Chiral oxygen ligands

4254-15-3, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.4254-15-3, name is (S)-Propane-1,2-diol. A new synthetic method of this compound is introduced below.

Compound I (1.5 gm, 3.8 mmol) was dissolved in MTBE (8 mL); the solution was slightly cloudy. To this was added (S)-1,2-propane diol[(S)-PG] (397 mg, 2 mL in MTBE). The reaction was stirred for five minutes; no solid was observed. Optionally, it is preferred, but not entirely necessary to add seed crystals (5 mg), at this stage, as is commonly known to one skilled in the art. Immediately cloudiness appeared and crystallization was observed. The reaction was stirred for 24 hr at room temperature, then filtered, and solid obtained was further dried in a desiccator at RT. A total of 1.10 gm complex was isolated. Mother liquor was cooled and an additional 0.5 gm complex was produced after drying. A total 1.55 gm (83percent) product was isolated.The seed crystals employed may be prepared by dissolving compound I in MTBE and treating the resulting solution with (S)-propylene glycol and proceeding as described above (without seeding) to form crystalline compound Ia.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of (S)-Propane-1,2-diol, CAS: 4254-15-3, you can also browse my other articles.

Reference£º
Patent; Bristol-Myers Squibb Company; US2008/287529; (2008); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

538-58-9, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.538-58-9, name is 1,5-Diphenylpenta-1,4-dien-3-one. A new synthetic method of this compound is introduced below.

538-58-9, Step 1. Under a nitrogen atmosphere, add 8 L of absolute ethanol and 0.112 kg of anhydrous sodium acetate to a glass reactor heated in a water bath.When the system temperature was heated to 68 C, 0.92 kg of dibenzylideneacetone obtained in Example 1 was added.After stirring for 30 minutes, add ice to the water bath heater to quickly cool the system down to 60 C.Then, 0.2 kg of palladium dichloride prepared in Example 1 was added and reacted at 60 C for 2 hours.Funnel filtration gave bis (dibenzylideneacetone) palladium (0);

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,5-Diphenylpenta-1,4-dien-3-one, CAS: 538-58-9, you can also browse my other articles.

Reference£º
Patent; Xi’an Kaili New Materials Co., Ltd.; Zhang Jielan; Chen Dan; Yan Pandun; Xiao Dawei; Li Yuefeng; Wan Kerou; (6 pag.)CN110256503; (2019); A;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.538-58-9, 1,5-Diphenylpenta-1,4-dien-3-one, introduce a new downstream synthesis route. 538-58-9

538-58-9, General procedure: To a stirred solution of alpha,beta-unsaturated carbonyl compound (1 mmol) in DCM was added thiophenol (2.5 mmol, 275 mg) followed by sodium metal (2.5 mmol, 57.5 mg) at room temperature. The reaction mixture was stirred appropriate time given in Table 3. TLC monitoring, after completion of reaction filtered excess amount of sodium then the reaction mixture was quenched with water and extracted with DCM (3 ¡Á 8 ml), washed with brine solutions (10 ml). The combined organic layers dried over anhydrous Na2SO4 and the solvent evaporated in vacuo. Pure sulfide was obtained by recrystallization from methanol.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 538-58-9, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Konduru, Naveen Kumar; Dey, Sunita; Sajid, Mohammad; Owais, Mohammad; Ahmed, Naseem; European Journal of Medicinal Chemistry; vol. 59; (2013); p. 23 – 30;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

24621-61-2, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.4254-15-3, name is (S)-Propane-1,2-diol. Here is a downstream synthesis route of the compound 4254-15-3

To a solution of commercial available (s)-3-hydroxy butanol (10 g, Aldrich) in 50 mL of DMF, TsOH (20 mg, catalytic) and MeOPhCH (OMe) 2 (24 g) were added. After 3h at 35 C on a rotovap with slight vacuum, it was cooled and quenched with aq. Sat. NaHC03. The mixture was extracted with EtOAc (3x). The organic layers were washed with brine (2x), dried and concentrated. The crude product was evaporated with toluene (3x). [0230] The crude product was dissolved in 700 mL of CH2CI2. At 0 C, DIBAL-H solution (200 mL, 1.0 M, excess) was added. The reaction was warmed to room temperature overnight. Then it was quenched with methanol (50 mL), sat. Na2S04 at 0 C. The mixture was diluted with Et20 (1. 5L). After stirred for 5h, it was filtered through a pad of celite. The filtrate was concentrated to give an oil. The oil was purified on silica gel with Hexanes/EtOAc, 10: 1,6 : 1,3 : 1, and 1: 1 to give 24 g of desired product, 343-YW-203, 24621-61-2

Thank you very much for taking the time to read this article. If you are also interested in other aspects of (S)-Butane-1,3-diol, CAS: 24621-61-2, you can also browse my other articles.

Reference£º
Patent; EISAI CO. LTD.; WO2003/76424; (2003); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.4254-15-3, name is (S)-Propane-1,2-diol. Here is a downstream synthesis route of the compound 4254-15-3, 4254-15-3

Example 18C N-[(2Z)-3-butyl[1,3]thiazolo[4,5-c]pyridin-2(3H)-ylidene]-2-{[(2S)-2-hydroxypropyl]oxy}-5-(trifluoromethyl)benzamide (S)-propane-1,2-diol (52 mg, 0.68 mmol) in THF (1 mL) was treated with NaH (60percent dispersion; 27 mg, 0.68 mmol) at room temperature for 20 minutes. The mixture was cooled to 0¡ã C. and a solution of Example 18B (90 mg, 0.23 mmol) in THF (1 mL) was added. The mixture was allowed to warm to room temperature, and stirred for 4 hours. The mixture was diluted with saturated aqueous NaHCO3 (20 mL) and extracted with ethyl acetate (2.x.30 mL). The combined organic extracts were dried over anhydrous Na2SO4, filtered, and concentrated. The residue was purified by column chromatography using an Analogix.(R). Intelliflash280.(TM). (SiO2, 0-100percent ethyl acetate in hexanes) to afford 19 mg (19percent) of the title compound. 1H NMR (500 MHz, CDCl3) delta ppm 1.04 (t, J=7.48 Hz, 3H) 1.28 (d, J=6.41 Hz, 3H) 1.47-1.59 (m, 2H) 1.88-1.98 (m, 2H) 3.87 (t, J=8.85 Hz, 1H) 4.21-4.31 (m, 1H) 4.35 (dd, J=9.15, 2.75 Hz, 1H) 4.51-4.59 (m, 2H) 7.12 (d, J=8.85 Hz, 1H) 7.72 (dd, J=8.54, 2.14 Hz, 2H) 8.51 (d, J=1.83 Hz, 2H) 8.75 (s, 1H); MS (DCI/NH3) m/z 454 (M+H)+.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of (S)-Propane-1,2-diol, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; ABBOTT LABORATORIES; US2011/144165; (2011); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.538-58-9, name is 1,5-Diphenylpenta-1,4-dien-3-one. A new synthetic method of this compound is introduced below. , 538-58-9

General procedure: In a general procedure, dibenzylidene acetone (1 mmol), N,N-dimethylbarbituric acid/barbituric acid/thiobarbituric acid(1 mmol) and 4 mL of ethanol:water (1:1) were taken in a 50 mL round-bottomed flask. 10 mol% of tetrabutyl ammonium bromide (TBAB) was added to the mixture, and the contents were stirred. The reaction mixture was refluxed and the progress of the reaction was monitored by TLC using ethyl acetate:petroleum ether (30:70) as eluent for disappearance of active methylene compounds. After completion of the reaction, the reaction mixture was allowed to cool to room temperature and diluted with water (5 mL). The solid obtained was filtered at pump and washed with water:ethanol (2:1). The product was recrystallized with ethanol. The products were characterized by their spectral data.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,5-Diphenylpenta-1,4-dien-3-one, CAS: 538-58-9, you can also browse my other articles.

Reference£º
Article; Aggarwal, Komal; Khurana, Jitender M.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 143; (2015); p. 288 – 297;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.24621-61-2, name is (S)-Butane-1,3-diol, below Introduce a new synthetic route. , 24621-61-2

(S)-(+)-Butane-1 ,3-diol (3.00 mmol, 0.270 g) was added to a stirred solution of imidazole (5.99 mmol, 0.41 g) and tert-butyldimethylsilyl chloride (3.00 mmol, 0.45 g) at room temperature. After six hours at room temperature water (50 mL) was added and extracted twice with dichloromethane (20 mL). The combined organic extracts were washed with brine, dried (sodium sulfate) and concentrated in vacuo to yield (S)-4- (tert-butyldimethylsilyloxy)butan-2-ol (0.654 g).

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of (S)-Butane-1,3-diol, CAS: 24621-61-2, you can also browse my other articles.

Reference£º
Patent; N.V. ORGANON; MAN de,, Adrianus Petrus Antonius; REWINKEL,, Johannes Bernardus Maria; JANS,, Christiaan Gerardus Johannes Maria; RAAIJMAKERS,, Hans Cornelis Andreas; WIJKMANS,, Jacobus Cornelis Henricus Maria; WO2011/95556; (2011); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.24621-61-2, name is (S)-Butane-1,3-diol. A new synthetic method of this compound is introduced below. , 24621-61-2

S- (+)-1, 3-butanediol (96 mg, 1.065 mmol) in 3 ml of pyridine was cooled in an ice-water bath and 4,4′-dimethoxytrityl chloride (430 mg, 1.27 mmol) was added thereto. The resulting mixture was stirred for 6 hours at room temperature. 10 ml of 5% NAHCO3 was added thereto and the resulting solution was extracted with 15 ml of ethyl acetate. The organic layer was dried over MGS04 and evaporated under a reduced pressure. The resulting yellow liquid residue was purified by silica gel column chlomatography (eluent-ethyl acetate: hexane = 1: 3) to obtain the title compound (401 mg, 1.02 mmol) in a yield of 96%. Rf= 0.3 (ethyl acetate: Hexane = 1 : 2); IR (NACI) nu (cm-1) 3462, 3059, 3034, 2959, 2927, 2848,2835, 1607,1508, 1250; 1H NMR (Acetone-d6) delta 7.49 (br, 1H), 7.46 (br, 1H), 7.36-7. 18 (m, 7H), 6.86 (t, 2H, J=2. 6Hz), 6.84 (t, 2H, J=2.6Hz), 3.93 (br, 1H), 3.73 (s, 6H), 3. 50 (br, 1H), 3.28-3. 14 (m, 2H), 1.73 (m, 2H), 1. 11 (d, 3H, J=6. 2Hz) ; 13C-NMR (75.5 MHz, Acetone-d6) delta 158. 1, 145. 3, 136. 1, 136.0, 129.5, 127. 6, 127.2, 126. 1, 112.5, 85. 4, 64. 2, 60. 6, 54. 2, 39.0, 23.1; MS-FAB (m/z): [M] + calcd for C25H28O4, 392; found 392.; [alpha] 21D = +17. 6 (c 1.0, CHCl3)

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of (S)-Butane-1,3-diol, CAS: 24621-61-2, you can also browse my other articles.

Reference£º
Patent; POSTECH FOUNDATION; WO2004/63208; (2004); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

538-58-9, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.538-58-9, name is 1,5-Diphenylpenta-1,4-dien-3-one. A new synthetic method of this compound is introduced below.

General procedure: A mixture of malononitrile (2a) (66 mg, 1 mmol), dibenzylideneacetone (6a) (234 mg, 1 mmol), tributylphosphine (25 mL, 0.1 mmol), and anhydrous CH2Cl2 (5.0 mL) was magnetically stirred in a flask under nitrogen atmosphere at room temperature. The reaction progress was monitored by thin layer chromatography (TLC) until the starting materials were completely consumed. Then, the reaction mixture was diluted with H2O (10 mL) and extracted with Et2O (3×10 mL), the organic phase was washed with brine (10 mL), dried over anhydrous Na2SO4. After the removal of the solvent under reduced pressure, the residue was subjected to chromatography on a silica gel (200-300 mesh) column using petroleum ether/ethyl acetate (4:1) as eluent to afford 7a (286 mg, 95% yield) as a light yellow solid (mp 170-171 C).

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,5-Diphenylpenta-1,4-dien-3-one, CAS: 538-58-9, you can also browse my other articles.

Reference£º
Article; Xu, Da-Zhen; Zhan, Ming-Zhe; Huang, You; Tetrahedron; vol. 70; 2; (2014); p. 176 – 180;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

538-58-9, The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.538-58-9, name is 1,5-Diphenylpenta-1,4-dien-3-one. A new synthetic method of this compound is introduced below.

.) Synthesis According to Inorganic Synthesis, 28, 110 (1990)The synthesis is carried out under inert gas. 2.096 g (11.73 mmol) PdCl2 and 0.686 g (11.73 mmol) NaCl are provided under argon, and 59 ml of methanol are added.Next the reaction mixtures is stirred over night for 18 hours in the sealed flask. Then the dark red-brown solution is filtered through a G3 frit under argon. No residue is evident on the frit.The filtrate solution is transferred to a 500 ml three-necked flask using 293 ml of methanol, and heated to 60 C. At this temperature, 8.563 g (36.54 mmol) dibenzylidene acetone are added under argon. Then, the addition of 17.595 g (214.49 mmol) sodium acetate is made.A voluminous, reddish solid precipitates. Subsequently, the reaction mixture is cooled to room temperature. The product is removed by filtration and washed with 300 ml of methanol, 300 ml of water, and 300 ml of acetone. The product is dried in vacuo at room temperature.Appearance: dark-brown solidSolubility Test:1.00 g of the product are dissolved in 150 ml of chloroform and stirred at room temperature for 30 minutes. The solution is then aspirated through a membrane filter. The filter is washed with 30 ml of water and 30 ml of acetone and subsequently dried over night at 45 C. in vacuo. The residue accounts for 1.4%.Result:m(product): 6.4 gYield with respect to Pd: 94CHCl3-insoluble ingredients: 1.4

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,5-Diphenylpenta-1,4-dien-3-one, CAS: 538-58-9, you can also browse my other articles.

Reference£º
Patent; W.C. Heraeus GmbH; US7999126; (2011); B2;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate