Chiral oxygen ligands

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

Example 7A (2S)-4-((tert-butyl(dimethyl)silyl)oxy)-2-butanol A 0 C. solution of (S)-(+)-1,3-butanediol (2.1 g, 23.3 mmol), imidazole (1.74 g, 25.6 mmol), and N,N-dimethylformamide (1.0 mL) in dichloromethane (40 mL) was treated with tert-butyl-dimethylsilyl chloride (3.68 g, 23.3 mmol). The reaction mixture was warmed to room temperature, stirred overnight, quenched with saturated aqueous ammonium chloride and extracted with dichloromethane. The combined dichloromethane layers were dried (MgSO4), filtered and concentrated to afford of the desired product of sufficient purity for subsequent use without further purification in near quantitative yield. MS (DCI/NH3) m/z 205 (M+H)+; 1H NMR (300 MHz, CDCl3) delta3.95 (m, 1H), 3.79 (m, 2H), 3.27 (br s, 1H), 1.56 (m 2H), 1.11 (d, 3H), 0.82 (s, 9H), 0.016 (s, 6H).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

Reference£º
Patent; Bennani, Youssef L.; Black, Lawrence A.; Dwight, Wesley J.; Faghih, Ramin; Gentles, Robert G.; Liu, Huaqing; Phelan, Kathleen M.; Vasudevan, Anil; Zhang, Henry Q.; US2001/49367; (2001); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

538-58-9 A common heterocyclic compound, 538-58-9,1,5-Diphenylpenta-1,4-dien-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: In a general procedure, dibenzylidene acetone (1 mmol), N,N-dimethylbarbituric acid/barbituric acid/thiobarbituric acid(1 mmol) and 4 mL of ethanol:water (1:1) were taken in a 50 mL round-bottomed flask. 10 mol% of tetrabutyl ammonium bromide (TBAB) was added to the mixture, and the contents were stirred. The reaction mixture was refluxed and the progress of the reaction was monitored by TLC using ethyl acetate:petroleum ether (30:70) as eluent for disappearance of active methylene compounds. After completion of the reaction, the reaction mixture was allowed to cool to room temperature and diluted with water (5 mL). The solid obtained was filtered at pump and washed with water:ethanol (2:1). The product was recrystallized with ethanol. The products were characterized by their spectral data.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,5-Diphenylpenta-1,4-dien-3-one,538-58-9,its application will become more common.

Reference£º
Article; Aggarwal, Komal; Khurana, Jitender M.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 143; (2015); p. 288 – 297;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

To a solution of (S)-1,3-butanediol (807 mg) in DMF (10 mL) at 0C was added potassium t-butoxide (7.2 mL of a 1M solution in THF). After 1 h, the mixture was cooled to -20C and then 2-chloro-3-(4-methylsulfonyl)phenyl-5-trifluoromethylpyridine (1 g) was added as a solid. The resulting mixture was stirred for 24 h, warming to r.t. To the mixture was added saturated NH4Cl and the mixture was extracted with ethyl acetate. The organics were dried (MgSO4) and concentrated. Flash chromatography (1:1 hexane/ethyl acetate) provided the title compound as a white solid (323 mg).1H NMR (300 MHz, acetone-d6): d 1.15 (d, 3H), 1.75-2.00 (m, 2H), 3.15 (s, 3H), 3.65 (d, 1H), 3.85-4.00 (m, 1H), 4.60 (dd, 2H), 7.95 (d, 2H), 8.03 (d, 2H), 8.10 (d, 1H), 8.57 (d, 1H).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(S)-Butane-1,3-diol,24621-61-2,its application will become more common.

Reference£º
Patent; MERCK FROSST CANADA & CO.; EP1012142; (2004); B1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

538-58-9 A common heterocyclic compound, 538-58-9,1,5-Diphenylpenta-1,4-dien-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

538-58-9, General procedure: A mixture of unsaturated ketone 1a (60.7 mg, 0.25 mmol) and phosphonium salt 2a (198.6 mg, 0.45 mmol) in CH3CN (2 mL) was stirred for 5 min. Then DBU (127 muL) in CH3CN (0.5 mL) was added. The reaction mixture was stirred at 60 C for 6 h and then air was introduced with a balloon for another 42 h. After the reaction was completed, the reaction mixture was filtered through a short silica gel column and washed with DCM. The filtrate was concentrated under reduced pressure and the residue was purified by flash chromatography (PE/EtOAc, 60/1) to afford 3a as a colorless oil (69.3 mg, 86% yield).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,5-Diphenylpenta-1,4-dien-3-one,538-58-9,its application will become more common.

Reference£º
Article; Shu, Zhen-Cao; Zhu, Jian-Bo; Liao, Saihu; Sun, Xiu-Li; Tang, Yong; Tetrahedron; vol. 69; 1; (2013); p. 284 – 292;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 538-58-9,1,5-Diphenylpenta-1,4-dien-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 538-58-9

Bis(dibenzylideneacetone)palladium(0) (Pd(dba)2)was synthesized by reducing PdCl2 with methanol in thepresence of sodium acetate and dba [30]. Dibenzylideneacetone(3.4500 g, 1.472 ¡Á 10-2 mol), sodium acetatetrihydrate (4.8525 g, 3.568 ¡Á 10-2 mol), and methanol(113 mL) were placed in a two-neck round-bottomflask. The reaction mixture was stirred at 50C for 45-60 min to obtain a solution, and PdCl2 (0.7875 g,4.434 ¡Á 10-3 mol) was added. The resulting solutionwas stirred in an argon atmosphere at 40C for 4 h.This yielded a dark violet precipitate of the Pd(dba)2complex, which was collected on a fritted glass filterunder argon, washed with water and acetone, andvacuum-dried (30C/2-3 Torr) for 3 h. The productyield was 2.4 g. (94% of the theoretical yield); m =152C. According to the literature, m of thePd(dba)2 complex is 152C [31]. UV spectra:Pd(dba)2, 525 nm (d ? d* transition, epsilon525 =6400 L mol-1 cm-1); non-coordinated dba, 325 nm(n ? pi* transition, epsilon325 = 33540 L mol-1 cm-1).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,538-58-9,1,5-Diphenylpenta-1,4-dien-3-one,its application will become more common.

Reference£º
Article; Skripov; Belykh; Sterenchuk; Akimov; Tauson; Schmidt; Kinetics and Catalysis; vol. 58; 1; (2017); p. 34 – 45; Kinet. Katal.; vol. 58; 1; (2017); p. 36 – 48,13;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

Example 63 (R)-3- {2-CHLORO-4- [3- (4-CHLORO-2-PHENOXY-PHENOXY)-BUTOXY]-PHENYL}-PROPIONIC acid Step A (S) -Acetic acid 3-hydroxy-butyl ester; A mixture of (S)- (+)-1, 3-butanediol (10.0 g, 0.1 mol) and 2,4, 6-collidine (27 g, 0.2 mol) in DCM (100 mL) is cooled to-78 C. The reaction is then treated dropwise with acetyl chloride (10.4 g, 0.13 mol), and stirred for 2hr AT-78 C. The reaction is then allowed to warm to rt and stir for an additional hour. The reaction is then quenched with IN HCl and extracted with DCM. The organic layer is separated, washed with brine, and dried over NA2SO4. The organic is filtered, and the solvent is removed to afford 9.77 g (66%) of acetic acid 3-hydroxy-butyl ESTER. IH NMR (400 MHz, CDC13) ; MS (ES+) NILZ mass calcd for C6HI203 132, found 133 (M + 1)., 24621-61-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

Reference£º
Patent; ELI LILLY AND COMPANY; WO2005/19151; (2005); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 4254-15-3,(S)-Propane-1,2-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 4254-15-3

To (S)-propane diol (4.89 g, 64.2 mmol) in DCM (20 ml_) at -20 0C (CO2/ ethylene glycol bath) was added TEA (11.2 ml_, 80.3 mmol) followed by p-toluenesulfonyl chloride (12.3 g, 64.3 mmol) in DCM (26 mL) dropwise over 30 minutes. The cold bath was allowed to expire while stirring for 26h. DCM was added and the reaction was washed with 1 N HCI, water, and brine. The organic layer was dried (MgSO4), filtered, and concentrated in vacuo. The residue was purified by silica gel chromatography (0-40% EtOAc/Hex over 40 minutes) to provide the tosylate (8.37 g, 36 .4 mmol).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(S)-Propane-1,2-diol,4254-15-3,its application will become more common.

Reference£º
Patent; SCHERING CORPORATION; WO2009/5645; (2009); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

Production of (S)-3-Hydroxy-1-(p-toluenesulfonyloxy)butane In the same manner as in the first step of Production Example 32, the desired compound (77.5 g) was obtained as light brown oil from (S)-1,3-butanediol (30.0 g) and p-toluenesulfonyl chloride (69.8 g). The thus-obtained oil was immediately subjected to the next step.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

Reference£º
Patent; Fujisawa Pharmaceutical Co., Ltd.; US6420409; (2002); B1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

To a solution of commercial available (s)-3-hydroxy butanol (10 g, Aldrich) in 50 mL of DMF, TsOH (20 mg, catalytic) and MeOPhCH (OMe) 2 (24 g) were added. After 3h at 35 C on a rotovap with slight vacuum, it was cooled and quenched with aq. Sat. NaHC03. The mixture was extracted with EtOAc (3x). The organic layers were washed with brine (2x), dried and concentrated. The crude product was evaporated with toluene (3x). [0230] The crude product was dissolved in 700 mL of CH2CI2. At 0 C, DIBAL-H solution (200 mL, 1.0 M, excess) was added. The reaction was warmed to room temperature overnight. Then it was quenched with methanol (50 mL), sat. Na2S04 at 0 C. The mixture was diluted with Et20 (1. 5L). After stirred for 5h, it was filtered through a pad of celite. The filtrate was concentrated to give an oil. The oil was purified on silica gel with Hexanes/EtOAc, 10: 1,6 : 1,3 : 1, and 1: 1 to give 24 g of desired product, 343-YW-203

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

Reference£º
Patent; EISAI CO. LTD.; WO2003/76424; (2003); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

Representative example 44: Synthesis of 1-((R)-3-(2-(4-hydroxy-1-((2R,3S)-2- propyl-1-(3-(trifluoromethyl)picolinoyl)-3-(5-(trifluoromethyl)thiophen-3- yloxy)piperidine-3-carbonyl)piperidin-4-yl)phenoxy)butyl)cyclobutanecarboxylic acid A31. Step 1: To a 0C DCM (100 mL) solution of (S)-(+)-1 ,3-Butanol (7g, 77.6 mmol) containing Et^N (14 mL, 1.3equiv) was added drop wise a DCM solution (60 mL) of TsCI (1.05 equiv, 15g). Reaction was warmed-up to Rt and stirred overnight. After 18 hours, the DCM layer was washed with HCI 1.0N (X2), then NaHC03, then brine. Organic layer was dried over MgS04, filtered and concentrated down to 15 g of crude oil. The residue was purified by silica gel chromatography (10% to 40% EtOAc in hexanes) to provide 13 g (69% yield) of (S)-3-hydroxybutyl 4- methylbenzenesulfonate 94.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

Reference£º
Patent; SCHERING CORPORATION; BOGEN, Stephane, L.; MA, Yao; WANG, Yaolin; LAHUE, Brian Robert; NAIR, Latha, G.; SHIZUKA, Manami; VOSS, Matthew Ernst; KIROVA-SNOVER, Margarita; PAN, Weidong; TIAN, Yuan; KULKARNI, Bheemashankar, A.; GIBEAU, Craig, R.; LIU, Yuan; SCAPIN, Giovanna; RINDGEN, Diane; DOLL, Ronald, J.; GUZI, Timothy, J.; HICKLIN, Danny, J.; NOMEIR, Amin; SEIDEL-DUGAN, Cynthia; SHIPPS, Gerald, W., Jr.; MACCOSS, Malcolm; WO2011/46771; (2011); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate