Chiral oxygen ligands

24621-61-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Butane-1,3-diol, cas is 24621-61-2,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

To a solution of commercial available (s)-3-hydroxy butanol (10 g, Aldrich) in 50 mL of DMF, TsOH (20 mg, catalytic) and MeOPhCH (OMe) 2 (24 g) were added. After 3h at 35 C on a rotovap with slight vacuum, it was cooled and quenched with aq. Sat. NaHC03. The mixture was extracted with EtOAc (3x). The organic layers were washed with brine (2x), dried and concentrated. The crude product was evaporated with toluene (3x). [0230] The crude product was dissolved in 700 mL of CH2CI2. At 0 C, DIBAL-H solution (200 mL, 1.0 M, excess) was added. The reaction was warmed to room temperature overnight. Then it was quenched with methanol (50 mL), sat. Na2S04 at 0 C. The mixture was diluted with Et20 (1. 5L). After stirred for 5h, it was filtered through a pad of celite. The filtrate was concentrated to give an oil. The oil was purified on silica gel with Hexanes/EtOAc, 10: 1,6 : 1,3 : 1, and 1: 1 to give 24 g of desired product, 343-YW-203

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (S)-Butane-1,3-diol, 24621-61-2

Reference£º
Patent; EISAI CO. LTD.; WO2003/76424; (2003); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

538-58-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,5-Diphenylpenta-1,4-dien-3-one, cas is 538-58-9,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of dialkyl phosphite (0.01 mol) in anhydrous tetrahydrofuran (30 mL),maintained under a nitrogen atmosphere, sodium (0.02 g) was added and the mixture was stirred at roomtemperature until complete dissolution of sodium. Diarylideneketone 1 (0.01 mol) was then added and themixture heated under reflux for 4 h. After cooling, the reaction mixture was diluted with water (50 mL)and extracted with CHCl3 (2 ¡Á 25 mL). The organic phase was dried over Na2SO4 and concentrated undervacuum. The obtained residue was chromatographed on a silica gel column using a mixture of Et2O andhexane 9:1 as an eluent.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,5-Diphenylpenta-1,4-dien-3-one, 538-58-9

Reference£º
Article; Lamouchi, Imen; Touil, Soufiane; Heterocycles; vol. 94; 5; (2017); p. 894 – 911;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

538-58-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1,5-Diphenylpenta-1,4-dien-3-one, cas is 538-58-9,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a stirred solution of indole 1a (59 mg, 0.5 mmol) and chalcone 2a (115 mg, 0.55 mmol) in MeCN (2.0mL) was added a solution of Br2 (0.00077 mL) in MeCN (0.5 mL), and the mixture was stirred for 7.0 h at 50 C. After 1a was consumed, as indicated by TLC, the reaction mixture was quenched with saturated aqueous Na2S2O3 (0.2mL) and water (10.0 mL), and extracted with CH2Cl2 three times. The residue obtained after evaporation of the solvent was purified by column chromatography on silica gel (petroleum ether-ethyl acetate = 30:1, v/v) to afford adduct 3a as a white solid (151 mg, 93% yield).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1,5-Diphenylpenta-1,4-dien-3-one, 538-58-9

Reference£º
Article; Liang, Deqiang; Li, Xiangguang; Zhang, Wanshun; Li, Yanni; Zhang, Mi; Cheng, Ping; Tetrahedron Letters; vol. 57; 9; (2016); p. 1027 – 1030;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

As a common heterocyclic compound, it belongs to chiral-oxygen-ligands compound, name is (S)-Butane-1,3-diol, and cas is 24621-61-2, its synthesis route is as follows.

EXAMPLE INEL SynthesisPreparation of (3S)-1-p-Toluenesulfonyloxy-3-triethylsilyloxy-butane (2); To a stirred solution of the (S)-(+)-1,3-butanediol 1 (1 g, 11.1 mmol), DMAP (30 mg, 0.25 mmol) and Et3N (4.6 mL, 3.33 g, 33 mmol) in anhydrous methylene chloride (20 mL)p-toluenesulfonyl chloride (2.54 g, 13.3 mmol) was added at 0 C. The reaction mixture was stirred at 4 C. for 22 h. Methylene chloride was added and the mixture was washed with water, dried (Na2SO4) and concentrated under reduced pressure. A residue was chromatographed on silica gel with hexane/ethyl acetate (8:2, then 1:1) to afford the tosylate (2.31 g, 85% yield) as colorless oil.To a stirred solution of the tosylate (2.31 g, 9.5 mmol) and 2,6-lutidine (1.2 mL, 1.12 g, 10.5 mmol) in anhydrous methylene chloride (15 mL) triethylsilyl trifluoromethanesulfonate (2.1 mL, 2.51 g, 9.5 mmol) was added at -50 C. The reaction mixture was allowed to warm to room temperature (4 h) and stirring was continued for additional 20 h. Methylene chloride was added and the mixture was washed with water, dried (Na2SO4) and concentrated under reduced pressure. A residue was chromatographed on silica gel with hexane/ethyl acetate (97:3) to afford the product 2 (2.71 g, 80% yield) as a colorless oil:[alpha]D+18.0 (c 2.38, CHCl3); 1H NMR (400 MHz, CDCl3) delta7.77 (2H, d, J=8.2 Hz, o-HTs), 7.33 (2H, d, J=8.2 Hz, m-HTs), 4.10 (2H, t, J=6.1 Hz, 1-H2), 3.90 (1H, m, 3-H), 2.43 (3H, s, McTs), 1.72 (2H, m, 2-H2), 1.10 (3H, d, J=6.2 Hz, 4-H3), 0.88 (9H, t, J=8.0 Hz, 3¡ÁSiCH2CH3), 0.50 (6H, q, J=8.0 Hz, 3¡ÁSiCH2CH3); 13C NMR (100 MHz) delta 144.62 (s, p-CTs), 133.03 (s, i-CTs), 129.72 (d, m-CTs), 127.82 (d, o-CTs), 67.78 (t, C-1), 64.46 (d, C-3), 38.47 (t, C-2), 23.82 (q, C-4), 21.52 (q, MeTs), 6.71 (q, SiCH2CH3), 4.77 (t, SiCH2CH3); MS (EI) m/z 359 (5, MH+), 329 (87, M+ -C2H5), 259 (100), 233 (54), 197 (50), 179 (74), 163 (40), 149 (48), 135 (38), 115 (53), 91 (71); exact mass calculated for C15H25O4SSi (M+ -C2H5) 329.1243, found 329.1239.

24621-61-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,24621-61-2 ,(S)-Butane-1,3-diol, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; WISCONSIN ALUMNI RESEARCH FOUNDATION; US2007/191316; (2007); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

4254-15-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Propane-1,2-diol, cas is 4254-15-3,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

Example 33 : (2R, 75R)-2-[(l-Aminoisoquinolin-6-yl)amino]-8-fluoro-7- {[(25)-l- hydroxypropan-2-yl]oxy } -4, 15,20-trimethyl- 13 -oxa-4, 1 1- diazatricyclo[14.2.2.16, 10]henicosa-l(18),6,8, 10(21), 16, 19-hexaene-3, 12-dione; trifluoroacetic acid [00356] To a solution of (s)-(+)-l,2-propanediol (2.0 g, 26.3 mmol) in DMF (5 mL) was added TBS-C1 (5.94 g, 39.4 mmol) and imidazole (2.147 g, 31.5 mmol). The reaction was stirred at 25 ¡ãC for 18 h. The reaction mixture was partitioned between ethyl acetate and sat. ammonium chloride. The organic phase was washed with sat. ammonium chloride and brine, dried (MgS04) and concentrated in vacuo. The crude product was purified by flash chromatography to give 33A (4.0 g, 80percent yield) as a colorless oil. 33B: (5)-Benzyl 2-((l-((tert-butyldimethylsilyl)oxy)propan-2-yl)oxy)-3-fluoro-5- nitrobenzyl(methyl)carbamate [00357] To a solution of 27B (400 mg, 1.197 mmol), 33A (251 mg, 1.316 mmol) and triphenylphosphine (345 mg, 1.316 mmol) in THF (10 mL) at 0 ¡ãC, was added DIAD (0.256 mL, 1.316 mmol) dropwise. The reaction mixture was allowed to slowly warm to rt and stirred for 16 h, then was concentrated. The crude product was purified by flash chromatography (0 to 40percent ethyl acetate/hexanes) to give 33B (577 mg, 1.139 mmol, 95percent yield) as colorless oil. MS (ESI) m/z: 507.1 [M+1]+. H MR (400 MHz, chloroform-d) delta ppm 7.78 – 7.94 (2 H, m) 7.27 – 7.43 (5 H, m) 5.17 (2 H, d, J=20.1 Hz) 4.46 – 4.74 (3 H, m) 3.65 – 3.81 (2 H, m) 2.97 (3 H, d, J=15.8 Hz) 1.31 (3 H, t, J=7.0 Hz) 0.81 (9 H, d, J=7.0 Hz) -0.05 – 0.04 (6 H, m) rotamers. 33C: (S)-4-((l-((tert-Butyldimethylsilyl)oxy)propan-2-yl)oxy)-3-fluoro-5- ((methylamino)methyl)aniline [00358] To a degassed solution of 33B (573 mg, 1.131 mmol) in MeOH (10 mL), was added 10percent Pd-C (50 mg, 0.047 mmol). The mixture was evacuated and flushed with H2 (3X), then was stirred under an atmosphere of H2 for 8 h. The mixture was filtered and concentrated to give 33C (382 mg, 1.115 mmol, 99percent yield) as a pale brown oil. MS (ESI) m/z: 343.1 [M+l]+. PI MR (400 MHz, chloroform-d) delta ppm 6.40 (1 H, d, J=1.8 Hz) 6.33 (1 H, dd, J=12.5, 2.8 Hz) 4.20 (1 H, sxt, J=5.7 Hz) 3.62 – 3.79 (4 H, m) 3.53 (2 H, br. s.) 2.40 (3 H, s) 1.25 (3 H, d, J=6.3 Hz) 0.89 (9 H, s) 0.05 (6 H, s). 33D: tert-Butyl N- {6-[({[(5-amino-2- { [(25)- l-[(tert-butyldimethylsilyl)oxy]propan-2- yl]oxy } -3 -fluorophenyl)methyl](methyl)carbamoyl} ( {4-[(2R)- 1 -hydroxypropan-2-yl]-3 – methylphenyl} )methyl)amino]isoquinolin- 1 -yl} -N-[(tert-butoxy)carbonyl]carbamate [00359] To Intermediate 5 (100 mg, 0.515 mmol), Intermediate 1 (185 mg, 0.515 mmol), and glyoxylic acid monohydrate (47.4 mg, 0.515 mmol), were added DMF (6.00 mL) and acetonitrile (6 mL). The mixture was stirred at 80 ¡ãC for 1 h, then was cooled to rt. To the mixture were added sequentially 33C (201 mg, 0.587 mmol), DMF (6.00 mL), TEA (0.215 mL, 1.546 mmol) and BOP (251 mg, 0.567 mmol). The reaction mixture was stirred at rt for 1 h, then was diluted with H20 and extracted with EtOAc (3X). The extract was washed with brine, dried ( a2S04) and concentrated. The crude product was purified by flash chromatography (1 to 15percent MeOH/methylene chloride) to give 33D (422 mg, 0.474 mmol, 92percent yield) as an orange foam. MS (ESI) m/z: 890.3 [M+l]+. H MR: complicated due to presence of diastereomers and amide rotamers. Example 33 [00360] To a solution of 33D (417 mg, 0.468 mmol) in dichloromethane (10 mL) and acetonitrile (5 mL) at 0 ¡ãC, was added phosgene (20percent in toluene, 0.243 mL, 0.492 mmol) dropwise. The mixture was stirred at 0 ¡ãC for 20 min, then was removed from the cooling bath and bubbled with Ar for 20 min. This mixture was added dropwise via a syringe pump into a solution of TEA (0.392 mL, 2.81 mmol) in dichloromethane (190 mL) over 5 h. The reaction mixture was allowed to stir at rt for 11 h, and then concentrated. The crude product was purified by flash chromatography (1 to 15percent MeOH/methylene chloride) to give a mixture of diastereoisomers. The diastereomers were separated by a prep chiral HPLC (R,R-Whelk-0 column 21.1 x 250 mm). The desired fractions were combined and concentrated. The residue was treated with TFA (4 mL) for 15 min. The reaction mixture was concentrated and purified by prep HPLC to give Example 33 (52.9 mg, 0.074 mmol, 31.4percent yield) white solid. MS (ESI) m/z: 602.2 [M+l]+. NMR (400 MHz, methanol-d4) delta ppm 8.05 (1 H, d, J=9.3 Hz) 7.64 (1 H, dd, J=7.8, 1.8 Hz) 7.44 (1 H, d, J=7.8 Hz) 7.31 (1 H, d, J=7.0 Hz) 7.18 – 7.23 (2 H, m) 6.91 (1 H, d, J=7.3 Hz) 6.83 (1 H, d, J=2.3 Hz) 6.53 (1 H, dd, J=12.4, 2.4 Hz) 5.73 (1 H, s) 5.66 (1 H, br. s.) 5.37 (1 H, d, J=17.1 Hz) 4.65 (1 H, t, J=11.0 Hz) 4.27 – 4.38 (1 H, m, J=5.7, 5.7, 5.7, 5.7, 5.4 Hz) 4.06 (1 H, d, J=17.3 Hz) 3.96 (1 H, dd, J=10.8, 4.3 Hz) 3.63 (2 H, d, J=4.8 Hz) 3.43 – 3.55 (1 H, m) 3.27 (3 H, s) 2.34 (3 H, s) 1.30 (3 H, d, J=7.0 Hz) 1.27 (3 H, d, J=6.3 Hz). Analytical HPLC (low pH, 254 nM): Sunfir…

The chemical industry reduces the impact on the environment during synthesis,4254-15-3,(S)-Propane-1,2-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; ZHANG, Xiaojun; GLUNZ, Peter W.; PRIESTLEY, Eldon Scott; JOHNSON, James, A.; WURTZ, Nicholas, Ronald; LADZIATA, Vladimir; WO2013/184734; (2013); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

24621-61-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Butane-1,3-diol, cas is 24621-61-2,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

Example 1 Preparation of (3S)-1-p-Toluenesulfonyloxy-3-triethylsilyloxy-butane (2)To a stirred solution of the (S)-(+)-1,3-butanediol 1 (1 g, 11.1 mmol), DMAP (30 mg, 0.25 mmol) and Et3N (4.6 mL, 3.33 g, 33 mmol) in anhydrous methylene chloride (20 mL) p-toluenesulfonyl chloride (2.54 g, 13.3 mmol) was added at 0 C. The reaction mixture was stirred at 4 C. for 22 h. Methylene chloride was added and the mixture was washed with water, dried (Na2SO4) and concentrated under reduced pressure. A residue was chromatographed on silica gel with hexane/ethyl acetate (8:2, then 1:1) to afford the tosylate (2.31 g, 85% yield) as a colorless oil.To a stirred solution of the tosylate (2.31 g, 9.5 mmol) and 2,6-lutidine (1.2 mL, 1.12 g, 10.5 mmol) in anhydrous methylene chloride (15 mL) triethylsilyl trifluoromethanesulfonate (2.1 mL, 2.51 g, 9.5 mmol) was added at -50 C. The reaction mixture was allowed to warm to room temperature (4 h) and stirring was continued for additional 20 h. Methylene chloride was added and the mixture was washed with water, dried (Na2SO4) and concentrated under reduced pressure. A residue was chromatographed on silica gel with hexane/ethyl acetate (97:3) to afford the product 2 (2.71 g, 80% yield) as a colorless oil:[alpha]D+18.0 (c 2.38, CHCl3); 1H NMR (400 MHz, CDCl3) delta 7.77 (2H, d, J=8.2 Hz, o-HTs), 7.33 (2H, d, J=8.2 Hz, m-HTs), 4.10 (2H, t, J=6.1 Hz, 1-H2), 3.90 (1H, m, 3-H), 2.43 (3H, s, MeTs), 1.72 (2H, m, 2-H2), 1.10 (3H, d, J=6.2 Hz, 4-H3), 0.88 (9H, t, J=8.0 Hz, 3¡ÁSiCH2CH3), 0.50 (6H, q, J=8.0 Hz, 3¡ÁSiCH2CH3); 13C NMR (100 MHz) delta 144.62 (s, p-CTs), 133.03 (s, i-CTs), 129.72 (d, m-CTs), 127.82 (d, o-CTs), 67.78 (t, C-1), 64.46 (d, C-3), 38.47 (t, C-2), 23.82 (q, C-4), 21.52 (q, MeTs), 6.71 (q, SiCH2CH3), 4.77 (t, SiCH2CH3); MS (EI) m/z 359 (5, MH+), 329 (87, M+-C2H5), 259 (100), 233 (54), 197 (50), 179 (74), 163 (40), 149 (48), 135 (38), 115 (53), 91 (71); exact mass calculated for C15H25O4SSi (M+-C2H5) 329.1243, found 329.1239.

The chemical industry reduces the impact on the environment during synthesis,24621-61-2,(S)-Butane-1,3-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; DeLuca, Hector F.; Clagett-Dame, Margaret; Plum, Lori A.; Chiellini, Grazia; Grzywacz, Pawel; US2009/170821; (2009); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

4254-15-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Propane-1,2-diol, cas is 4254-15-3,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

(S)-(+)-1,2-propanediol (2.506 g, 32.9 mmol) and 4-methylbenzene-1-sulfonyl chloride (6.91 g, 36.2 mmol) in dichloromethane (DCM) (80 mL) Medium solution,Triethylamine (6.89 mL, 49.4 mmol),Subsequently 4-dimethylaminopyridine (0.201 g, 1.647 mmol) was added.The reaction was stirred at room temperature for 16 hours.The reaction was quenched with saturated aqueous ammonium chloride (20 mL) and the layers were separated.Extract the aqueous portion with DCM (2 ¡Á 20 mL),The combined organic layers were washed with saturated aqueous sodium bicarbonate (20 mL) and brine (20 mL).The organic portion is dried over MgSO4, filtered,Concentrate under reduced pressure to give a residue that isPurification by silica gel chromatography eluting with 10-100% ethyl acetate: heptane gave the product (4.56 g, 60% yield).

The chemical industry reduces the impact on the environment during synthesis,4254-15-3,(S)-Propane-1,2-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Abbvie Incorporated; Argiriadi, Maria A.; Breinlinger, Eric C.; Chien, Ellen Yulin Tsai; Cowart, Marlon D.; Frank, Kristine E.; Friedman, Michael M.; Hardy, David J.; Herold, J. Martin; Liu, Huaqing; Chu, Wei; Scanio, Marc J.; Schrimpf, Michael R.; Vargo, Thomas R.; Van Epps, Stacy A.; Webster, Matthew P.; Little, Andrew J.; Dunstan, Teresa A.; Katcher, Matthew H.; Schedler, David A.; (232 pag.)JP6557436; (2019); B1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

24621-61-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Butane-1,3-diol, cas is 24621-61-2,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

(Example 5-1) Under ice cooling, to a dichloromethane solution (20.0 ml) of (S)-1,3-butanediol (519 mg) were added triethylamine (1.04 ml) and tert-butylchlorodiphenylsilane (1.63 ml), followed by stirring at room temperature overnight. The reaction solution was poured into a saturated aqueous ammonium chloride solution, and extracted with ethyl acetate. The organic layer was washed with saturated sodium chloride solution, dried over anhydrous sodium sulfate, and concentrated under reduced pressure. The resulting residue was purified by silica gel chromatography to afford (2S)-4-{[tert-butyl(diphenyl)silyl]oxy}butan-2-ol (1.69 g). 1H NMR(400 MHz,CDCl3) delta: 1.05 (9H, s), 1.22 (3H, d, J = 6.3 Hz), 1.58-1.68 (1H, m), 1.69-1.81 (1H, m), 3.31 (1H, d, J = 2.0 Hz), 3.80-3.91 (2H, m), 4.07-4.15 (1H, m), 7.37-7.50 (6H, m), 7.69 (4H, d, J = 6.2 Hz).

The chemical industry reduces the impact on the environment during synthesis,24621-61-2,(S)-Butane-1,3-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Daiichi Sankyo Company, Limited; EP2471792; (2012); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

24621-61-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Butane-1,3-diol, cas is 24621-61-2,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

Example 1; Preparation of (3S)-1-p-Toluenesulfonyloxy-3-triethylsilyloxy-butane (2); To a stirred solution of the (S)-(+)-1,3-butanediol 1 (1 g, 11.1 mmol), DMAP (30 mg, 0.25 mmol) and Et3N (4.6 mL, 3.33 g, 33 mmol) in anhydrous methylene chloride (20 mL) p-toluenesulfonyl chloride (2.54 g, 13.3 mmol) was added at 0 C. The reaction mixture was stirred at 4 C. for 22 h. Methylene chloride was added and the mixture was washed with water, dried (Na2SO4) and concentrated under reduced pressure. A residue was chromatographed on silica gel with hexane/ethyl acetate (8:2, then 1:1) to afford the tosylate (2.31 g, 85% yield) as a colorless oil.

The chemical industry reduces the impact on the environment during synthesis,24621-61-2,(S)-Butane-1,3-diol,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; DeLuca, Hector F.; Clagett-Dame, Margaret; Plum, Lori A.; Chiellini, Grazia; Grzywacz, Pawel; US2008/81799; (2008); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

4254-15-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (S)-Propane-1,2-diol, cas is 4254-15-3,the chiral-oxygen-ligands compound, it is a common compound, a new synthetic route is introduced below.

To a stirred solution of (A)-propane-l,2-diol (5 g, 65.7 mmol) in anhydrous DCM (40 mL) at 0 C, was added imidazole (4.47 g, 65.7 mmol), followed by TBDMS-C1 (10.89 g, 72.3 mmol). After being stirred at room temperature for 4 h, the reaction mixture was cooled to 0C, and partitioned between sodium bicarbonate solution (50 ml) and DCM (200 mL). The organic layer was washed with EhO, and saturated NaCl solution, dried over anhydrous Na2S04, filtered and concentrated under reduced pressure fV)- l -((/tW-butyl dimethyl si lyl)oxy)propan-2-ol ^2 g, 63.0 mmol, 96% ) as colourless oil. NMR (400 MHz, chloroform-^ d ppm 3.73 – 3.88 (m, 1H), 3.51 – 3.65 (m, 1H), 3.29 – 3.46 (m, 1H), 2.36 – 2.56 (m, 1H), 1.12 (d, J=6.53 Hz, 3H), 0.90 – 0.96 (m, 9H), 0.06 – 0.13 (m, 6H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (S)-Propane-1,2-diol, 4254-15-3

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; BALOG, James Aaron; SEITZ, Steven P.; WILLIAMS, David K.; ANDAPPAN MURUGAIAH SUBBAIAH, Murugaiah; (191 pag.)WO2019/136112; (2019); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate