Extended knowledge of 3685-23-2

As far as I know, this compound(3685-23-2)Formula: C7H13NO2 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Activation of the amide group by acylation. V. Inclusion of amino acid residues into linear and cyclic peptides》. Authors are Antonov, V. K.; Agadzhanyan, Ts. E.; Telesnina, T. R.; Shemyakin, M. M..The article about the compound:cis-4-Aminocyclohexane carboxylic acidcas:3685-23-2,SMILESS:N[C@H]1CC[C@H](CC1)C(O)=O).Formula: C7H13NO2. Through the article, more information about this compound (cas:3685-23-2) is conveyed.

cf. CA 63, 16255f. Dipeptides and lactams acylated at the amide-N by amino acid residues were shown to isomerize to give corresponding linear or cyclic peptides through intermediate azocyclols, which can also undergo dehydration to form acylamidines. The transannular interaction of amide groups in 9-10-membered cyclopeptides can also result in similar acylamidines; such a process takes place during mass spectrometry of cyclopeptides. N-Phthaloylglycylglycine Et ester and azidoacetyl chloride refluxed in MePh 10 hrs. gave after filtration and evaporation 46% N-azidoacetyl-N’-phthaloylglycylglycine Et ester, m. 115-16°. Similarly were prepared 36% N-azidoacetyl-N’-phthaloylglycyl-L-leucine Et ester, m. 118-19°. The former treated with 28% HBr in AcOH overnight in the cold, diluted with Et2O, and the resulting precipitate (I) treated with Et3N in tetrahydrofuran gave 70% N-phthaloylglycylglycylglycine Et ester, m. 228-9°. Similarly was prepared N-phthaloylglycylglycyl-L-leucine Et ester, m. 155-6°. I and H2O in 5 min. gave 73% 2-phthaloylaminomethyl-3-carbethoxymethyl-Δ1-imidazolin-4-one, m. 153-4°. Similarly was obtained 63% 2-phthaloylaminomethyl-3-(1-carbethoxy-3-methylbutyl)-Δ1-imidazolin-4-one, m. 117-18°. Carbobenzoxy-β-alanyl chloride and butyrolactam in Et2O were treated at 5° with Et3N to yield in 1 day at 20° 58% N-carbobenzoxy-β-alanylbutyrolactam (II), m. 94-5°. Similar reaction with valerolactam gave N-carbobenzoxy-β-alanylvalerolactam, m. 60-1°. Similarly was prepared 50% N-carbobenzoxy-β-alanylcaprolactam, m. 60-1°. II hydrogenated over Pd in Et2O gave 38% cyclo(β-alanyl-γ-aminobutyryl) (III), m. 173°, also formed from II by treatment with 27% HBr in AcOH 45 min.; HBr salt m. 119-20°. Similarly was obtained cyclo(β-alanyl-δ-aminovaleryl) (IV), m. 187°, and 61% cyclo(β-alanyl-ε-aminocaproyl) (V), m. 259°. III heated in xylene 1 hr. under azeotropic conditions of H2O removal gave 68% 1,2-trimethylene-6-oxo-1,4,5,6-tetrahydropyrimidine (IIIa), b12 152-4°. IV similarly gave 45% 1,2-tetramethylene-6-oxo-1,4,5,6-tetrahydropyrimidine (IVa), b12 160° (no reaction took place in ο-Cl2C6H4 in 4 hrs. with V). III heated with H2O 5 min. gave 80% N-[1-aza-1-cyclopenten-2-yl]-3-aminopropionic acid (VI), decomposed 186-7°. H2NCH2CH2CO2H in MeOH was treated with O-methylbutyrolactam and gave after heating 10 min. 97% VI. Similarly O-methylvalerolactam gave 95% N-[1-aza-1-cyclohexen-2-yl]-3-aminopropionic acid, m. 186°, which heated with removal of H2O in Cl2C6H4 gave 91% IVa. Similarly O-methylcaprolactam gave 93% N-[1-aza-1-cyclohepten-2-yl]-3-aminopropionic acid, m. 200-1°, which heated in Cl2C6H4 gave 12% cyclo(β-alanyl-ε-aminocapropyl) and 80% 1,2-pentamethylene-6-oxo-1,4,5,6-tetrahydropyrimidine, b10 185-90°, m. 35°. Heating VI in xylene with removal of H2O gave IIIa. The latter kept with H2O 2 days gave VI, while H2O-Ag2O gave 32% VI and 54% cyclo(β-alanyl-γ-aminobutyryl). The above analogs of VI reacted similarly.

As far as I know, this compound(3685-23-2)Formula: C7H13NO2 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Awesome Chemistry Experiments For 56413-95-7

As far as I know, this compound(56413-95-7)COA of Formula: C6Cl2N4 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

COA of Formula: C6Cl2N4. The protonation of heteroatoms in aromatic heterocycles can be divided into two categories: lone pairs of electrons are in the aromatic ring conjugated system; and lone pairs of electrons do not participate. Compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile, is researched, Molecular C6Cl2N4, CAS is 56413-95-7, about Structure-Property Relationships and Nonlinear Optical Effects in Donor-Substituted Dicyanopyrazine-Derived Push-Pull Chromophores with Enlarged and Varied π-Linkers. Author is Bures, Filip; Cermakova, Hana; Kulhanek, Jiri; Ludwig, Miroslav; Kuznik, Wojciech; Kityk, Iwan V.; Mikysek, Tomas; Ruzicka, Ales.

Thirteen new, stable, push-pull systems featuring dimethylamino and pyrazine-2,3-dicarbonitrile moieties as the donor and acceptor, resp., and systematically extended and varied π-linkers were prepared and studied. Evaluation of the measured UV/Vis spectra, electrochem. data (cyclic voltammetry, rotating disk voltammetry, and polarog.), x-ray data, and exptl. determined and calculated hyperpolarizability values enabled structure-property studies; these revealed some important structural features that affected the efficiency of intramol. charge-transfer and nonlinear optical properties in this class of heterocyclic push-pull chromophores. The charge-transfer transition was most significantly affected by structural features such as π-linker length, chromophore planarity, and the number of 1,4-phenylene/ethynylene subunits in the π-linker.

As far as I know, this compound(56413-95-7)COA of Formula: C6Cl2N4 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Share an extended knowledge of a compound : 616-43-3

As far as I know, this compound(616-43-3)Category: chiral-oxygen-ligands can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Category: chiral-oxygen-ligands. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 3-Methyl-1H-pyrrole, is researched, Molecular C5H7N, CAS is 616-43-3, about Analysis of the NMR spectrum of 3-methylpyrrole. Author is Fukui, H.; Shimokawa, S.; Sohma, J.; Twadare, T.; Esumi, N..

Earlier work (F., S., S., 1970) on pyrrole and on its 2-derivatives is extended to 3-methylpyrrole. Observed and simulated spectra are shown for the N-decoupled spectra at 60 MHZ, and for the N-H proton in which the 14N nucleus and Me protous were decoupled and the 5-proton was perturbed. The chem. shills and coupling constants are tabulated. The best simulated spectrum is a 7-spin system. The compound was dissolved in acetone-d, with Me4Si as internal reference

As far as I know, this compound(616-43-3)Category: chiral-oxygen-ligands can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

The Best Chemistry compound: 616-43-3

As far as I know, this compound(616-43-3)Category: chiral-oxygen-ligands can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Synthesis of furan amines and their catalytic conversion into five-membered nitrogenous heterocycles》. Authors are Shuikin, N. I.; Petrov, A. D.; Glukhovtsev, V. G.; Bel’skii, I. F.; Skobtsova, G. E..The article about the compound:3-Methyl-1H-pyrrolecas:616-43-3,SMILESS:CC1=CNC=C1).Category: chiral-oxygen-ligands. Through the article, more information about this compound (cas:616-43-3) is conveyed.

CH2:CHCHO added to sylvan in AcOH in the presence of hydroquinone at 40° gave after 2 hrs. 65% 2-methyl-5-(3-oxopropyl)furan, b4 58°, n20D 1.4762, d20 1.0360; with 50% H2SO4 as a catalyst, the yield was 43%. The latter catalyst with crotonaldehyde similarly gave 53% 2-methyl-5-(1-methyl-3-oxopropyl)furan, b3 67°, 1.4730, 1.0093, while mesityl oxide gave 75% 2-methyl-5-(1,1-dimethyl-3-oxobutyl)furan, b2 61°, 1.4700, 0.9747. These carbonyl derivatives were hydrogenated in MeOH saturated with NH3 over Raney Ni at 100-50 atm. and 80° and gave: 2-methyl-5-(3-aminopropyl)-furan, b6 82°, 1.4840, 0.9758; 2-methyl-5-(1-methyl-3-amino-propyl)furan, b7 85°, 1.4800, 0.9591; 2-methyl-5-(1,1-dimethyl-3-aminobutyl)furan, b4 75°, 1.4741, 0.9365. The latter was hydrogenated at 250° over 15% Pt-asbestos to 2,4,4-trimethyl-5-butylpyrrolidine, b5 39°, 1.4444, 0.8319. Raman spectra of the products were reported.

As far as I know, this compound(616-43-3)Category: chiral-oxygen-ligands can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Analyzing the synthesis route of 616-43-3

As far as I know, this compound(616-43-3)Recommanded Product: 3-Methyl-1H-pyrrole can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: 3-Methyl-1H-pyrrole( cas:616-43-3 ) is researched.Recommanded Product: 3-Methyl-1H-pyrrole.Nguyen, Thuy; Stahl, Wolfgang; Nguyen, Ha Vinh Lam; Kleiner, Isabelle published the article 《14N nuclear quadrupole coupling and methyl internal rotation in 3-methylpyrrole investigated by microwave spectroscopy》 about this compound( cas:616-43-3 ) in Journal of Molecular Spectroscopy. Keywords: methylpyrrole nuclear quadrupole coupling. Let’s learn more about this compound (cas:616-43-3).

The mol. structure of 3-methylpyrrole in the gas phase has been determined using a combination of high-resolution spectroscopy and quantum chem. calculations The rotational spectrum was recorded using a mol. jet Fourier transform microwave spectrometer covering the frequency range from 2.0 to 26.5 GHz. The exptl. data were analyzed using the programs XIAM and BELGI-Cs-hyperfine. Because the internal rotor axis accidentally lies along the principal a-axis of inertia, the rho axis system and the principal axis system coincide, enabling a direct comparison of the fits. With the program XIAM, the rotational constants A = 8631.1629(12), B = 3342.19750(43), and C = 2445.73846(42) MHz were obtained. Torsional splittings due to internal rotation of the Me group were observed, leading to the determination of the V3 potential of 245.92445(31) cm-1. Hyperfine splittings arising from the nuclear quadrupole coupling of the 14N nucleus could be resolved, and the quadrupole coupling constants χaa = 1.4159(49) and χbb – χcc = 4.1622(86) MHz were found.

As far as I know, this compound(616-43-3)Recommanded Product: 3-Methyl-1H-pyrrole can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Discover the magic of the 56413-95-7

As far as I know, this compound(56413-95-7)Safety of 5,6-Dichloropyrazine-2,3-dicarbonitrile can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Safety of 5,6-Dichloropyrazine-2,3-dicarbonitrile. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile, is researched, Molecular C6Cl2N4, CAS is 56413-95-7, about 2-Sulfanylidene-1,3-dithiolo[4,5-b]pyrazine-5,6-dicarbonitrile. Author is Tomura, Masaaki.

In the title compound, C7N4S3, the mol. entity consisting of a 1,3-dithiole-2-thione with a fused pyrazine ring is planar, with an r.m.s. deviation of 0.042 (3) Å from the least-squares plane. In the crystal, mols. are linked via short intermol. S···N contacts [3.251 (4) and 3.308 (3) Å] between the S atom of the thiocarbonyl group and N atoms of the cyano groups.

As far as I know, this compound(56413-95-7)Safety of 5,6-Dichloropyrazine-2,3-dicarbonitrile can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Application of 56413-95-7

This literature about this compound(56413-95-7)Related Products of 56413-95-7has given us a lot of inspiration, and I hope that the research on this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile) can be further advanced. Maybe we can get more compounds in a similar way.

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Hamdoush, Mahmoud; Ivanova, Svetlana S.; Koifman, Oskar I.; Kos’kina, Marina; Pakhomov, Georgy L.; Stuzhin, Pavel A. researched the compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile( cas:56413-95-7 ).Related Products of 56413-95-7.They published the article 《Synthesis, spectral and electrochemical study of perchlorinated tetrapyrazinoporphyrazine and its AlIII, GaIII and InIII complexes》 about this compound( cas:56413-95-7 ) in Inorganica Chimica Acta. Keywords: preparation aluminum gallium indium perchlorinated tetrapyrazinoporphyrazine complex; cyclic voltammetry aluminum gallium indium perchlorinated tetrapyrazinoporphyrazine complex. We’ll tell you more about this compound (cas:56413-95-7).

Complexes of octachloro substituted tetrapyrazinoporphyrazine with AlIII, GaIII and InIII (2a-c, (I: 2, 4, and 5)) were synthesized by direct melting of 5,6-dichloro-2,3-dicarbonitrile (1) with corresponding metal salt (AlIII chloride, GaIII and InIII hydroxydiacetates). Metal free macrocycle (II: 3) was prepared by catalytic demetalation of the InIII complex 2c (5) in the presence of chloride ions. Introduction of eight chlorine atoms to the peripheral positions of the TPyzPA macrocycle leads to a bathochromic shift of the Q band by 10-15 nm indicating narrowing of the HOMO-LUMO gap by 210-260 cm-1. The presence of eight electroneg. chlorine atoms facilitates the reduction of the TPyzPA macrocycle leading to the considerable pos. shift of the 1st reduction potentials for the metal complexes 2a-c (2, 4, and 5)(E1/2 approx. -0.16 V vs. Ag/AgCl in DMSO) and for the metal free macrocycle 3 (E1/2 = -0.04 V vs. Ag/AgCl in DMSO).

This literature about this compound(56413-95-7)Related Products of 56413-95-7has given us a lot of inspiration, and I hope that the research on this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

More research is needed about 56413-95-7

This literature about this compound(56413-95-7)Formula: C6Cl2N4has given us a lot of inspiration, and I hope that the research on this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile) can be further advanced. Maybe we can get more compounds in a similar way.

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Article, Dalton Transactions called One-dimensional single-helix coordination polymer self-assembled by a crown-ether appended-N-heteroacene radical anion, Author is Isoda, Kyosuke; Takahashi, Hinako; Mutoh, Yuichiro; Hoshino, Norihisa; Akutagawa, Tomoyuki, which mentions a compound: 56413-95-7, SMILESS is N#CC1=NC(Cl)=C(Cl)N=C1C#N, Molecular C6Cl2N4, Formula: C6Cl2N4.

A crown-ether appended N-heteroacene 1 was reduced in the presence of NaBPh4 to the radical anion 2 by accepting one electron transferred from both the cathode and BPh4- as a reductant. The obtained radical anion 2 can function as a radical anion ligand to bridge two sodium ions to self-assemble into one-dimensional helical coordination polymers.

This literature about this compound(56413-95-7)Formula: C6Cl2N4has given us a lot of inspiration, and I hope that the research on this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Final Thoughts on Chemistry for 616-43-3

This literature about this compound(616-43-3)Recommanded Product: 616-43-3has given us a lot of inspiration, and I hope that the research on this compound(3-Methyl-1H-pyrrole) can be further advanced. Maybe we can get more compounds in a similar way.

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: 3-Methyl-1H-pyrrole( cas:616-43-3 ) is researched.Recommanded Product: 616-43-3.Liu, Dachun; Lash, Timothy D. published the article 《Conjugated Macrocycles Related to the Porphyrins. 25.Proton NMR Spectroscopic Evidence for a Preferred [18]Annulene Substructure in Carbaporphyrins from the Magnitude of Selected 4JH,H CH:C-CH3 Coupling Constants》 about this compound( cas:616-43-3 ) in Journal of Organic Chemistry. Keywords: benzocarbaporphyrin preparation NMR. Let’s learn more about this compound (cas:616-43-3).

Two new benzocarbaporphyrins with four or five alkyl substituents have been synthesized by the “”3 + 1″” MacDonald methodol. At lower temperatures, the proton NMR spectrum of the asym. substituted carbaporphyrin I gave two NH resonances, while carbaporphyrin II, which retains a plane of symmetry, gave only one resonance of this kind. As no addnl. peaks were seen for the remaining protons, these data strongly support the proposal that a single tautomer predominates in solution where the two NH protons flank the interior CH. Carbaporphyrin I, which has a CH:CMe unit on the pyrrolic ring opposite the indene moiety, gave a long-range coupling constant of 4JMe,H = 1.3-1.4 Hz. On the other hand, the CH:CMe units of II, which correspond to the pyrrole rings on each side of the carbocyclic moiety, gave 4JMe,H = 0.9-1.0 Hz. These values are in accord with those expected if the exterior carbon-carbon bonds of the pyrrole units next to the indene ring are part of a fully delocalized 18π electron system, while the C:C bond of the remaining pyrrole ring retains substantial olefinic character.

This literature about this compound(616-43-3)Recommanded Product: 616-43-3has given us a lot of inspiration, and I hope that the research on this compound(3-Methyl-1H-pyrrole) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate

Simple exploration of 56413-95-7

This literature about this compound(56413-95-7)Computed Properties of C6Cl2N4has given us a lot of inspiration, and I hope that the research on this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile) can be further advanced. Maybe we can get more compounds in a similar way.

Computed Properties of C6Cl2N4. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: 5,6-Dichloropyrazine-2,3-dicarbonitrile, is researched, Molecular C6Cl2N4, CAS is 56413-95-7, about Structure-Property Relationships and Nonlinear Optical Effects in Donor-Substituted Dicyanopyrazine-Derived Push-Pull Chromophores with Enlarged and Varied π-Linkers. Author is Bures, Filip; Cermakova, Hana; Kulhanek, Jiri; Ludwig, Miroslav; Kuznik, Wojciech; Kityk, Iwan V.; Mikysek, Tomas; Ruzicka, Ales.

Thirteen new, stable, push-pull systems featuring dimethylamino and pyrazine-2,3-dicarbonitrile moieties as the donor and acceptor, resp., and systematically extended and varied π-linkers were prepared and studied. Evaluation of the measured UV/Vis spectra, electrochem. data (cyclic voltammetry, rotating disk voltammetry, and polarog.), x-ray data, and exptl. determined and calculated hyperpolarizability values enabled structure-property studies; these revealed some important structural features that affected the efficiency of intramol. charge-transfer and nonlinear optical properties in this class of heterocyclic push-pull chromophores. The charge-transfer transition was most significantly affected by structural features such as π-linker length, chromophore planarity, and the number of 1,4-phenylene/ethynylene subunits in the π-linker.

This literature about this compound(56413-95-7)Computed Properties of C6Cl2N4has given us a lot of inspiration, and I hope that the research on this compound(5,6-Dichloropyrazine-2,3-dicarbonitrile) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Synthesis and Crystal Structure of a Chiral C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis,
Chiral lanthanide(III) complexes of sulphur–nitrogen–oxygen ligand derived from aminothiourea and sodium D-camphor-β-sulfonate