80% 1,2-pentamethylene-6-oxo-1,4,5,6-tetrahydropyrimidine, b10 185-90°, m. 35°. Heating VI in xylene with removal of H2O gave IIIa. The latter kept with H2O 2 days gave VI, while H2O-Ag2O gave 32% VI and 54% cyclo(β-alanyl-γ-aminobutyryl). The above analogs of VI reacted similarly.

As far as I know, this compound(3685-23-2)Computed Properties of C7H13NO2 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Application In Synthesis of cis-4-Aminocyclohexane carboxylic acid. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: cis-4-Aminocyclohexane carboxylic acid, is researched, Molecular C7H13NO2, CAS is 3685-23-2, about Highly selective preparation of trans-4-aminocyclohexanecarboxylic acid from cis-isomer over Raney nickel catalyst. Author is Gobolos, Sandor; Banka, Zoltan; Toth, Zoltan; Szammer, Janos; Margitfalvi, Jozsef L..

4-Amino-benzoic acid was hydrogenated to 4-aminocyclohexanecarboxylic acid over alumina supported 5 weight% Ru and Rh catalysts. Complete ring saturation was achieved in 2 weight % NaOH-H2O at 80-100 °C, 10 MPa H2, and 5 h however, the ratio of trans/cis stereoisomers of the product was only between 1/3-1/1. The raw reaction mixture was further processed in the presence of a com. Raney nickel catalyst at 130°C, 100 bar H2 for 5 h. In this alkali-mediated isomerization the trans/cis isomer ratio was 7/3. The cis isomer was isolated by fractional crystallization, and then reacted on Raney nickel catalysts in 2%NaOH-H2O at 120-140°C, 1 MPa H2 for 5 h to obtain the trans isomer with a yield of ca. 70%. The two-step synthesis resulted in trans-4-aminocyclohexanecarboxylic acid with a yield above 90%. Catalytic tests were performed in a high-throughput reactor system equipped with 16 mini autoclaves.

As far as I know, this compound(3685-23-2)Application In Synthesis of cis-4-Aminocyclohexane carboxylic acid can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Formula: C7H13NO2. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: cis-4-Aminocyclohexane carboxylic acid, is researched, Molecular C7H13NO2, CAS is 3685-23-2, about Synthesis and properties of 2-azabicyclo[2:2:2]octan-3-one and 6-azabicyclo[3:2:1]octan-7-one. Author is Palaima, A.; Staniulyte, Z.; Klimavicius, A..

Optimal reaction conditions for the synthesis of lactams of cis-3- and -4-ACH acids and their derivatives were determined 1H NMR spectral data confirmed different configuration of lactams of cis-3- and cis-4-derivatives Possibility to apply lactams for the separation of cis- and trans-isomers was investigated.

In some applications, this compound(3685-23-2)Formula: C7H13NO2 is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Buurman, P.; Nierop, K. G. J.; Kaal, J.; Senesi, N. researched the compound: 3-Methyl-1H-pyrrole( cas:616-43-3 ).Name: 3-Methyl-1H-pyrrole.They published the article 《Analytical pyrolysis and thermally assisted hydrolysis and methylation of EUROSOIL humic acid samples – A key to their source》 about this compound( cas:616-43-3 ) in Geoderma. Keywords: humic acid Eurosoil aliphaticity lignin. We’ll tell you more about this compound (cas:616-43-3).

Humic acids have been widely investigated by spectroscopic methods, especially NMR and FTIR, and they are known to show significant differences according to their origin. Low resolution methods such as NMR and FTIR, however cannot easily distinguish different input sources or establish relations between SOM chem. and vegetation or land use in general. High resolution methods, such as anal. pyrolysis and pyrolysis combined with methylation do offer such possibilities. Therefore, HAs from five reference soils called the Eurosoils, including a Vertic Cambisol (E1, Italy), a Rendzina (E2, Greece), a Dystic Cambisol (E3, Great Britain), an Orthic Luvisol (E4, France) and an Orthic Podzol (E5, Germany), that were previously characterized a.o. by NMR, FTIR and ESR, were also analyzed by pyrolysis-gas chromatog./mass spectrometry (Py-GC/MS) and thermally assisted hydrolysis and methylation (THM) and subsequent anal. by GC/MS. The Orthic Podzol sample showed the largest aliphaticity, and the strongest degradation of aliphatics and lignin. The Dystric Cambisol featured the least decomposed HA, which was reflected by a large content of long-chain alkanes, and little lignin degradation Both the Dystric Cambisol and the Orthic Luvisol HAs contained a significant amount of microbial organic matter. Polyaromatics, which indicate the presence of charred material, were most abundant in the Vertic Cambisol and the Podzol HAs and lowest in the Dystric Cambisol and the Rendzina HAs. THM was able to distinguish between the various vegetations/land uses. Although quantifications by NMR and py-GC/MS are essentially different, the general results largely coincided. NMR appears to underestimate aromaticity and overestimate aliphaticity, but a mol. mixing model yielded reasonable correlations between NMR and pyrolysis data. Classification by degradation state’ based on py-GC/MS largely coincided with acidity determined by titration, but FTIR data did not coincide. Py-GC/MS, with its much larger resolution, is a better tool to distinguish effects of vegetation, microbial input, and degradation HA’s produce the same variety of compounds upon pyrolysis as total SOM extracts and are therefore chem. not more simple than SOM. HA chem., however can be understood in the light of land use history and SOM dynamics.

In addition to the literature in the link below, there is a lot of literature about this compound(3-Methyl-1H-pyrrole)Name: 3-Methyl-1H-pyrrole, illustrating the importance and wide applicability of this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Safety of 3-Methyl-1H-pyrrole. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Computational Design and Electropolymerization of Molecularly Imprinted Poly(p-Aminobenzoic-Acid-Co-Dapsone) Using Multivariate Optimization for Tetradifon Residue Analysis. Author is Ganjeizadeh Rohani, Fatemeh; Mohadesi, Alireza; Ansari, Mehdi.

In this study, tetradifon as a non-electroactive pesticide was measured by a new gold electrode modified with electropolymerized molecularly imprinted poly(para aminobenzoic acid-co-4,4-diaminodiphenyl sulfone) (P-pABA-co-DDS). The best available monomer was selected based on computational design and then the polymer was developed in optimized condition. Screening of various factors was performed by Plackett-Burman design (PBD) and central composite design (CCD) was utilized to select optimized condition. Under the optimized condition, calibration curve of tetradifon on MIP/gold electrode was constructed with a linear range of 0.05- 2.50μM. The limit of detection (LOD) and limit of quantification (LOQ) was found to be 0.014 and 0.047μM, resp. The developed method showed good stability, repeatability, and reproducibility, sensitivity and selectivity for tetradifon. The developed method was applied to determine tetradifon in real water samples.

In addition to the literature in the link below, there is a lot of literature about this compound(3-Methyl-1H-pyrrole)Safety of 3-Methyl-1H-pyrrole, illustrating the importance and wide applicability of this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: 3-Methyl-1H-pyrrole( cas:616-43-3 ) is researched.Synthetic Route of C5H7N.Wei, Binqing Q.; Baase, Walter A.; Weaver, Larry H.; Matthews, Brian W.; Shoichet, Brian K. published the article 《A Model Binding Site for Testing Scoring Functions in Molecular Docking》 about this compound( cas:616-43-3 ) in Journal of Molecular Biology. Keywords: active site lysozyme binding ligand electrostatic force mol modeling. Let’s learn more about this compound (cas:616-43-3).

Prediction of interaction energies between ligands and their receptors remains a major challenge for structure-based inhibitor discovery. Much effort has been devoted to developing scoring schemes that can successfully rank the affinities of a diverse set of possible ligands to a binding site for which the structure is known. To test these scoring functions, well-characterized exptl. systems can be very useful. Here, mutation-created binding sites in T4 lysozyme were used to investigate how the quality of at. charges and solvation energies affects mol. docking. At. charges and solvation energies were calculated for 172,118 mols. in the Available Chems. Directory using a semi-empirical quantum mech. approach by the program AMSOL. The database was first screened against the apolar cavity site created by the mutation Leu99Ala (L99A). Compared to the electronegativity-based charges that are widely used, the new charges and desolvation energies improved ranking of known apolar ligands, and better distinguished them from more polar isosteres that are not observed to bind. To investigate whether the new charges had predictive value, the non-polar residue Met102, which forms part of the binding site, was changed to the polar residue glutamine. The structure of the resulting Leu99 Ala and Met102 Gln double mutant of T4 lysozyme (L99A/M102Q) was determined and the docking calculation was repeated for the new site. Seven representative polar mols. that preferentially docked to the polar vs. the apolar binding site were tested exptl. All seven bind to the polar cavity (L99A/M102Q) but do not detectably bind to the apolar cavity (L99A). Five ligand-bound structures of L99A/M102Q were determined by X-ray crystallog. Docking predictions corresponded to the crystallog. results to within 0.4 A RMSD. Improved treatment of partial at. charges and desolvation energies in database docking appears feasible and leads to better distinction of true ligands. Simple model binding sites, such as L99A and its more polar variants, may find broad use in the development and testing of docking algorithms.

In addition to the literature in the link below, there is a lot of literature about this compound(3-Methyl-1H-pyrrole)Synthetic Route of C5H7N, illustrating the importance and wide applicability of this compound(616-43-3).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Category: chiral-oxygen-ligands. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: cis-4-Aminocyclohexane carboxylic acid, is researched, Molecular C7H13NO2, CAS is 3685-23-2, about Liquid-phase hydrogenation of some aromatic acids on ruthenium catalysts. Author is Ponomarev, A. A.; Ryzhenko, L. M.; Smirnova, N. S..

Using 10% RuO2 or Ru on activated the hydrogenation was carried out at 100-20° in H2O or in aqueous alk. solutions The following compounds gave 60-99% yields of the following products (starting compound and product given): p-H2NC6H4CO2H, p-aminohexa-hydrobenzoic acid (I); p-O2NC6H4CO2H, I; m-H2NC6H4CO2H, m-aminohexahydrobenzoic acid (II), m-O2NC6H4CO2H, II; m-NaOC6H4CO2Na, m-hydroxyhexahydrobenzoic acid; disodium 2-methylterephthalate, 2-methylhexahydroterephthalic acid.

In addition to the literature in the link below, there is a lot of literature about this compound(cis-4-Aminocyclohexane carboxylic acid)Category: chiral-oxygen-ligands, illustrating the importance and wide applicability of this compound(3685-23-2).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Synthesis of mono-, di-, tri- and tetracarboxy azaphthalocyanines as potential dark quenchers, published in 2011, which mentions a compound: 56413-95-7, Name is 5,6-Dichloropyrazine-2,3-dicarbonitrile, Molecular C6Cl2N4, Formula: C6Cl2N4.

Mono-, di-, tri- and tetracarboxy-substituted metal-free azaphthalocyanines (AzaPc) were synthesized from 5,6-bis(diethylamino)pyrazine-2,3-dicarbonitrile and 6-(5,6-dicyano-3-(diethylamino)pyrazin-2-ylamino)hexanoic acid using a statistical condensation approach. AzaPc bearing eight diethylamino peripheral substituents was also isolated from the mixture Anal. of the distribution of congeners in the statistical mixture using optimized HPLC method (Phenomenex Synergy RP Fusion column, acetonitrile/tetrahydrofuran/water (pH 5.5) 50:20:30) was performed. The anal. showed optimal ratios of starting materials to be 3:1 for AAAB, 1:3 for ABBB and 1:1 for AABB/ABAB types of the congeners. The distribution of the congeners corresponded well with calculated values indicating similar reactivity of both starting materials and no steric constraint between adjacent isoindole units in the AzaPc ring. All studied AzaPc showed no fluorescence, extremely low singlet oxygen quantum yields (Φ Δ < 0.005) in monomeric form and strong absorption in a wide range from 300 nm to almost 700 nm. Such properties are highly promising for future study of these compounds as dark quenchers of fluorescence in DNA hybridization probes. In addition to the literature in the link below, there is a lot of literature about this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile)Formula: C6Cl2N4, illustrating the importance and wide applicability of this compound(56413-95-7).

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate