M.W:200-300 | Page 140 of 144 | Chiral oxygen ligands

Some scientific research about 1,5-Diphenylpenta-1,4-dien-3-one

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,538-58-9,1,5-Diphenylpenta-1,4-dien-3-one,its application will become more common.

538-58-9 A common heterocyclic compound, 538-58-9,1,5-Diphenylpenta-1,4-dien-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

General procedure: General procedure (GP): Dienones 2a-m (0.25 mmol) and diamide 1a or 1b (74 mg, 0.25 mmol)were dissolved in 10 mL of dry CH2Cl2 in a 25 mL round bottom flask. DBU (3 eq, 114 mg, 0.75 mmol)was added to the reaction, which was subsequently stirred for 2-3 h. After the reaction was completedas determined by TLC, the crude material was subjected to column chromatography using ethylacetate/n-hexane (2:3) to give the desired compounds 3a-m.

Reference£º
Article; Al-Majid, Abdullah Mohammed; Islam, Mohammad Shahidul; Atef, Saleh; El-Senduny, Fardous F.; Badria, Farid A.; Elshaier, Yaseen A. M. M.; Ali; Barakat, Assem; Motiur Rahman; Molecules; vol. 24; 7; (2019);,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Some scientific research about 1,5-Diphenylpenta-1,4-dien-3-one

General procedure: A Schlenk tube with a magnetic stir bar charged with alpha,beta-unsaturated carbonyl compounds (0.5 mmol, 1 equiv), tosyl hydrazide (0.6 mmol, 1.2 equiv), NaOH (1.5 equiv), (n-Bu)4NBr (1.5 equiv). The reaction vessel was placed in an 80 C oil bath, and then stirring at this temperature for 10 h. The reaction mixture was then allowed to cool to ambient temperature, and diluted with 20 mL of ethyl acetate, and washed with brine (15 mL), water (15 mL), and then the organic layer was dried over Na2SO4. After concentrated in vacuo, the crude product was purified by column chromatography. The identity and purity of the known product was confirmed by 1H NMR, 13C NMR, and GC-MS., 538-58-9

Reference£º
Article; Wen, Jun; Fu, Yun; Zhang, Ruo-Yi; Zhang, Ji; Chen, Shan-Yong; Yu, Xiao-Qi; Tetrahedron; vol. 67; 49; (2011); p. 9618 – 9621;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The origin of a common compound about 538-58-9

A common heterocyclic compound, 538-58-9,1,5-Diphenylpenta-1,4-dien-3-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 538-58-9

Bis(dibenzylideneacetone)palladium(0) (Pd(dba)2)was synthesized by reducing PdCl2 with methanol in thepresence of sodium acetate and dba [30]. Dibenzylideneacetone(3.4500 g, 1.472 ¡Á 10-2 mol), sodium acetatetrihydrate (4.8525 g, 3.568 ¡Á 10-2 mol), and methanol(113 mL) were placed in a two-neck round-bottomflask. The reaction mixture was stirred at 50C for 45-60 min to obtain a solution, and PdCl2 (0.7875 g,4.434 ¡Á 10-3 mol) was added. The resulting solutionwas stirred in an argon atmosphere at 40C for 4 h.This yielded a dark violet precipitate of the Pd(dba)2complex, which was collected on a fritted glass filterunder argon, washed with water and acetone, andvacuum-dried (30C/2-3 Torr) for 3 h. The productyield was 2.4 g. (94% of the theoretical yield); m =152C. According to the literature, m of thePd(dba)2 complex is 152C [31]. UV spectra:Pd(dba)2, 525 nm (d ? d* transition, epsilon525 =6400 L mol-1 cm-1); non-coordinated dba, 325 nm(n ? pi* transition, epsilon325 = 33540 L mol-1 cm-1).

Reference£º
Article; Skripov; Belykh; Sterenchuk; Akimov; Tauson; Schmidt; Kinetics and Catalysis; vol. 58; 1; (2017); p. 34 – 45; Kinet. Katal.; vol. 58; 1; (2017); p. 36 – 48,13;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

Some scientific research about 1,5-Diphenylpenta-1,4-dien-3-one

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1,5-Diphenylpenta-1,4-dien-3-one,538-58-9,its application will become more common.

538-58-9, General procedure: A mixture of unsaturated ketone 1a (60.7 mg, 0.25 mmol) and phosphonium salt 2a (198.6 mg, 0.45 mmol) in CH3CN (2 mL) was stirred for 5 min. Then DBU (127 muL) in CH3CN (0.5 mL) was added. The reaction mixture was stirred at 60 C for 6 h and then air was introduced with a balloon for another 42 h. After the reaction was completed, the reaction mixture was filtered through a short silica gel column and washed with DCM. The filtrate was concentrated under reduced pressure and the residue was purified by flash chromatography (PE/EtOAc, 60/1) to afford 3a as a colorless oil (69.3 mg, 86% yield).

Reference£º
Article; Shu, Zhen-Cao; Zhu, Jian-Bo; Liao, Saihu; Sun, Xiu-Li; Tang, Yong; Tetrahedron; vol. 69; 1; (2013); p. 284 – 292;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A new synthetic route of 1,5-Diphenylpenta-1,4-dien-3-one

General procedure: A mixture of divinyl ketone (0.5 mmol), indolin-2-one (0.6 mmol)and cesium carbonate (0.5 mmol) in methylene chloride (5 mL) wasstirred at room temperature for the appropriate time. Then the resultingmixture was extracted with ethyl acetate (2 ¡Á 5 mL). The combinedorganic layers were dried over anhydrous magnesium sulfate andconcentrated under reduced pressure. The residues were isolated bycolumn chromatography using petroleum ether and ethyl acetate (v/v5 : 1) as eluent to give the pure product.2,6-Diphenylspiro[cyclohexane-1,3?-indoline]-2?,4-dione (2a): Whitesolid; m.p. 216-218 C; 1H NMR (600 MHz, CDCl3): delta 8.70 (s, 1H),7.23-7.20 (m, 3H), 7.00-6.95 (m, 6H), 6.90 (d, J = 7.3 Hz, 2H), 6.72 (t,J = 7.6 Hz, 1H), 6.56 (d, J = 7.7 Hz, 1H), 6.21 (d, J = 7.6 Hz, 1H), 3.96(t, J = 14.3 Hz, 1H), 3.80 (dd, J = 14.0, 3.7 Hz, 1H), 3.69 (t, J = 6.0 Hz,1H), 3.62 (dd, J = 16.1, 6.0 Hz, 1H), 2.99 (dd, J = 16.1, 5.9 Hz, 1H),2.72 (dd, J = 15.8, 3.4 Hz, 1H); 13C NMR (150 MHz, CDCl3): delta 211.4,180.9, 140.2, 139.9, 138.0, 130.0, 129.3, 128.2, 128.1, 128.0, 127.9,127.4, 127.2, 125.9, 121.4, 109.3, 56.0, 46.6, 45.5, 42.7, 41.9; Anal.calcd for C25H21NO2: C, 81.72; H, 5.76; N, 3.81; found: C, 81.66; H,5.78; N, 3.80%.

Reference£º
Article; Li, Zheng; Li, Jiasheng; Yang, Jingya; Journal of Chemical Research; vol. 41; 3; (2017); p. 168 – 171;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The origin of a common compound about 538-58-9

General procedure: To a stirred solution of alpha,beta-unsaturated carbonyl compound (1 mmol) in DCM was added thiophenol (2.5 mmol, 275 mg) followed by sodium metal (2.5 mmol, 57.5 mg) at room temperature. The reaction mixture was stirred appropriate time given in Table 3. TLC monitoring, after completion of reaction filtered excess amount of sodium then the reaction mixture was quenched with water and extracted with DCM (3 ¡Á 8 ml), washed with brine solutions (10 ml). The combined organic layers dried over anhydrous Na2SO4 and the solvent evaporated in vacuo. Pure sulfide was obtained by recrystallization from methanol.

Reference£º
Article; Konduru, Naveen Kumar; Dey, Sunita; Sajid, Mohammad; Owais, Mohammad; Ahmed, Naseem; European Journal of Medicinal Chemistry; vol. 59; (2013); p. 23 – 30;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

The origin of a common compound about 538-58-9

538-58-9, Step 1. Under a nitrogen atmosphere, add 8 L of absolute ethanol and 0.112 kg of anhydrous sodium acetate to a glass reactor heated in a water bath.When the system temperature was heated to 68 C, 0.92 kg of dibenzylideneacetone obtained in Example 1 was added.After stirring for 30 minutes, add ice to the water bath heater to quickly cool the system down to 60 C.Then, 0.2 kg of palladium dichloride prepared in Example 1 was added and reacted at 60 C for 2 hours.Funnel filtration gave bis (dibenzylideneacetone) palladium (0);

Reference£º
Patent; Xi’an Kaili New Materials Co., Ltd.; Zhang Jielan; Chen Dan; Yan Pandun; Xiao Dawei; Li Yuefeng; Wan Kerou; (6 pag.)CN110256503; (2019); A;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A new synthetic route of 1,5-Diphenylpenta-1,4-dien-3-one

General procedure: A mixture of malononitrile (2a) (66 mg, 1 mmol), dibenzylideneacetone (6a) (234 mg, 1 mmol), tributylphosphine (25 mL, 0.1 mmol), and anhydrous CH2Cl2 (5.0 mL) was magnetically stirred in a flask under nitrogen atmosphere at room temperature. The reaction progress was monitored by thin layer chromatography (TLC) until the starting materials were completely consumed. Then, the reaction mixture was diluted with H2O (10 mL) and extracted with Et2O (3×10 mL), the organic phase was washed with brine (10 mL), dried over anhydrous Na2SO4. After the removal of the solvent under reduced pressure, the residue was subjected to chromatography on a silica gel (200-300 mesh) column using petroleum ether/ethyl acetate (4:1) as eluent to afford 7a (286 mg, 95% yield) as a light yellow solid (mp 170-171 C).

Reference£º
Article; Xu, Da-Zhen; Zhan, Ming-Zhe; Huang, You; Tetrahedron; vol. 70; 2; (2014); p. 176 – 180;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A new synthetic route of 1,5-Diphenylpenta-1,4-dien-3-one

General procedure: In a general procedure, dibenzylidene acetone (1 mmol), N,N-dimethylbarbituric acid/barbituric acid/thiobarbituric acid(1 mmol) and 4 mL of ethanol:water (1:1) were taken in a 50 mL round-bottomed flask. 10 mol% of tetrabutyl ammonium bromide (TBAB) was added to the mixture, and the contents were stirred. The reaction mixture was refluxed and the progress of the reaction was monitored by TLC using ethyl acetate:petroleum ether (30:70) as eluent for disappearance of active methylene compounds. After completion of the reaction, the reaction mixture was allowed to cool to room temperature and diluted with water (5 mL). The solid obtained was filtered at pump and washed with water:ethanol (2:1). The product was recrystallized with ethanol. The products were characterized by their spectral data.

Reference£º
Article; Aggarwal, Komal; Khurana, Jitender M.; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 143; (2015); p. 288 – 297;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate

A new synthetic route of 1,5-Diphenylpenta-1,4-dien-3-one

General procedure: 9-Amino(9-deoxy)-epi-quinine (6.5 mg, 0.02 mmol), divinyl ketone 1 (0.1 mmol), nitromethane (262 muL, 3.0 mmol), Proton-sponge (4.3 mg, 0.02 mmol) and benzoic acid (4.9 mg, 0.04 mmol) were dissolved in chlorobenzene (238muL). After stirred at 40 oC for 144 h, the reaction mixture was purified by flash chromatography on silica gel (EtOAc/petroleum ether).

Reference£º
Article; Yao, Yongqi; Liu, Yingying; Ye, Ling; Chen, Feng; Li, Xinying; Zhao, Zhigang; Li, Xuefeng; Tetrahedron; vol. 73; 16; (2017); p. 2311 – 2315;,
Synthesis and Crystal Structure of a Chiral?C3-Symmetric Oxygen Tripodal Ligand and Its Applications to Asymmetric Catalysis
Chiral lanthanide(III) complexes of sulphur¨Cnitrogen¨Coxygen ligand derived from aminothiourea and sodium?D-camphor-¦Â-sulfonate