Category: chiral-oxygen-ligands

Application In Synthesis of 3-Methyl-1H-pyrrole. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Transformation of Nitrogen and Evolution of N-Containing Species during Algae Pyrolysis.

Transformation and evolution mechanisms of nitrogen during algae pyrolysis were investigated in depth with exploration of N-containing products under variant temperature Results indicated nitrogen in algae is mainly in the form of protein-N (∼90%) with some inorganic-N. At 400-600 °C, protein-N in algae cracked first with algae pyrolysis and formed pyridinic-N, pyrrolic-N, and quaternary-N in char. The content of protein-N decreased significantly, while that of pyrrolic-N and quaternary-N increased gradually with temperature increasing. Pyridinic-N and pyrrolic-N formation was due to deamination or dehydrogenation of amino acids; subsequently, some pyridinic-N converted to quaternary-N. Increasing temperature decreased amides content greatly while increased that of nitriles and N-heterocyclic compounds (pyridines, pyrroles, and indoles) in bio-oil. Amides were formed through NH3 reacting with fatty acids, that underwent dehydration to form nitriles. Besides, NH3 and HCN yields increased gradually. NH3 resulted from ammonia-N, labile amino acids and amides decomposition, while HCN came from nitrile decomposition At 700-800 °C, evolution trend of N-containing products was similar to that at 400-600 °C. While N-heterocyclic compounds in bio-oil mainly came from pyrifinic-N, pyrrolic-N, and quaternary-N decomposition Moreover, cracking of pyridinic-N and pyrrolic-N produced HCN and NH3. A mechanism of nitrogen transformation during algae pyrolysis is proposed based on amino acids decomposition

Here is just a brief introduction to this compound(616-43-3)Application In Synthesis of 3-Methyl-1H-pyrrole, more information about the compound(3-Methyl-1H-pyrrole) is in the article, you can click the link below.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The chemical properties of alicyclic heterocycles are similar to those of the corresponding chain compounds. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Improved preparation of 3-methylpyrrole. Laboratory note, the main research direction is PYRROLE METHYL.Application In Synthesis of 3-Methyl-1H-pyrrole.

An improved synthesis of 3-methylpyrrole (I) and the N.M.R. spectra of the intermediates and product are given. Thus, 20 g. 3-carbethoxy-4-methyl-2-pyrrolecarboxylic acid is refluxed 1 hr. with 300 ml. 40% KOH, cooled, acidified with dilute HCl, filtered, washed with water, and dried to give 70% 4-methylpyrrole-2,3-dicarboxylic acid (II), m. 225°. II (12 g.) is added to 1 g. powd. Cu and heated under 50 mm. to dist. 87% I.

Here is just a brief introduction to this compound(616-43-3)Application In Synthesis of 3-Methyl-1H-pyrrole, more information about the compound(3-Methyl-1H-pyrrole) is in the article, you can click the link below.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Thermal reactions of organic nitrogen compound. I. I-Methylpyrrole, published in 1958, which mentions a compound: 616-43-3, mainly applied to , Name: 3-Methyl-1H-pyrrole.

A flow method was used at 475-700°. At 475-575° the reaction was a homogeneous 1st-order isomerization, 1-methylpyrrole → 2-methylpyrrole → 3-methylpyrrole. The Arrhenius equation for this reaction, based on the disappearance of 1-methylpyrrole, is k = 2.39 × 1012e(-54,800/RT). Above 575° there was decomposition to give a complex mixture of reaction products.

Here is just a brief introduction to this compound(616-43-3)Name: 3-Methyl-1H-pyrrole, more information about the compound(3-Methyl-1H-pyrrole) is in the article, you can click the link below.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Synthesis of pyrido[1′,2′:1,2]imidazo[4,5-b]pyrazines from 2-amino-3-chloro-5,6-dicyanopyrazine with substituted pyridines, published in 1986-12-31, which mentions a compound: 56413-95-7, Name is 5,6-Dichloropyrazine-2,3-dicarbonitrile, Molecular C6Cl2N4, Reference of 5,6-Dichloropyrazine-2,3-dicarbonitrile.

Novel synthesis of the title compounds by the cyclization between 2-amino-3-chloro-5,6-dicyanopyrazine (I) and various substituted pyridines is described. E.g., heating I with pyridines II (R = Me, Pr, Me3C, PhCH2, CONH2, CO2Me, Ph, 2-pyridyl) in DMF at 90° for 48 h gave 14-72% pyridoimidazopyrazines III.

Here is just a brief introduction to this compound(56413-95-7)Reference of 5,6-Dichloropyrazine-2,3-dicarbonitrile, more information about the compound(5,6-Dichloropyrazine-2,3-dicarbonitrile) is in the article, you can click the link below.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Product Details of 616-43-3. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Improved preparation of 3-methylpyrrole. Laboratory note. Author is Elguero, Jose; Jacquier, Robert; Shimizu, Bernard.

An improved synthesis of 3-methylpyrrole (I) and the N.M.R. spectra of the intermediates and product are given. Thus, 20 g. 3-carbethoxy-4-methyl-2-pyrrolecarboxylic acid is refluxed 1 hr. with 300 ml. 40% KOH, cooled, acidified with dilute HCl, filtered, washed with water, and dried to give 70% 4-methylpyrrole-2,3-dicarboxylic acid (II), m. 225°. II (12 g.) is added to 1 g. powd. Cu and heated under 50 mm. to dist. 87% I.

Compound(616-43-3)Product Details of 616-43-3 received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(3-Methyl-1H-pyrrole), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《A suitable solvent for molecular-weight determinations according to Rast》. Authors are Wendt, Gerhard.The article about the compound:cis-4-Aminocyclohexane carboxylic acidcas:3685-23-2,SMILESS:N[C@H]1CC[C@H](CC1)C(O)=O).Recommanded Product: 3685-23-2. Through the article, more information about this compound (cas:3685-23-2) is conveyed.

The lactam (I) of cis-hexahydro-p-aminobenzoic acid (II), m. 196°, results in 3.3-g. yield from 5 g. of the mixture of cis- and trans-II. For the separation of the 2 isomers of II, the hydrogenation product from 4 g. of p-H2NC6H4CO2H in 20 cc. H2O is treated with 180 cc. absolute EtOH to precipitate 1.9 g. crude cis-II, 2 crystallizations of which from dilute EtOH give the pure acid, m. 304-5°, sublimes 210-20°/6 × 10-4 mm.; contrary to the observation of Orthner and Hein (C. A. 27, 4776) the acid melts before sublimation; their transformation of the cis to the trans acid could not be verified. Addition of 400 cc. ether to the filtrate from the cis acid gives (standing 24 hrs.) 1.9 g. crude trans acid; this is purified by solution in 10 cc. H2O and precipitation with 125 cc. absolute EtOH; it m. 186-8° (decomposition), sublimes 210-20°/3 × 10-4 mm. I is a suitable substitute for camphor in the mol.-weight determination according to Rast. The m.-p. lowering constant is 40 (the same as camphor); the molar heat of melting is 1.37 kg.-cal. (for camphor 1.55 kg.-cal.). Because of the solubility in I, it is specially suitable for the determination of the mol. weights of di- and tripeptides (e. g., Me p-aminobenzoyl-p-aminobenzoate, Me p-nitrobenzoyl-p-aminobenzoyl-p-aminobenzoate, leucylglycine, glycylleucine), disaccharides (e. g., saccharose and cellobiose) and nucleosides (e. g., uridine and adenosine), most of which are insoluble in camphor. However, certain compounds (uric acid, creatine, glycylglycine) are insoluble in I.

Compound(3685-23-2)Recommanded Product: 3685-23-2 received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(cis-4-Aminocyclohexane carboxylic acid), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about TD-GC-MS investigation of the VOCs released from blood plasma of dogs with cancer.Quality Control of 3-Methyl-1H-pyrrole.

An anal. TD-GC-MS method was developed and used for the assessment of volatile organic compounds (VOCs) released from the blood plasma of dogs with/without cancer. VOCs released from 40 samples of diseased blood and 10 control samples were compared in order to examine the difference between both sample groups that were showing qual. similar results independent from the disease’s presence. However, mild disturbances in the spectra of dogs with cancer in comparison with the control group were observed, and six peaks (tentatively identified by comparison with mass spectral library as hexanal, octanal, toluene, 2-butanone, 1-octen-3-ol and pyrrole) revealed statistically significant differences between both sample groups, thereby suggesting that these compounds are potential biomarkers that can be used for cancer diagnosis based on the blood plasma TD-GC-MS anal. Statistical comparison with the application of principal component anal. (PCA) provided accurate discrimination between the cancer and control groups, thus demonstrating stronger biochem. perturbations in blood plasma when cancer is present.

Compound(616-43-3)Quality Control of 3-Methyl-1H-pyrrole received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(3-Methyl-1H-pyrrole), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Stereochemical investigations of 1,4-substituted cyclohexane derivatives. 4-Hydroxy- and 4-aminocyclohexane-1-carboxylic acid and their esters; and 4-hydroxy-1-hydroxymethylcyclohexane》. Authors are Schneider, Woldemar; Huettermann, A..The article about the compound:cis-4-Aminocyclohexane carboxylic acidcas:3685-23-2,SMILESS:N[C@H]1CC[C@H](CC1)C(O)=O).Electric Literature of C7H13NO2. Through the article, more information about this compound (cas:3685-23-2) is conveyed.

Malonic ester synthesis with ethyl β-chloropropionate, followed by ring closure of the product obtained gave 4-hydroxy-1-cyclohexanone (I). Hydrogenation of I (Raney-Ni, atm. pressure, room temperature) in alk. medium gave cis-4-hydroxycyclohexane-1-carboxylic acid (cis-II), m. 152°; Et ester, (cis-III) b12 130°. Hydrogenation of ethyl 4-hydroxybenzoic acid (Raney-Ni, 150 atm., 150°) gave trans-III, b13 139-140°, saponification of which gave the trans-II, m. 119.5°. Reduction of trans-III with Na-EtOH or LiAlH4, gave a cis-trans mixture of 4-hydroxy-1-hydroxymethylcyclohexane (IV), from which the trans isomer (V) was separated, m. 104°; the cis isomer (VI) was recovered by distillation from the residue. Hydrogenation of ethyl 4-aminobenzoic acid (Ru-C, 110 atm., 80°) gave a cis-trans mixture of 4-amino-1-carbethoxycyclohexane (VII), which was separated by distillation, giving cis-VII and trans-VII. The exptl. determined dipole moments (μ in Debye units) of these compounds are: cis-II 2.10 ± 0.1, trans-II 246 ± 0.002, cis-III 2.86 ± 0.03, trans-III 2.56 ± 0.04, VI 2.29 ± 0.02, V 2.60 ± 0.1, cis-VII 2.60 ± 0.01, and trans-VII 2.44 ± 0.02.

Compound(3685-23-2)Electric Literature of C7H13NO2 received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(cis-4-Aminocyclohexane carboxylic acid), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Lee, Bum Hoon; Jaung, Jae Yun; Jeong, Sung Hoon researched the compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile( cas:56413-95-7 ).Category: chiral-oxygen-ligands.They published the article 《Synthesis and dyeing properties of dicyanopyrazine dyes》 about this compound( cas:56413-95-7 ) in Journal of the Korean Fiber Society. Keywords: cyanopyrazine dye preparation use polyamide polyester. We’ll tell you more about this compound (cas:56413-95-7).

Reaction of 2,3-dichloro-5,6-dicyanopyrazine with various Fischer’s base type enamines gave the corresponding 2-chloro-5,6-dicyanopyrazine derivatives The reactive-disperse dyes showed large differences in λmax from solution to solid state resulting from strong intermol. π-π interactions. These dyes have rather small mol. size but have a strong intramol. charge-transfer chromophoric system. The absorption maxima of these compounds were observed at 463∼560 nm. The electronic character of the substituents in the dyes strongly affects their absorption spectra, producing bathochromic shifts depending on both the basicity of the heterocyclic moiety and the enlargement of the π-conjugated system. The dyeability of 2 of the dyes toward polyester and nylon fiber were generally good. Wash, perspiration, and rubbing fastness were excellent, while light fastness was poor, probably due to the oxidation of the enamine moiety.

Compound(56413-95-7)Category: chiral-oxygen-ligands received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Pyrrole Syntheses from Amino Ketones with Ketones and Ketone Esters》. Authors are Piloty, O.; Hirsch, P..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Computed Properties of C5H7N. Through the article, more information about this compound (cas:616-43-3) is conveyed.

The following pyrrole derivatives have been prepared by treating aqueous solutions of the HCl salts of amino ketones containing an excess of alk. with a ketone or ketone ester and allowing to stand a long time at a slightly elevated temperature in closed vessels. α-β’-Dimethylpyrrole, from Ac2NH2.HCl and AcMe; yield, 30%. α-Phenyl-β’-methylpyrrole, from 10 g. AcCH2NH2.HCl and 5 g. AcPh, m. 152°; yield, 1 g. α,β,β’-Trimethylpyrrole, from AcEt; yield, 28%. α-Ethyl-β,β’-dimethylpyrrole, b10 77-8° (yield, 0.4 g. from 14 g. AcCH3NH2.HCl and 10 g. Et2CO); picrjate, bright yellow, striated prisms, m. 122.5°. α,β,α’-Trimethylpyrrole, from AcCHMeNH2 and AcMe; yield, 50%. Some tetramethylpyrazine is formed in this reaction. AcCHMeNH2 and AcEt react only slowly and incompletely; the chief product is the pyrazine, but a little α,β,α’,β’-tetramethylpyrrole picrate (cf. Fischer and Bartholomäus, C. A., 7, 780) was isolated. Et α,β’-dimethylpyrrole-β-carboxylate, from AcCH2NH2 and AcCH2CO2Et. Monoethyl β-methylpyrrole-α’,β’-dicarboxylate, from 19 g. HO2CCOCH2CO2Et and 11 g. AcCH2NH2.HCl, monoclinic prisms, m. 196° (yield, 2-3 g.), converted by 20 hrs. b. with excess of 20% KOH into β-methylpyrrole-β’ (or α’)-carboxylic acid, flocks, m. 149°, losing CO2 and forming β-methylpyrrole, b11 45°. Monoethyl α,β-dimethylpyrrole-α’,β’-dicarboxylate, from AcCHMeNH2 and HO2CCOCH2CO2Et, prisms, m. 201° (loss of CO2). α,β-Dimethylpyrrole-β’ (or α’)-carboxylic acid, m. 188°. α,β-Dimethylpyrrole, b11 62°; picrate, bright yellow, felted needles, m. 146-5°; contrary to all other pyrrole derivatives, it has the comp. C18H21O7N5, i. e., 2 mols. pyrrole: 1 mol. picric acid.

Compound(616-43-3)Computed Properties of C5H7N received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(3-Methyl-1H-pyrrole), if you are interested, you can check out my other related articles.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate