Chiral oxygen ligands

A new synthetic route of (S)-Butane-1,3-diol

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,24621-61-2,(S)-Butane-1,3-diol,its application will become more common.

A common heterocyclic compound, 24621-61-2,(S)-Butane-1,3-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 24621-61-2

General procedure: (R)-Ethyl 3-hydroxybutyrate (2.1 g, 16 mmol) and (R)-1,3 butanediol(1.0 g, 11 mmol) were combined and incubated with CAL-B (0.2 g,400 U) at 80 torr without solvent in a rotary evaporator. The reaction was monitored by withdrawing 5 muL portions of the reaction mixture,which were dissolved in 1.0 mL methanol for analysis by GC-MS. Upon consumption of the diol, the reaction mixture was taken up in dichloromethane,the beads were filtered and washed, and the solventremoved by rotary evaporation. Excess (R)-ethyl 3-hydroxybutyratewas removed by heating to 60 deg C under reduced pressure (1 torr).The residue was suspended in ethyl acetate, treated with activated carbon and filtered to yield (R)-3-hydroxybutyryl-(R)-3-hydroxybutyrateas a clear oil (1.2 g, 62%).

Reference£º
Article; Budin, Noah; Higgins, Erin; DiBernardo, Anthony; Raab, Cassidy; Li, Chun; Ulrich, Scott; Bioorganic Chemistry; vol. 80; (2018); p. 560 – 564;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

New downstream synthetic route of 4254-15-3

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,(S)-Propane-1,2-diol,4254-15-3,its application will become more common.

A common heterocyclic compound, 4254-15-3,(S)-Propane-1,2-diol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 4254-15-3

Triethylamine was added to methylene chloride solution of (2S)-propane-1,2-diol, and then methylene chloride solution of p-toluenesulfonyl chloride was added thereto at -20C and stirred at room temperature for 18 hours to obtain (2S)-2-hydroxypropyl-4-methylbenzene sulfonate. MS(+): 231

Reference£º
Patent; Astellas Pharma Inc.; EP1619185; (2006); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A new synthetic route of (S)-Butane-1,3-diol

To a stirring solution of (S)-1, 3-butanediol (1.0 g, 0.01 MMOL) and triethylamine (1.39 g, 0.014 MMOL) in dichloromethane (10 mL) at-20C was added dropwise p- toluenesulfonyl chloride and the mixture was stirred for 2 h. The reaction mixture was then warmed to RT and stirred overnight. The reaction mixture was poured into cold H20 (20 mL), and extracted three times with DICHLOROMETHANE. The organic extracts were then washed with brine. The organic layer was dried over sodium sulfate, filtered, and concentrated in vacuo to give 2.6 g (96% yield) of title compound as an oil. MS (ESI) 244.8 (M+). The crude tosylat was used without further purification., 24621-61-2

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2004/43939; (2004); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A new synthetic route of (S)-Propane-1,2-diol

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,4254-15-3,(S)-Propane-1,2-diol,its application will become more common.

Compound I (1.5 gm, 3.8 mmol) was dissolved in MTBE (8 mL); the solution was slightly cloudy. To this was added (S)-1,2-propane diol[(S)-PG] (397 mg, 2 mL in MTBE). The reaction was stirred for five minutes; no solid was observed. Optionally, it is preferred, but not entirely necessary to add seed crystals (5 mg), at this stage, as is commonly known to one skilled in the art. Immediately cloudiness appeared and crystallization was observed. The reaction was stirred for 24 hr at room temperature, then filtered, and solid obtained was further dried in a desiccator at RT. A total of 1.10 gm complex was isolated. Mother liquor was cooled and an additional 0.5 gm complex was produced after drying. A total 1.55 gm (83percent) product was isolated.The seed crystals employed may be prepared by dissolving compound I in MTBE and treating the resulting solution with (S)-propylene glycol and proceeding as described above (without seeding) to form crystalline compound Ia.

Reference£º
Patent; Bristol-Myers Squibb Company; US2008/287529; (2008); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The origin of a common compound about 538-58-9

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,538-58-9,1,5-Diphenylpenta-1,4-dien-3-one,its application will become more common.

A common heterocyclic compound, 538-58-9,1,5-Diphenylpenta-1,4-dien-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 538-58-9

General procedure: A solution of N,N-dimethyl barbituric acid (1) (2 mmol) and diarylidene acetone derivatives (2a-p) (2 mmol) in 10 mL of dry CH2Cl2 were charged into a 50 mL round bottom flask under inert atmosphere. Et2NH (2.5 mmol) was then added to the reaction mixture and stirred at room temperature for up to 1.5-2 h, until TLC showed complete consumption of both the reactants. After completion of the reaction, the crude product was directly subjected to column chromatography, using 100-200 mesh silica gel and ethyl acetate/n-hexane (2:8, v/v) as an eluent to afford the pure products 3a-p. The solid products were further crystallized from a mixture of CHCl3/n-heptane. 4.2.1 2,4-Dimethyl-7,11-diphenyl-2,4-diazaspiro[5.5]undecane-1,3,5,9-tetraone (3a) Diarylidene acetone 2a (468.2 mg, 2 mmol) reacted with compound 1 (312.1 mg, 2 mmol) according to GP1 yielded white solid spiro-product 3a (765 mg, 1.96 mmol, 98%); mp 125-127 C; 1H NMR (400 MHz, CDCl3) delta: 2.59 and 2.63 (dd, 2H, J = 15.36 Hz, 4.40 Hz, CH2(e)), 2.85 (s, 3H, -NCH3), 3.01 (s, 3H, -NCH3), 3.72 (t, 2H, J = 14.7 Hz, CH2(a)), 3.99 and 4.03 (dd, 2H, J = 14.7 Hz, 4.40 Hz, CH), 7.06-7.08 (m, 4H, Ar-H), 7.21-7.26 (m, 6H, Ar-H); 13C NMR (100 MHz, CDCl3) delta: 27.98, 28.39, 42.99, 50.55, 60.95, 127.56, 128.69, 128.94, 137.17, 149.70, 169.04, 170.71, 208.29; IR (KBr, cm-1) numax = 2959, 2925, 1716, 1675, 1484, 1422, 1381, 1125, 755, 706; [Anal. Calcd for C23H22N2O4: C, 70.75; H, 5.68; N, 7.17; Found: C, 70.69; H, 5.65; N, 7.01]; LC/MS (ESI, m/z): [M+], calculated 390.21, C23H22N2O4 found 390.16; CCDC-1007513.

Reference£º
Article; Barakat, Assem; Islam, Mohammad Shahidul; Al-Majid, Abdullah Mohammed; Ghabbour, Hazem A.; Fun, Hoong-Kun; Javed, Kulsoom; Imad, Rehan; Yousuf, Sammer; Choudhary, M. Iqbal; Wadood, Abdul; Bioorganic and Medicinal Chemistry; vol. 23; 20; (2015); p. 6740 – 6748;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A new synthetic route of (S)-Butane-1,3-diol

Example 63 (R)-3- {2-CHLORO-4- [3- (4-CHLORO-2-PHENOXY-PHENOXY)-BUTOXY]-PHENYL}-PROPIONIC acid Step A (S) -Acetic acid 3-hydroxy-butyl ester; A mixture of (S)- (+)-1, 3-butanediol (10.0 g, 0.1 mol) and 2,4, 6-collidine (27 g, 0.2 mol) in DCM (100 mL) is cooled to-78 C. The reaction is then treated dropwise with acetyl chloride (10.4 g, 0.13 mol), and stirred for 2hr AT-78 C. The reaction is then allowed to warm to rt and stir for an additional hour. The reaction is then quenched with IN HCl and extracted with DCM. The organic layer is separated, washed with brine, and dried over NA2SO4. The organic is filtered, and the solvent is removed to afford 9.77 g (66%) of acetic acid 3-hydroxy-butyl ESTER. IH NMR (400 MHz, CDC13) ; MS (ES+) NILZ mass calcd for C6HI203 132, found 133 (M + 1).

Reference£º
Patent; ELI LILLY AND COMPANY; WO2005/19151; (2005); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The origin of a common compound about 1,5-Diphenylpenta-1,4-dien-3-one

General procedure: A mixture of unsaturated ketone 1a (60.7 mg, 0.25 mmol) and phosphonium salt 2a (198.6 mg, 0.45 mmol) in CH3CN (2 mL) was stirred for 5 min. Then DBU (127 muL) in CH3CN (0.5 mL) was added. The reaction mixture was stirred at 60 C for 6 h and then air was introduced with a balloon for another 42 h. After the reaction was completed, the reaction mixture was filtered through a short silica gel column and washed with DCM. The filtrate was concentrated under reduced pressure and the residue was purified by flash chromatography (PE/EtOAc, 60/1) to afford 3a as a colorless oil (69.3 mg, 86% yield).

Reference£º
Article; Shu, Zhen-Cao; Zhu, Jian-Bo; Liao, Saihu; Sun, Xiu-Li; Tang, Yong; Tetrahedron; vol. 69; 1; (2013); p. 284 – 292;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The origin of a common compound about 4254-15-3

Zu einer Loesung von 1.50 g (19.7 mmol) S-1, 2-Propandiol in 15 ml Dichlormethan werden 2.75 ml (19.7 mmol) Triethylamin, 0. 10 g (0. 8 MMOL) 4-N, N-Dimethylaminopyridin und 2. 97 G (19.7 mmol) tert. -Butyldimethylsilylchlorid gegeben. Die Reaktionsmischung wird fuer 16 h bei Raumtemperatur geruehrt. Anschliessend wird mit Dichlormethan verduennt und je zweimal mit Wasser, gesaettigter Ammoniumchlorid-Loesung und gesaettigter Natriumhydrogencarbonat-Loesung gewaschen. Die organische Phase wird ueber Natriumsulfat getrocknet und im Vakuum vom Loesungsmittel befreit. Der Rueckstand wird ohne weitere Reinigung in der naechsten Stufe eingesetzt. Ausbeute : 2.55 g, 80% Reinheit (54% d. Th.) GC/MS (Methode 6) : RT = 2.62 min., M/Z = 191 (M+H)+.

Reference£º
Patent; BAYER HEALTHCARE AG; WO2004/80952; (2004); A1;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Some scientific research about 1,5-Diphenylpenta-1,4-dien-3-one

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,5-Diphenylpenta-1,4-dien-3-one,538-58-9,its application will become more common.

538-58-9 A common heterocyclic compound, 538-58-9,1,5-Diphenylpenta-1,4-dien-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: A mixture of malononitrile (2a) (66 mg, 1 mmol), dibenzylideneacetone (6a) (234 mg, 1 mmol), tributylphosphine (25 mL, 0.1 mmol), and anhydrous CH2Cl2 (5.0 mL) was magnetically stirred in a flask under nitrogen atmosphere at room temperature. The reaction progress was monitored by thin layer chromatography (TLC) until the starting materials were completely consumed. Then, the reaction mixture was diluted with H2O (10 mL) and extracted with Et2O (3×10 mL), the organic phase was washed with brine (10 mL), dried over anhydrous Na2SO4. After the removal of the solvent under reduced pressure, the residue was subjected to chromatography on a silica gel (200-300 mesh) column using petroleum ether/ethyl acetate (4:1) as eluent to afford 7a (286 mg, 95% yield) as a light yellow solid (mp 170-171 C).

Reference£º
Article; Xu, Da-Zhen; Zhan, Ming-Zhe; Huang, You; Tetrahedron; vol. 70; 2; (2014); p. 176 – 180;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

New downstream synthetic route of 538-58-9

General procedure: To a solution of dialkyl phosphite (0.01 mol) in anhydrous tetrahydrofuran (30 mL),maintained under a nitrogen atmosphere, sodium (0.02 g) was added and the mixture was stirred at roomtemperature until complete dissolution of sodium. Diarylideneketone 1 (0.01 mol) was then added and themixture heated under reflux for 4 h. After cooling, the reaction mixture was diluted with water (50 mL)and extracted with CHCl3 (2 ¡Á 25 mL). The organic phase was dried over Na2SO4 and concentrated undervacuum. The obtained residue was chromatographed on a silica gel column using a mixture of Et2O andhexane 9:1 as an eluent.

Reference£º
Article; Lamouchi, Imen; Touil, Soufiane; Heterocycles; vol. 94; 5; (2017); p. 894 – 911;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate