Chiral oxygen ligands

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, IUCrData called 2-Sulfanylidene-1,3-dithiolo[4,5-b]pyrazine-5,6-dicarbonitrile, Author is Tomura, Masaaki, which mentions a compound: 56413-95-7, SMILESS is N#CC1=NC(Cl)=C(Cl)N=C1C#N, Molecular C6Cl2N4, HPLC of Formula: 56413-95-7.

In the title compound, C7N4S3, the mol. entity consisting of a 1,3-dithiole-2-thione with a fused pyrazine ring is planar, with an r.m.s. deviation of 0.042 (3) Å from the least-squares plane. In the crystal, mols. are linked via short intermol. S···N contacts [3.251 (4) and 3.308 (3) Å] between the S atom of the thiocarbonyl group and N atoms of the cyano groups.

When you point to this article, it is believed that you are also very interested in this compound(56413-95-7)HPLC of Formula: 56413-95-7 and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Name: 3-Methyl-1H-pyrrole. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Immunochemical Detection of Protein Modification Derived from Metabolic Activation of 8-Epidiosbulbin E Acetate. Author is Zhou, Shenzhi; Zhang, Na; Hu, Zixia; Lin, Dongju; Li, Weiwei; Peng, Ying; Zheng, Jiang.

Furanoid 8-epidiosbulbin E acetate (EEA) is one of the most abundant diterpenoid lactones in herbal medicine Dioscorea bulbifera L. (DB). Our early work proved that EEA could be metabolized to EEA-derived cis-enedial (EDE), a reactive intermediate, which is required for the hepatotoxicity observed in exptl. animals exposed to EEA. Also, we found that EDE could modify hepatic protein by reaction with thiol groups and/or primary amines of protein. The present study was inclined to develop polyclonal antibodies to detect protein modified by EDE. An immunogen was prepared by reaction of EDE with keyhole limpet hemocyanin (KLH), and polyclonal antibodies were raised in rabbits immunized with the immunogen. Antisera collected from the immunized rabbits demonstrated high titers evaluated by enzyme-linked immunosorbent assays (ELISAs). Immunoblot anal. showed that the polyclonal antibodies recognized EDE-modified bovine serum albumin (BSA) in a hapten load-dependent manner but did not cross-react with native BSA. Competitive inhibition experiments elicited high selectivity of the antibodies toward EDE-modified BSA. The antibodies allowed us to detect and enrich EDE-modified protein in liver homogenates obtained from EEA-treated mice. The developed immunoprecipitation technique, along with mass spectrometry, enabled us to succeed in identifying multiple hepatic proteins of animals given EEA. We have successfully developed polyclonal antibodies with the ability to recognize EDE-derived protein adducts, which is a unique tool for us to define the mechanisms of toxic action of EEA.

When you point to this article, it is believed that you are also very interested in this compound(616-43-3)Name: 3-Methyl-1H-pyrrole and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The chemical properties of alicyclic heterocycles are similar to those of the corresponding chain compounds. Compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile, is researched, Molecular C6Cl2N4, CAS is 56413-95-7, about Azaphthalocyanines: Red Fluorescent Probes for Cations, the main research direction is azaphthalocyanine red fluorescent indicator cation.Quality Control of 5,6-Dichloropyrazine-2,3-dicarbonitrile.

Chelation of sodium and potassium cations by aza[15]crown-5 switches on strong red fluorescence in azaphthalocyanines. This is due to an inhibition of ultrafast intramol. charge transfer by coordination of the cations to the donor center. Sodium cations fit well into a cavity of the recognition moiety, while potassium forms supramol. assemblies of azaphthalocyanines with 1:2 stoichiometry.

When you point to this article, it is believed that you are also very interested in this compound(56413-95-7)Quality Control of 5,6-Dichloropyrazine-2,3-dicarbonitrile and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Safety of cis-4-Aminocyclohexane carboxylic acid. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: cis-4-Aminocyclohexane carboxylic acid, is researched, Molecular C7H13NO2, CAS is 3685-23-2, about Characterization of an inhibitory receptor in rat hippocampus. A microiontophoretic study using conformationally restricted amino acid analogs.

The inhibitory potencies of GABA [56-12-2], β-alanine [107-95-9], and glycine [56-40-6] in rat hippocampal pyramidal cells were determined and compared with those of substituted aminocyclopentane and aminocyclohexane carboxylic acids (ACPC and ACHC resp.). The order of effectiveness of the small aliphatic amino acids was GABA > β-alanine > glycine. GABA-induced inhibition was inhibited by iontophoresis of bicuculline or picrotoxin but not strychnine-HCl. The inhibitory abilities of the substituted ACPC and ACHC derivatives was a direct function of the separation of NH2 and CO2H groups in both series of cyclic amino acids. The most potent inhibition was observed when the spatial separation was similar to that of the extended GABA mol. (4.74 Å). Inhibition by (±)-cis-3-aminocyclopentanecarboxylic acid was blocked by simultaneous application of bicuculline or picrotoxin, but not by strychnine-HCl. The physiol. active conformation of GABA is probably the fully extended mol. and one dimension of the postsynaptic receptor site is probably within the range 4.2-4.8 Å.

When you point to this article, it is believed that you are also very interested in this compound(3685-23-2)Safety of cis-4-Aminocyclohexane carboxylic acid and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Pyrrole Syntheses from Amino Ketones with Ketones and Ketone Esters》. Authors are Piloty, O.; Hirsch, P..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).HPLC of Formula: 616-43-3. Through the article, more information about this compound (cas:616-43-3) is conveyed.

The following pyrrole derivatives have been prepared by treating aqueous solutions of the HCl salts of amino ketones containing an excess of alk. with a ketone or ketone ester and allowing to stand a long time at a slightly elevated temperature in closed vessels. α-β’-Dimethylpyrrole, from Ac2NH2.HCl and AcMe; yield, 30%. α-Phenyl-β’-methylpyrrole, from 10 g. AcCH2NH2.HCl and 5 g. AcPh, m. 152°; yield, 1 g. α,β,β’-Trimethylpyrrole, from AcEt; yield, 28%. α-Ethyl-β,β’-dimethylpyrrole, b10 77-8° (yield, 0.4 g. from 14 g. AcCH3NH2.HCl and 10 g. Et2CO); picrjate, bright yellow, striated prisms, m. 122.5°. α,β,α’-Trimethylpyrrole, from AcCHMeNH2 and AcMe; yield, 50%. Some tetramethylpyrazine is formed in this reaction. AcCHMeNH2 and AcEt react only slowly and incompletely; the chief product is the pyrazine, but a little α,β,α’,β’-tetramethylpyrrole picrate (cf. Fischer and Bartholomäus, C. A., 7, 780) was isolated. Et α,β’-dimethylpyrrole-β-carboxylate, from AcCH2NH2 and AcCH2CO2Et. Monoethyl β-methylpyrrole-α’,β’-dicarboxylate, from 19 g. HO2CCOCH2CO2Et and 11 g. AcCH2NH2.HCl, monoclinic prisms, m. 196° (yield, 2-3 g.), converted by 20 hrs. b. with excess of 20% KOH into β-methylpyrrole-β’ (or α’)-carboxylic acid, flocks, m. 149°, losing CO2 and forming β-methylpyrrole, b11 45°. Monoethyl α,β-dimethylpyrrole-α’,β’-dicarboxylate, from AcCHMeNH2 and HO2CCOCH2CO2Et, prisms, m. 201° (loss of CO2). α,β-Dimethylpyrrole-β’ (or α’)-carboxylic acid, m. 188°. α,β-Dimethylpyrrole, b11 62°; picrate, bright yellow, felted needles, m. 146-5°; contrary to all other pyrrole derivatives, it has the comp. C18H21O7N5, i. e., 2 mols. pyrrole: 1 mol. picric acid.

When you point to this article, it is believed that you are also very interested in this compound(616-43-3)HPLC of Formula: 616-43-3 and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The three-dimensional configuration of the ester heterocycle is basically the same as that of the carbocycle. Compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile(SMILESS: N#CC1=NC(Cl)=C(Cl)N=C1C#N,cas:56413-95-7) is researched.Category: amides-buliding-blocks. The article 《Tetra[6,7]quinoxalinoporphyrazines: the effect of an additional benzene ring on photophysical and photochemical properties》 in relation to this compound, is published in European Journal of Organic Chemistry. Let’s take a look at the latest research on this compound (cas:56413-95-7).

Tetrapyrazinophthalocyanines (or tetra[6,7]quinoxalinoporphyrazines, 6,7-TQP) and tetrapyrazinoporphyrazines (TPP), bearing carboxy, alkyl, amino, alkylthio and phenolato substituents were prepared as their zinc complexes by macrocyclization of the corresponding 2,3-disubstituted 6,7-quinoxalinodinitriles and 5,6-disubstituted 2,3-pyrazinedinitriles, resp. Synthetic methods for preparation of the precursor dinitriles were developed. Photophys. and photochem. properties of 6,7-TQP were compared with tetrapyrazinoporphyrazines (TPP) bearing the same peripheral substituents to disclose the effect of insertion of a benzene ring between the pyrazine and porphyrazine moieties. The influence of the peripheral heteroatom in the group of 6,7-TQP is also discussed. Prepared 6,7-TQP have their main absorption band (Q-band) strongly batho- and hyperchromically shifted (λmax = 730-770 nm in pyridine, ε up to 500000 dm3 mol-1cm-1) in comparison to TPP. They showed high singlet oxygen quantum yields (ΦΔ = 0.50-0.74) and relatively low fluorescence quantum yields (ΦF < 0.08). When you point to this article, it is believed that you are also very interested in this compound(56413-95-7)Reference of 5,6-Dichloropyrazine-2,3-dicarbonitrile and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Most of the natural products isolated at present are heterocyclic compounds, so heterocyclic compounds occupy an important position in the research of organic chemistry. A compound: 56413-95-7, is researched, SMILESS is N#CC1=NC(Cl)=C(Cl)N=C1C#N, Molecular C6Cl2N4Journal, ChemistrySelect called Structure-Catalytic Activity in a Series of Push-Pull Dicyanopyrazine/Dicyanoimidazole Photoredox Catalysts, Author is Hlouskova, Zuzana; Tydlitat, Jiri; Kong, Manman; Pytela, Oldrich; Mikysek, Tomas; Klikar, Milan; Almonasy, Numan; Dvorak, Miroslav; Jiang, Zhiyong; Ruzicka, Ales; Bures, Filip, the main research direction is dicyanopyrazine dicyanoimidazole mol photoredox catalytic activity.Formula: C6Cl2N4.

A series of dicyanopyrazine and dicyanoimidazole derived push-pull mols. have been prepared and further investigated as photoredox catalysts. The fundamental properties of the catalysts were studied by DSC, X-ray anal., absorption/emission spectra, and electrochem. and were completed with the DFT results. The catalytic activity has been evaluated in visible light induced α-functionalization of amines (cross-dehydrogenative coupling and annulation reaction of tetrahydroisoquinolines). Thorough structure-property-catalytic activity relationships were elucidated. The developed series of tailored organic photoredox catalysts allows synthetic chemists to perform desired reactions under sustainable and mild conditions employing solely visible light as a source of energy.

When you point to this article, it is believed that you are also very interested in this compound(56413-95-7)Formula: C6Cl2N4 and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Pyrolysis studies. Controlled thermal degradation of mesoporphyrin》. Authors are Whitten, David G.; Bentley, Kenton E.; Kuwada, Daniel.The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Quality Control of 3-Methyl-1H-pyrrole. Through the article, more information about this compound (cas:616-43-3) is conveyed.

The major organic products obtained from thermal decomposition of mesoporphyrin (I) at several temperatures over the range 400-780° were pyrrole, 3-methylpyrrole, dimethylpyrroles, trimethylpyrroles, opsopyrrole (II), cryptopyrrole (III), tetramethylpyrrole, hemopyrrole (IV), and phyllopyrrole (V). Small amounts of MeCN and EtCN were obtained together with moderate yields of CH4, C2H6, and C2H4. The yields of hydrocarbons and nitriles increased with the temperature Thermal decomposition products of I at lower temperatures (400-600°) were the same as those favored in reductive degradation. The pyrroles II-V, formed by cleavage at the methene bridge positions only amounted to 92% of alkylpyrroles formed at 410°. The yield of less characteristic pyrroles increased with elevation of the pyrolysis temperature Spectral examination of the residue failed to show any dipyrrylmethanes or rearranged porphyrins that might be possible intermediates in pyrrole formation. Increase of pyrolysis hot zone by use of a gold baffle caused a less characteristic pyrolysis above 550°. Above 560°, 2,4-dimethyl-3-ethylpyrrole (VI) gave considerable amounts of dimethylpyrrole and methylpyrrole. The products of sealed tube pyrolysis of I in vacuo and in H atm. (450-500 mm. at 20°) heated 1 hr. at 400° were the same as those produced by pyrolysis in dynamic systems at the same temperature Mass spectral determinations of VI and the isomer 2,3,4,5-tetramethyl-pyrrole show that the method served to distinguish between such pairs but not between isomers having the same types of alkyl substituents. The spectra of mesoporphyrin IX and ferric mesoporphyrin IX chloride di-Me ester as obtained using a direct introduction system were similar to previously reported spectra of Ni and Cu etioporphyrins. Relatively high stability of porphyrin pos. and double pos. ions gives rise to little fragmentation of the porphyrin nucleus. The high-resolution mass spectrum of I gives mol. weight and mol. formula, with a fragmentation pattern indicating high stability. Controlled pyrolysis selectivity degrades the porphyrin into pyrrole sub-units, which can be readily identified and used in determining the structure of the parent porphyrin.

When you point to this article, it is believed that you are also very interested in this compound(616-43-3)Quality Control of 3-Methyl-1H-pyrrole and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Arjomandi, Jalal; Holze, Rudolf published an article about the compound: 3-Methyl-1H-pyrrole( cas:616-43-3,SMILESS:CC1=CNC=C1 ).Formula: C5H7N. Aromatic heterocyclic compounds can be classified according to the number of heteroatoms or the size of the ring. The authors also want to convey more information about this compound (cas:616-43-3) through the article.

A Electrosynthesis of conducting poly(3-methylpyrrole) (P3MPy) and poly(3-methylpyrrole-2,6-dimethyl-β-cyclodextrin) (poly(3MPy-β-DMCD)) films on a gold electrode in acetonitrile electrolyte solution containing lithium perchlorate has been carried out by potential cycling. Products were characterized with cyclic voltammetry CV, in situ UV-Vis spectroscopy, and in situ resistance measurements. Electrosynthesis of poly(3MPy-β-DMCD) started with a (1:1) (3MPy-β-DMCD) supramol. cyclodextrin CD complex of 3-methylpyrrole characterized with proton NMR spectroscopy. The oxidation peak of poly(3MPy-β-DMCD) in CVs is shifted to more pos. values than P3MPy. In situ resistance measurements show that the resistance of poly(3MPy-β-DMCD) is higher than of P3MPy by approx. an order of magnitude. Min. resistance can be observed for P3MPy and poly(3MPy-β-DMCD) at 0.40 < EAg/AgCl < 1.10 V and 0.60 < EAg/AgCl < 1.10 V, resp. The higher resistance of P3MPy compared with polypyrrole may result from the presence of the Me group substituent resulting in a decreased conjugation length. When CD is present during synthesis, resistance is even higher. In situ UV-Vis spectroelectrochem. data for both films prepared potentiodynamically by cycling the potential in the range - 0.20 < EAg/AgCl < 1.10 V in acetonitrile electrolyte show major effects of CD presence during electrosynthesis. When you point to this article, it is believed that you are also very interested in this compound(616-43-3)Formula: C5H7N and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Article, Research Support, Non-U.S. Gov’t, Dalton Transactions called Systematic investigation of phthalocyanines, naphthalocyanines, and their aza-analogues. Effect of the isosteric aza-replacement in the core, Author is Novakova, Veronika; Reimerova, Petra; Svec, Jan; Suchan, Daniel; Miletin, Miroslav; Rhoda, Hannah M.; Nemykin, Victor N.; Zimcik, Petr, which mentions a compound: 56413-95-7, SMILESS is N#CC1=NC(Cl)=C(Cl)N=C1C#N, Molecular C6Cl2N4, Category: chiral-oxygen-ligands.

Zinc complexes of phthalocyanine, naphthalocyanine and their aza-analogs with alkylsulfanyl substituents were synthesized and characterized by UV-visible and MCD spectroscopy, and their redox properties were investigated using CV, DPV, and SWV approaches as well as spectroelectrochem. methods. Aggregation, photostability, singlet oxygen production, and fluorescence quantum yields of the target complexes were studied as a function of the stepwise substitution of the aromatic C-H fragments by nitrogen atoms. The electronic structure and vertical excitation energies of the target compounds were probed by DFT-PCM and TDDFT-PCM approaches. Introduction of addnl. nitrogens into the structure leads to a hypsochromic shift of the Q-band and makes the macrocycle strongly electron deficient and more photostable. The impact on the photophysics is limited. The relations between the type of macrocycle and the studied properties were defined.

When you point to this article, it is believed that you are also very interested in this compound(56413-95-7)Category: chiral-oxygen-ligands and due to space limitations, I can only present the most important information.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate